1、July 2014 Translation by DIN-Sprachendienst.English price group 19No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 6
2、7.260!%784“2202117www.din.deDDIN EN 12042Food processing machinery Automatic dough dividers Safety and hygiene requirements;English version EN 12042:2014,English translation of DIN EN 12042:2014-07Nahrungsmittelmaschinen Teigteilmaschinen Sicherheits- und Hygieneanforderungen;Englische Fassung EN 12
3、042:2014,Englische bersetzung von DIN EN 12042:2014-07Machines pour les produits alimentaires Diviseuses automatiques Prescriptions relatives la scurit et lhygine;Version anglaise EN 12042:2014,Traduction anglaise de DIN EN 12042:2014-07SupersedesDIN EN 12042:2011-06www.beuth.deIn case of doubt, the
4、 German-language original shall be considered authoritative.Document comprises 50 pages 06.14 DIN EN 12042:2014-07 2 A comma is used as the decimal marker. National foreword This standard includes safety requirements. This document (EN 12042:2014) has been prepared by Technical Committee CEN/TC 153
5、“Machinery intended for use with foodstuffs and feed” (Secretariat: DIN, Germany). The responsible German body involved in its preparation was the Normenausschuss Maschinenbau (Mechanical Engineering Standards Committee), Working Committee NA 060-18-01 AA Bckereimaschinen of Section Nahrungsmittelma
6、schinen und Verpackungsmaschinen. Representatives of manufacturers and users of bakery equipment, and of the employers liability insurance associations contributed to this standard. This standard contains specifications meeting the essential requirements set out in Annex I of the “Machinery Directiv
7、e”, Directive 2006/42/EC, and which apply to machines that are either first placed on the market or commissioned within the EEA. This standard serves to facilitate proof of compliance with the essential requirements of that directive. Once this standard is cited in the Official Journal of the Europe
8、an Union, it is deemed a “harmonized” standard and thus, a manufacturer applying this standard may assume compliance with the requirements of the Machinery Directive (“presumption of conformity”). The European Standards referred to in Clause 2 and in the Bibliography of the EN have been published as
9、 the corresponding DIN EN or DIN EN ISO Standards with the same number. Where the International Standards referred to are not also DIN ISO Standards with the same number, there are no national standards available. Amendments This standard differs from DIN EN 12042:2011-06 as follows: a) normative re
10、ferences have been updated; b) Clause 4: new presentation in a table; c) Subclause 5.2.2, zone 1: the requirements are the same whether the loading of the machine is manual or automatic; addition of new requirements for pressure sensitive edge (see 5.2.2.2.2), AOPD (see 5.2.2.2.3), cleaning of the h
11、opper (see 5.2.2.2.6) and feeding assistance device inside the hopper (see 5.2.2.2.7); new stopping time 0,35 s; new performance level d. d) Subclause 5.2.3, zone 2: the former Table 1 “Dimensions of the guard or tunnel” has been replaced by a reference to EN ISO 13857; e) Subclause 7.2 “Instruction
12、 handbook” has been updated (environmental information). Previous editions DIN EN 12042: 2006-10, 2011-06 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 12042 April 2014 ICS 67.260 Supersedes EN 12042:2005+A1:2010English Version Food processing machinery - Automatic dough dividers - Safety and
13、 hygiene requirements Machines pour les produits alimentaires - Diviseuses automatiques - Prescriptions relatives la scurit et lhygine Nahrungsmittelmaschinen - Teigteilmaschinen - Sicherheits- und Hygieneanforderungen This European Standard was approved by CEN on 27 December 2013. CEN members are b
14、ound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the
15、 CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centr
16、e has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania
17、, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000
18、 Brussels 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12042:2014 EEN 12042:2014(E)2 Contents Page Foreword 4 Introduction . 5 1 Scope 6 2 Normative references 6 3 Terms, definition and description 8 3.1 Terms and definitio
19、ns . 8 3.2 Description . 8 4 List of significant hazards 10 5 Safety and hygiene requirements and/or protective measures 11 5.1 General 11 5.2 Mechanical hazards . 12 5.3 Electrical hazards 19 5.4 Emergency stop . 20 5.5 Unexpected start-up 20 5.6 Noise reduction 20 5.7 Protection against flour dust
20、 emission . 20 5.8 Hygiene requirements . 20 5.9 Ergonomic principles 21 5.10 Protection against spilling oil . 21 5.11 Pneumatic and hydraulic equipment . 22 6 Verification of safety and hygiene requirements and/or protective measures . 22 7 Information for use 23 7.1 Signals and warning 23 7.2 Ins
21、truction handbook 24 7.3 Marking . 25 Annex A (normative) Noise test code for automatic dividers Grade 2 of accuracy 27 A.1 Installation and mounting conditions 27 A.2 Operating conditions . 27 A.3 Measurements 27 A.4 Emission sound pressure level determination . 27 A.5 Sound power level determinati
22、on 27 A.6 Measurement uncertainties 28 A.7 Information to be recorded . 28 A.8 Information to be reported 28 A.9 Declaration and verification of noise emission values 29 Annex B (normative) Principles of design to ensure the cleanability of automatic dividers 30 B.1 Terms and definitions . 30 B.2 Ma
23、terials of construction 30 B.3 Design . 32 DINEN 12042:2014-07EN 12042:2014 (E) 3 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC 47 Bibliography 48 DIN EN 12042:2014-07 EN 12042:2014 (E) 4 Foreword This document (EN 12042:
24、2014) has been prepared by Technical Committee CEN/TC 153 “Machinery intended for use with foodstuffs and feed”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the late
25、st by October 2014, and conflicting national standards shall be withdrawn at the latest by October 2014. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all s
26、uch patent rights. This document supersedes EN 12042:2005+A1:2010. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive 2006/42/EC. For relationship with EU Directive 2006/
27、42/EC, see informative Annex ZA, which is an integral part of this document. Significant changes The significant changes with respect to the previous edition EN 12042:2005+A1:2010 are listed below: Normative references updated; Clause 4: new presentation in a table; 5.2.2, zone 1: the requirements a
28、re the same when the loading of the machine is manual or automatic; addition of new requirements for pressure sensitive edge (see 5.2.2.2.2), AOPD (see 5.2.2.2.3), cleaning of the hopper (se 5.2.2.2.6) and feeding assistance device inside the hopper (see 5.2.2.2.7); new stopping time 0,35 s; new per
29、formance level d. 5.2.3, zone 2: Table 1 (Dimensions of the guard or tunnel) replaced by a reference to EN ISO 13857; Instruction handbook updated (environmental information). According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound
30、 to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
31、 Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. eDINEN 12042:2014-07EN 12042:2014 (E) 5 Introduction This document is a type C standard as stated in EN ISO 12100:2010. The machinery concerned and the extent to which hazards, hazardous situations and events ar
32、e covered are indicated in the scope of this document. When provisions of this type C standard are different from those that are stated in type A or B standards, the provisions of this type C standard take precedence over the provisions of the other standards, for machines that have been designed an
33、d built according to the provisions of this type C standard. DIN EN 12042:2014-07 EN 12042:2014 (E) 6 1 Scope 1.1 This European Standard applies to the design and manufacture of standalone automatic dough dividers, having a feed hopper, an outlet and a dividing system (see 3.2). These automatic doug
34、h dividers are used separately or in a line in the food industry and shops (pastry-making, bakeries, confectionery, etc.) for dividing dough or pastry into adjustable portions to produce the required weight of dough piece during a dividing process. These machines can be fed by hand or mechanically.
35、This European Standard deals with all significant hazards, hazardous situations and events relevant to the transport, installation, adjustment, operation, cleaning, maintenance, dismantling, disassembling and scrapping of automatic dough dividers, when they are used as intended and under conditions
36、of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). These machines are not intended to be cleaned with pressurized water. 1.2 This European Standard is not applicable to the following: experimental and testing machines, under development by the manufacturer; weighing devic
37、es; pressure dough dividers, without a feed hopper, using knives for the dividing process; lines with separate cutting or forming elements outside the housing; lifting and tilting machines1)or other separate feeding machines; additional hazards generated when the machine is used in a line or mechani
38、cally fed. 1.3 A noise test code is included in Annex A to assist manufacturers to measure noise levels for the purpose of the noise emission declaration. 1.4 This European Standard is not applicable to machines which are manufactured before its publication as EN. 2 Normative references The followin
39、g documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 619:2002+A1:2010
40、, Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads EN 894-4:2010, Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 4: Location and arrangement of displays and control actua
41、tors EN 953:1997+A1:2009, Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards 1)see EN 13288 DINEN 12042:2014-07EN 12042:2014 (E) 7 EN 1037:1995+A1:2008, Safety of machinery - Prevention of unexpected start-up EN 1088:1995+A2:2008, Safety o
42、f machinery - Interlocking devices associated with guards - Principles for design and selection EN 1672-2:2005+A1:2009, Food processing machinery - Basic concepts - Part 2: Hygiene requirements EN 60204-1:2006, Safety of machinery - Electrical equipment of machines - Part 1: General requirements (IE
43、C 60204-1:2005) EN 60529, Degrees of protection provided by enclosures (IP code) (IEC 60529) EN 61310-1, Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, auditory and tactile signals (IEC 61310-1) EN ISO 3743-1:2010, Acoustics - Determination of sound power
44、levels and sound energy levels of noise sources using sound pressure - Engineering methods for small movable sources in reverberant fields - Part 1: Comparison method for a hard-walled test room (ISO 3743-1:2010) EN ISO 3744:2010, Acoustics - Determination of sound power levels and sound energy leve
45、ls of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010) EN ISO 4413, Hydraulic fluid power - General rules and safety requirements for systems and their components (ISO 4413) EN ISO 4414, Pneumatic fluid power - General rul
46、es and safety requirements for systems and their components (ISO 4414) EN ISO 4871:2009, Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871) EN ISO 11201:2010, Acoustics - Noise emitted by machinery and equipment - Determination of emission sound p
47、ressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010) EN ISO 12100:2010, Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:201
48、0) EN ISO 13857:2008, Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008) EN ISO 13849-1:2008, Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2006) EN ISO 13855:2010, Safety of machinery - Positioning of safeguards with respect to the approach speeds of parts of the human body (ISO 13855:2010) EN ISO 13856-1, Safety of machinery - Pressure-sensitive protective d
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1