DIN ISO 3415-2011 Textile floor coverings - Determination of thickness loss after brief moderate static loading (ISO 3415 1986)《纺织铺地物 短时间中等静负载后厚度减少的测定(ISO 3415-1986)》.pdf

1、April 2011 Translation by DIN-Sprachendienst.English price group 5No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 5

2、9.080.60!$nOU“1754450www.din.deDDIN ISO 3415Textile floor coverings Determination of thickness loss after brief, moderate static loading(ISO 3415:1986)English translation of DIN ISO 3415:2011-04Textile Bodenbelge Bestimmung des Dickenverlustes nach kurzer, miger statischer Belastung(ISO 3415:1986)En

3、glische bersetzung von DIN ISO 3415:2011-04Revtements de sol textiles Dtermination de la perte dpaisseur aprs application, de courte dure, dune chargestatique modre (ISO 3415:1986)Traduction anglaise de DIN ISO 3415:2011-04SupersedesDIN 54316:1983-10www.beuth.deDocument comprises pagesIn case of dou

4、bt, the German-language original shall be considered authoritative.503.11 DIN ISO 3415:2011-04 A comma is used as the decimal marker. Contents Page National foreword 3 National Annex NA (informative) Bibliography 3 1 Scope . 4 2 Normative references . 4 3 Principle. 4 4 Apparatus 4 5 Checking of the

5、 thickness gauge 4 6 Atmosphere for conditioning and testing 4 7 Test specimens. 4 8 Procedure. 5 9 5Expression of results10 Test report . 5 2 DIN ISO 3415:2011-04 National foreword This standard has been prepared by Technical Committee ISO/TC 38 “Textiles”. In the meantime, ISO/TC 219 “Floor coveri

6、ngs” is responsible for the standardization of textile, resilient and laminate floor coverings. The responsible German body involved in its preparation was the Normenausschuss Kunststoffe (Plastics Standards Committee), Working Committee NA 054-04-09 AA Prfung und Verwendungsbereichseinstufung von t

7、extilen Bodenbelgen. The content of ISO 3415:1986 has been adopted without any changes to its content but with minor formal modifications. This document contains phrasings and formats that are appropriate to the structure and character of an International Standard but which, in terms of detail, do n

8、ot necessarily meet the current rules of presentation for German Standards. Wherever possible, German technical terms were used in the German translation. The DIN Standard corresponding to the International Standard referred to in this document is as follows: ISO 139 DIN EN ISO 139 Amendments This s

9、tandard differs from DIN 54316:1983-10 as follows: a) the content of ISO 3415:1986 has been adopted in its entirety; b) the thickness after loading is to be measured after recovery periods of 15 min, 30 min and 60 min; c) test results according to this standard are comparable to those received on th

10、e basis of DIN 54316:1983-10. Previous editions DIN 54316: 1969-09, 1983-10 National Annex NA (informative) Bibliography DIN EN ISO 139, Textiles Standard atmospheres for conditioning and testing 3 DIN ISO 3415:2011-04 Textile floor coverings Determination of thickness loss after brief, moderate sta

11、tic loading 48 Procedure 9.2 Using the values determined as described in 9.1, calculate the following values for all specimens : 8.1 General a) the thickness loss as the differente between the initial thi ckness and the thickness under the p Iressure of 220 kPa; Conduct the test in the Standard atmo

12、sphere for testing textiles. Make all determinations of thickness to the nearest 0,l mm. b) the thickness loss after recovery as the differentes be- tween the initial thickness and the three values of thickness after recovery for 15, 30 and 60 min. In Order to ensure that the specimen is held flat,

13、place a guard ring centrally on the specimen so that its centre coincides with that of the presser foot. Keep the guard ring in the same posi- tion throughout the entire test procedure. The ability of recovery of a textile floor covering tan be indicated by a diagram showing the remaining compressio

14、n after the removal of pressure at the various times of recovery. 8.2 Measurement of initial thickness 9.3 Example Determine the initial thickness in the centre of the specimen under pressure before the application of the specified using the method specified in ISO 1765. Initial thickness under Stan

15、dard pressure the 10,3 mm 83 . Measurement of thickness under pressure Thickness under the pressure of 220 kPa 5,6 mm Immediately after the determination of the initial thickness (see 8.2) apply a pressure of 220 kPa to the specimen without shock. Ensure that the specimen is neither touched nor move

16、d during the procedure. After exerting this pressure for a period of 2 h, measure the thickness under that pressure. Then remove the pressure on the specimen without touching or removing the specimen. Thickness after 60 min recovery 9,l mm Thickness loss 10,3 - 5,6 = 4,7 mm Thickness loss after reco

17、very 10,3 - 9,l = 1,2 mm 10 Test report 84 . Measurement of thickness after recovery The test report shall include the following particulars : Measure the thickness of the specimen after recovery periods of 15 min, 30 min and 60 min, using the method specified in ISO 1765. a) that the procedure was

18、conducted in accordance with this International Standard, and details of any operations not included, or optional; b) the number of specimens tested; 9 Expression of results c) arithmetic means specimens tested; of the initial thickness of the 9.1 Calculate the following values for each specimen tes

19、ted, and also the arithmetic means of the measurements on all specimens tested, to the nearest 0,l mm : d) arithmetic means specimens tested; of the thickness under pressure of the a) initial thickness under the Standard pressure; e) arithmetic means of the thickness at various times of recovery of the specimens tested (if required, the ton- fidence interval should be recorded); b) thickness under the pressure of 220 kPa; c) thickness after recovery for 15 min for 30 min for 60 min fl thickness Ioss; 9) thickness loss after recovery. DIN ISO 3415:2011-04 5