DLA A-A-50117 B-2000 CRAMPONS HINGED《铰链连接的金属钩》.pdf

1、INCH-POUNDA-A-50117BOctober 10, 2000SUPERSEDINGA-A-50117AFebruary 21, 1990COMMERCIAL ITEM DESCRIPTIONCRAMPONS, HINGEDThe General Services Administration has authorized the use of this Commercial ItemDescription for all Federal agencies.1. SCOPE. This commercial item description covers the requiremen

2、ts for the cramponsto be used when walking on ice or ascending and descending steep ice faces to preventslipping.2. CLASSIFICATION. The crampons shall be of one type and size.3. SALIENT CHARACTERISTICS.3.1 Design and construction. The crampons shall be heat-treated 4130 steel. Thecrampon shall have

3、12 spikes and an adjustable center hinge to adjust the length of thecrampon (see figure I). All nuts necessary for assembly shall be furnished with a nylonlocking insert. The crampon shall also be fully adjustable in sizes and widths and becompatible with insulated, cold weather boots (MIL-B-41816),

4、 ski-mountain boots (MIL-B-43739), and other various commercial mountaineering boots with the aid of a big footcenter piece when necessary. The crampon shall have six attachment points for l/2-inchwide strap binding. The crampons shall be furnished with all tools, instructions, andhardware necessary

5、 to assemble and adjust the crampons. The crampons shall be blackor gold in color with an epoxy coating. The crampons shall be furnished in pairs.Maximum weight per pair, including tools, shall be 750 grams. The manufacturersidentification symbol shall be stamped on the crampon.4. REGULATORY REQUIRE

6、MENTS. The offeror/contractor is encouraged to userecovered materials to the maximum extent practicable, in accordance with paragraph23.403 of the Federal Acquisition Regulation (FAR).Beneficial comments, recommendations, additions, deletions, clarifications, etc. and any data whichmay improve this

7、document should be sent to: Defense Personnel Support Center, Clothing andTextiles Directorate, Attn: DSCP-COET, 700 Robbins Ave, Philadelphia, PA 19111-5096.AMSC N/A FSC 8465Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-50117B25. QUALITY ASSUR

8、ANCE PROVISIONS.5.1 Product conformance. The products provided shall meet the salient characteristics ofthis commercial item description, conform to the producers own drawings,specifications, standards, and quality assurance practices, and to be the same productoffered for sale in the commercial mar

9、ket. The government reserves the right to requireproof of such conformance.5.2 Visual examination. Each item shall be examined for the defects listed below.Defects. Finish not smooth and adherent; not free of burrs, forging laps, rough spots,sharp edges (except for crampon spikes which shall come to

10、 a point), slivers, flat areas orprojections; any component missing or not specified type; any component fractured, split,dented, bowed, malformed, damaged or loose; markings in wrong location, incomplete,illegible, or not as specified.5.3 Dimensional examination. The crampons shall be examined with

11、out damaging ordisassembling the item. The lot size shall be expressed in units of crampons. The sampleunit shall be one crampons.5.4 Acceptance criteria. Acceptance criteria shall be as specified in the contract orpurchase order.6. PACKAGING.6.1 Preservation, packing, and marking. The preservation,

12、 packing, and marking shall beas specified in the contract or order.7. NOTES7.1 Source of Government documents. Copies of military and Federal documents areavailable from:Standardization Documents Order DeskBldg. 4D700 Robbins AvenuePhiladelphia, PA 19111-50947.2 Ordering data. Acquisition documents

13、 should specify the following:a. Title, number, and date of this document.b. Type required (see paragraph 2)7.3 Sources of products known to meet this CID. Below is only a sampling of knownsuppliers and not an all-inclusive list. Similar items may be considered acceptable.Provided by IHSNot for Resa

14、leNo reproduction or networking permitted without license from IHS-,-,-A-A-50117B31. Adventure Tech, Inc4124 N. Burns RoadSpokane, WA 992162. Climb High1861 Shelburne RoadShelburne, Vermont 054823. REI (Recreational Equipment Incorporated)Sumner, WA 98352MILITARY INTERESTS: CIVIL AGENCY COORDINATING ACTIVITYGSA - FSSCustodiansArmy GL PREPARING ACTIVITY:Air Force 11 DLA-CTNavy - NUReview Activities Project NumberNavy MC 8465-0329Crampons, HingedFigure IProvided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-