DIN EN 124-6-2015 Gully tops and manhole tops for vehicular and pedestrian areas - Part 6 Gully tops and manhole tops made of polypropylene (PP) polyethylene (PE) or unplasticized .pdf

1、September 2015 Translation by DIN-Sprachendienst.English price group 18No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).

2、ICS 93.080.30!%E=“2349226www.din.deDDIN EN 124-6Gully tops and manhole tops for vehicular and pedestrian areas Part 6: Gully tops and manhole tops made of polypropylene (PP),polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U);English version EN 124-6:2015,English translation of DIN EN 12

3、4-6:2015-09Aufstze und Abdeckungen fr Verkehrsflchen Teil 6: Aufstze und Abdeckungen aus Polypropylen (PP), Polyethylen (PE) oderweichmacherfreiem Polyvinylchlorid (PVC-U);Englische Fassung EN 124-6:2015,Englische bersetzung von DIN EN 124-6:2015-09Dispositifs de couronnement et de fermeture pour le

4、s zones de circulation utilises par lespitons et les vhicules Partie 6: Dispositifs de couronnement et de fermeture en polypropylne (PP),polythylne (PE) ou polychlorure de vinyle non plastifi (PVC-U);Version anglaise EN 124-6:2015,Traduction anglaise de DIN EN 124-6:2015-09Together with DIN EN 124-1

5、:2015-09, DIN EN 124-2:2015-09, DIN EN 124-3:2015-09, DIN EN 124-4:2015-09and DIN EN 124-5:2015-09 supersedes DIN EN 124:1994-08See start of applicationSupersedes: see belowwww.beuth.deDocument comprises 42 pagesIn case of doubt, the German-language original shall be considered authoritative.08.15DI

6、N EN 124-6:2015-09 2 A comma is used as the decimal marker. Start of application The start of application of this standard is 2015-09-01. It should be noted that, in Germany, CE conformity marking of construction products will be permitted once this standard has been listed in the Official Journal o

7、f the European Union and/or the Bundesanzeiger (German Federal Gazette) and from the date given therein. For further information, users of this standard should refer to the websites of the European Commission or of the relevant building authority. The standard which this document replaces, DIN EN 12

8、4:1994-08, may be used in parallel with this standard during a specified transition period where such has been laid down in the Official Journal of the European Union and/or the Bundesanzeiger (German Federal Gazette). National foreword This document (EN 124-6:2015) has been prepared by Technical Co

9、mmittee CEN/TC 165 “Waste water engineering” (Secretariat: DIN, Germany). The preliminary work was done by Working Group WG 4 “Manhole tops, gully tops, drainage channels and other ancillary components for use outside buildings”. The responsible German body involved in its preparation was the DIN-No

10、rmenausschuss Wasserwesen (DIN Standards Committee Water Practice), Working Committee NA 119-05-01 AA Entwsserungsgegenstnde. When placing manhole tops and gully tops on the German market, the performance of the following essential characteristics shall be stated: reaction to fire; frame bearing are

11、a; load-bearing capacity; permanent set; securing of covers/gratings within the frame; skid resistance; durability of load-bearing capacity against mechanical failure, securing against unintended lifting, skid resistance against loss of grip. Methods used in Germany for securing the cover or grating

12、 within the frame are given in the national standard DIN 1229. DIN EN 124-6:2015-09 3 Amendments This standard differs from DIN EN 124:1994-08 as follows: a) the standard has been split into 6 parts with Part 1 containing general design and performance requirements and Parts 2 to 6 performance requi

13、rements for manhole tops and gully tops made of specific materials; b) test methods for specific materials have been added. Previous editions DIN 1229: 1939-08, 1941-01, 1953-09, 1956x-08, 1964-09 DIN 1213: 1941-10, 1952-08, 1964-09 DIN 1213-1: 1973-05 DIN 1213-2: 1973-05 DIN 1229-1: 1973-05 DIN 122

14、9-2: 1973-05 DIN EN 124: 1986-06, 1994-08 DIN EN 124-6:2015-09 4 This page is intentionally blank EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 124-6 June 2015 ICS 93.080.30 Supersedes EN 124:1994English Version Gully tops and manhole tops for vehicular and pedestrian areas -Part 6: Gully top

15、s and manhole tops made of polypropylene (PP), polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U) Dispositifs de couronnement et de fermeture pour les zones de circulation utilises par les pitons et les vhicules - Partie 6: Dispositifs de couronnement et de fermeture en polypropylne (PP

16、), polythylne (PE) ou polychlorure de vinyle non plastifi (PVC-U) Aufstze und Abdeckungen fr Verkehrsflchen - Teil 6: Aufstze und Abdeckungen aus Polypropylen (PP), Polyethylen (PE) oder weichmacherfreiem Polyvinylchlorid (PVC-U) This European Standard was approved by CEN on 12 March 2015. CEN membe

17、rs are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on applicatio

18、n to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Manageme

19、nt Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, L

20、ithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17

21、, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 124-6:2015 EEN 124-6:2015 (E) 2 Contents Page Foreword 4 1 Scope 5 2 Normative references 5 3 Terms, definitions, symbols and abbreviations .7 3.1 Terms and def

22、initions .7 3.2 Symbols and abbreviations 8 4 Materials .8 4.1 General 8 4.2 Combination of elements made of different materials.9 4.3 UV stability (artificial weathering resistance) .9 4.3.1 General 9 4.3.2 Carbon black requirements for UV resistant PE and PP 10 4.3.3 Titanium dioxide requirements

23、for UV resistant PVC-U . 10 4.4 Metallic fixing 10 5 Requirements 10 5.1 Design and performance requirements 10 5.2 Material specific characteristics for gully tops and manhole tops made of PE, PP, and PVC-U . 11 5.2.1 Reaction to fire 11 5.2.2 Effect of heating 11 5.2.3 Deflection under load . 12 5

24、.2.4 Impact resistance 12 5.2.5 Durability . 12 5.2.6 Dangerous substances 13 6 Testing . 13 6.1 General . 13 6.2 Effect of heating 13 6.3 Deflection under load . 13 6.4 Impact resistance 13 7 Assessment and verification of constancy of performance AVCP . 14 7.1 General . 14 7.2 Type testing . 15 7.

25、2.1 General . 15 7.2.2 Test samples, testing and compliance criteria 15 7.2.3 Test reports . 17 7.2.4 Shared other party results . 17 7.3 Factory production control (FPC) . 18 7.3.1 General . 18 7.3.2 Requirements 18 7.3.3 Product specific requirements 21 7.3.4 Initial inspection of factory and of F

26、PC 22 7.3.5 Continuous surveillance of FPC . 22 7.3.6 Procedure for modifications 23 8 Designation . 23 9 Marking 24 Annex A (normative) Characteristics of glass fibres used for reinforcement of PP polymer 26 DIN EN 124-6:2015-09 EN 124-6:2015 (E) 3 Annex B (normative) Test of deflection under load

27、27 B.1 Test samples 27 B.2 Deflection test load, FD. 27 B.3 Apparatus . 27 B.3.1 Testing machine 27 B.3.2 Test blocks . 27 B.3.3 Deflection measurement device(s) 27 B.4 Procedure . 27 B.4.1 Procedure for testing rectangular and circular covers/gratings 27 B.4.2 Procedure for testing multiple and tri

28、angular covers/gratings 28 B.4.3 Observations and reporting . 28 Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation 29 ZA.1 Scope and relevant characteristics . 29 ZA.2 Procedures for AVCP of gully tops and manhole tops made

29、of PP, PE or PVC-U) 31 ZA.2.1 Systems of AVCP 31 ZA.2.2 Declaration of performance (DoP) . 33 ZA.3 CE marking and labelling 35 Bibliography 38 DIN EN 124-6:2015-09 EN 124-6:2015 (E) 4 Foreword This document (EN 124-6:2015) has been prepared by Technical Committee CEN/TC 165 “Wastewater engineering”,

30、 the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2015 and conflicting national standards shall be withdrawn at the latest by March 2017. Attention

31、 is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the

32、 European Free Trade Association, and supports essential requirements of the Regulation (EU) No. 305/2011. For relationship with EU Regulations, see informative Annex ZA, which is an integral part of this document. Together with EN 124-1:2015, EN 124-2:2015, EN 124-3:2015, EN 124-4:2015 and EN 124-5

33、:2015, the document will supersede EN 124:1994. EN 124, Gully tops and manhole tops for vehicular and pedestrian areas, consists of the following parts: Part 1: Definitions, classification, general principles of design, performance requirements and test methods; Part 2: Gully tops and manhole tops m

34、ade of cast iron; Part 3: Gully tops and manhole tops made of steel or aluminium alloys; Part 4: Gully tops and manhole tops made of steel reinforced concrete; Part 5: Gully tops and manhole tops made of composite materials; Part 6: Gully tops and manhole tops made of polypropylene (PP), polyethylen

35、e (PE) or unplasticized poly(vinyl chloride) (PVC-U). According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finla

36、nd, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 124-6:2015-09 EN 124-6:201

37、5 (E) 5 1 Scope This European Standard applies to manhole tops and gully tops made of Polypropylene (PP), Polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U) by a moulding or extrusion process, with a clear opening up to and including 1 000 mm for covering gullies, manholes and inspectio

38、n chambers for installation within areas subjected to pedestrian and/or vehicular traffic. It is applicable to manhole tops and gully tops for use in areas which can only be used by pedestrians and pedal cyclists (class A 15), and pedestrian areas and comparable areas, car parks or car parking decks

39、 (class B 125). This European Standard gives guidance for combinations of covers/grating made of PP, PE or PVCU with frames according to EN 124-2, EN 124-3, EN 124-4 and EN 124-5. This European Standard is not applicable in isolation but only in combination with EN 124-1. This European Standard is n

40、ot applicable to: rodding point covers according to EN 13598-1; gratings/covers as part of prefabricated drainage channels according to EN 1433; floor and roof gullies in buildings which are specified in EN 1253 (all parts); surface boxes. 2 Normative references The following documents, in whole or

41、in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 124-1:2015, Gully tops and manhole tops f

42、or vehicular and pedestrian areas Part 1: Definitions, classification, general principles of design, performance requirements and test methods EN 124-2:2015, Gully tops and manhole tops for vehicular and pedestrian areas Part 2: Gully tops and manhole tops made of cast iron EN 124-3:2015, Gully tops

43、 and manhole tops for vehicular and pedestrian areas Part 3: Gully tops and manhole tops made of steel or aluminium alloys EN 124-4:2015, Gully tops and manhole tops for vehicular and pedestrian areas Part 4: Gully tops and manhole tops made of steel reinforced concrete EN 124-5:2015, Gully tops and

44、 manhole tops for vehicular and pedestrian areas Part 5: Gully tops and manhole tops made of composite materials EN 513:1999, Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors Determination of the resistance to artificial weathering EN 1401-1, Plastics piping

45、systems for non-pressure underground drainage and sewerage Unplasticized poly(vinyl chloride) (PVC-U) Part 1: Specifications for pipes, fittings and the system DIN EN 124-6:2015-09 EN 124-6:2015 (E) 6 EN 1852-1, Plastics piping systems for non-pressure underground drainage and sewerage Polypropylene

46、 (PP) Part 1: Specifications for pipes, fittings and the system EN 12164:2011, Copper and copper alloys Rod for free machining purposes EN 12200-1, Plastics rainwater piping systems for above ground external use Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings

47、and the system EN 12666-1:2005+A1:2011, Plastics piping systems for non-pressure underground drainage and sewerage Polyethylene (PE) Part 1: Specifications for pipes, fittings and the system EN 13476-2, Plastics piping systems for non-pressure underground drainage and sewerage Structured-wall piping

48、 systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) Part 2: Specifications for pipes and fittings with smooth internal and external surface and the system, Type A EN 13476-3, Plastics piping systems for non-pressure underground drainage and sewerage Struc

49、tured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) Part 3: Specifications for pipes and fittings with smooth internal and profiled external surface and the system, Type B EN 13501-1:2007+A1:2009, Fire classification of construction products and building elements Part 1: Classification using data from reaction to fire tests EN 13598-1, Plastics piping systems for non-pressure underground drainage and sew