DIN EN 12697-24-2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 24 Resistance to fatigue German version EN 12697-24 2012《沥青混合物 热混合沥青的试验方法 第24部分 抗疲劳性 德文版本EN 12697.pdf

1、August 2012 Translation by DIN-Sprachendienst.English price group 21No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS

2、 93.080.20!$w/“1908412www.din.deDDIN EN 12697-24Bituminous mixtures Test methods for hot mix asphalt Part 24: Resistance to fatigue;English version EN 12697-24:2012,English translation of DIN EN 12697-24:2012-08Asphalt Prfverfahren fr Heiasphalt Teil 24: Bestndigkeit gegen Ermdung;Englische Fassung

3、EN 12697-24:2012,Englische bersetzung von DIN EN 12697-24:2012-08Mlanges bitumineux Mthodes dessai pour mlange hydrocarbon chaud Partie 24: Rsistance la fatigue;Version anglaise EN 12697-24:2012,Traduction anglaise de DIN EN 12697-24:2012-08SupersedesDIN EN 12697-24:2007-10www.beuth.deIn case of dou

4、bt, the German-language original shall be considered authoritative.07.12Document comprises 59 pagesDIN EN 12697-24:2012-08 2 A comma is used as the decimal marker. National foreword This standard has been prepared by Technical Committee CEN/TC 227 “Road materials” (Secretariat: DIN, Germany). The re

5、sponsible German body involved in its preparation was the Normenausschuss Bauwesen (Building and Civil Engineering Standards Committee), Working Committee NA 005-10-10 AA Asphalt. Amendments This standard differs from DIN EN 12697-24:2007-10 as follows: a) in Clause 1 “Scope”, it is clarified that t

6、ests using different failure criteria are not comparable; b) the definition of conventional criteria of fatigue for constant force has been deleted, leaving just constant displacement; c) the definitions of the average and standard deviations of the fatigue life of a series of specimens for the two-

7、point and four-point bending tests on prismatic specimens have been deleted; d) the symbols for the frequency of the sinusoidal load applications and angular speed have been modified; e) the requirements on age and drying of specimens have been moved from the annexes to the main text; f) the limits

8、of interpolation have been defined; g) an alternative criterion is given in a note; h) the requirement for checking (rather than calibration of) the test equipment has been moved from the annexes to the main text; i) a requirement has been added for the test report to include information on the test

9、 method, testing equipment, checking of the testing equipment and the age of the specimen at the time of testing; j) the tolerance for the displacement of the trapezoidal specimen has been extended; k) the measurements in the three-point bending test on prismatic specimens now start after fewer cycl

10、es; l) a note has been added on rotating the specimen in the four-point bending test on prismatic specimens; m) the optional requirement for choosing a frequency spectrum of initial complex (stiffness) moduli has been removed from the four-point bending test on prismatic specimens; n) the principle,

11、 equipment, procedure and calculations of the indirect tensile test on cylindrical specimens have been revised. Previous editions DIN EN 12697-24: 2004-09, 2007-10 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 12697-24 May 2012 ICS 93.080.20 Supersedes EN 12697-24:2004+A1:2007English Version

12、Bituminous mixtures - Test methods for hot mix asphalt - Part 24: Resistance to fatigue Mlanges bitumineux - Mthodes dessai pour mlange hydrocarbon chaud - Partie 24: Rsistance la fatigueAsphalt - Prfverfahren fr Heiasphalt - Teil 24: Bestndigkeit gegen Ermdung This European Standard was approved by

13、 CEN on 23 March 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standar

14、ds may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and noti

15、fied to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuani

16、a, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2

17、012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12697-24:2012: EEN 12697-24:2012 (E) 2 Contents PageForeword 41 Scope 82 Normative references 83 Terms, definitions, symbols and abbreviations .83.1 General 93.2 Two-point bending

18、 test on trapezoidal specimens 93.3 Two-point bending test on prismatic shaped specimens 103.4 Three-point bending test on prismatic shaped specimens 123.5 Four-point bending test on prismatic shaped specimens . 133.6 Symbols for indirect tensile test on cylindrical shaped specimens . 184 Sample pre

19、paration 194.1 Age of the specimens . 194.2 Drying of the specimen 194.3 Dimensions and bulk density of the specimens . 195 Failure 196 Calculations . 197 Summary of the procedures 197.1 Two-point bending test on trapezoidal specimens . 197.2 Two-point bending test on prismatic shaped specimens 197.

20、3 Three-point bending test on prismatic shaped specimens 207.4 Four-point bending test on prismatic shaped specimens . 207.5 Indirect tensile test on cylindrical shaped specimens . 208 Checking of the testing equipment . 209 Test report . 21Annex A (normative) Two-point bending test on trapezoidal s

21、haped specimens . 22A.1 Principle . 22A.2 Equipment . 23A.3 Specimen preparation 23A.4 Procedure 26A.5 Calculation and expression of results 27A.6 Test report . 28A.7 Precision 28Annex B (normative) Two-point bending test on prismatic shaped specimens 30B.1 Principle . 30B.2 Equipment . 30B.3 Specim

22、en preparation 31B.4 Procedure 31B.5 Calculation and expression of results 32B.6 Test report . 34B.7 Precision 34Annex C (normative) Three-point bending test on prismatic shaped specimens 35C.1 Principle . 35C.2 Equipment . 35C.3 Specimen preparation 36C.4 Procedure 36DIN EN 12697-24:2012-08 EN 1269

23、7-24:2012 (E) 3 PageC.5 Calculation and expression of results 37C.6 Test report 40C.7 Precision. 41Annex D (normative) Four-point bending test on prismatic shaped specimens 42D.1 Principle 42D.2 Equipment 44D.3 Specimen preparation . 45D.4 Procedure . 46D.5 Calculation and expression of results 48D.

24、6 Test report 48D.7 Precision. 48Annex E (normative) Indirect tensile test on cylindrical shaped specimens 49E.1 Principle 49E.2 Equipment 49E.3 Specimen preparation . 52E.4 Procedure . 53E.5 Calculation and reporting of results 53E.6 Test report 56E.7 Precision. 56Bibliography 57DIN EN 12697-24:201

25、2-08 EN 12697-24:2012 (E) 4 Foreword This document (EN 12697-24:2012) has been prepared by Technical Committee CEN/TC 227 “Road materials”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or

26、by endorsement, at the latest by November 2012, and conflicting national standards shall be withdrawn at the latest by November 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible

27、 for identifying any or all such patent rights. This document supersedes EN 12697-24:2004+A1:2007. The main changes with respect to the previous edition are as follows: clarification in the scope that tests using different failure criteria are not comparable; definition of conventional criteria of f

28、atigue for constant force deleted, leaving just constant displacement; definitions of the average and standard deviation of the fatigue life of a series of specimens for the two-point and four-point bending tests on prismatic specimens removed; symbols for the frequency of the sinusoidal load applic

29、ations and angular speed revised; requirements on age and drying of specimens added in the main text and removed from the individual annexes; limits on interpolation defined; alternative criterion given in a note; requirement for checking (rather than calibration of) the test equipment added in the

30、main text and removed from the individual annexes; requirement added for the test report to include information on the chosen test method, the used testing equipment, results of the last check on calibration of the testing equipment and the age of the specimen at the time of testing; the tolerance f

31、or the displacement of the trapezoidal specimen widened; measurements on the three-point bending test on prismatic specimens started after fewer cycles; note added on rotating the specimen in four-point bending test on prismatic specimens; the optional requirement for choosing frequency spectrum of

32、initial complex (stiffness) moduli removed from the four-point bending test on prismatic specimens; the principle, equipment, procedure and calculations of the indirect tensile test on cylindrical specimens revised. This document is one of a series of standards for bituminous mixtures which includes

33、 the following: DIN EN 12697-24:2012-08 EN 12697-24:2012 (E) 5 EN 12697-1, Bituminous mixtures Test methods for hot mix asphalt Part 1: Soluble binder content EN 12697-2, Bituminous mixtures Test methods for hot mix asphalt Part 2: Determination of particle size distribution EN 12697-3, Bituminous m

34、ixtures Test methods for hot mix asphalt Part 3: Binder recovery: Rotary evaporator EN 12697-4, Bituminous mixtures Test methods for hot mix asphalt Part 4: Binder recovery: Fractionating column EN 12697-5, Bituminous mixtures Test methods for hot mix asphalt Part 5: Determination of the maximum den

35、sity EN 12697-6, Bituminous mixtures Test methods for hot mix asphalt Part 6: Determination of bulk density of bituminous specimens EN 12697-7, Bituminous mixtures Test methods for hot mix asphalt Part 7: Determination of bulk density of bituminous specimens by gamma rays EN 12697-8, Bituminous mixt

36、ures Test methods for hot mix asphalt Part 8: Determination of void characteristics of bituminous specimens EN 12697-10, Bituminous mixtures Test methods for hot mix asphalt Part 10: Compactibility EN 12697-11, Bituminous mixtures Test methods for hot mix asphalt Part 11: Determination of the affini

37、ty between aggregate and bitumen EN 12697-12, Bituminous mixtures Test methods for hot mix asphalt Part 12: Determination of the water sensitivity of bituminous specimens EN 12697-13, Bituminous mixtures Test methods for hot mix asphalt Part 13: Temperature measurement EN 12697-14, Bituminous mixtur

38、es Test methods for hot mix asphalt Part 14: Water content EN 12697-15, Bituminous mixtures Test methods for hot mix asphalt Part 15: Determination of the segregation sensitivity EN 12697-16, Bituminous mixtures Test methods for hot mix asphalt Part 16: Abrasion by studded tyres EN 12697-17, Bitumin

39、ous mixtures Test methods for hot mix asphalt Part 17: Partial loss of porous asphalt specimen EN 12697-18, Bituminous mixtures Test methods for hot mix asphalt Part 18: Binder drainage EN 12697-19, Bituminous mixtures Test methods for hot mix asphalt Part 19: Permeability of specimen EN 12697-20, B

40、ituminous mixtures Test methods for hot mix asphalt Part 20: Indentation using cube or Marshall specimens EN 12697-21, Bituminous mixtures Test methods for hot mix asphalt Part 21: Indentation using plate specimens EN 12697-22, Bituminous mixtures Test methods for hot mix asphalt Part 22: Wheel trac

41、king EN 12697-23, Bituminous mixtures Test methods for hot mix asphalt Part 23: Determination of the indirect tensile strength of bituminous specimens DIN EN 12697-24:2012-08 EN 12697-24:2012 (E) 6 EN 12697-24, Bituminous mixtures Test methods for hot mix asphalt Part 24: Resistance to fatigue EN 12

42、697-25, Bituminous mixtures Test methods for hot mix asphalt Part 25: Cyclic compression test EN 12697-26, Bituminous mixtures Test methods for hot mix asphalt Part 26: Stiffness EN 12697-27, Bituminous mixtures Test methods for hot mix asphalt Part 27: Sampling EN 12697-28, Bituminous mixtures Test

43、 methods for hot mix asphalt Part 28: Preparation of samples for determining binder content, water content and grading EN 12697-29, Bituminous mixtures Test methods for hot mix asphalt Part 29: Determination of the dimensions of a bituminous specimen EN 12697-30, Bituminous mixtures Test methods for

44、 hot mix asphalt Part 30: Specimen preparation by impact compactor EN 12697-31, Bituminous mixtures Test methods for hot mix asphalt Part 31: Specimen preparation by gyratory compactor EN 12697-32, Bituminous mixtures Test methods for hot mix asphalt Part 32: Laboratory compaction of bituminous mixt

45、ures by vibratory compactor EN 12697-33, Bituminous mixtures Test methods for hot mix asphalt Part 33: Specimen prepared by roller compactor EN 12697-34, Bituminous mixtures Test methods for hot mix asphalt Part 34: Marshall test EN 12697-35, Bituminous mixtures Test methods for hot mix asphalt Part

46、 35: Laboratory mixing EN 12697-36, Bituminous mixtures Test methods for hot mix asphalt Part 36: Determination of the thickness of a bituminous pavement EN 12697-37, Bituminous mixtures Test methods for hot mix asphalt Part 37: Hot sand test for the adhesivity of binder on precoated chippings for H

47、RA EN 12697-38, Bituminous mixtures Test methods for hot mix asphalt Part 38: Common equipment and calibration EN 12697-39, Bituminous mixtures Test methods for hot mix asphalt Part 39: Binder content by ignition EN 12697-40, Bituminous mixtures Test methods for hot mix asphalt Part 40: In situ drai

48、nability EN 12697-41, Bituminous mixtures Test methods for hot mix asphalt Part 41: Resistance to de-icing fluids EN 12697-42, Bituminous mixtures Test methods for hot mix asphalt Part 42: Amount of coarse foreign matters in reclaimed asphalt EN 12697-43, Bituminous mixtures Test methods for hot mix asphalt Part 43: Resistance to fuel EN 12697-44, Bituminous mixtures Test methods for hot mix asphalt Part 44: Crack propagation by semi-circular bending test EN 12697-45, Bituminous mixtures Test methods for hot mix asphalt