DLA A-A-55273-1995 RETAINER EYEWEAR《眼镜固定装置》.pdf

1、I INCH-POUND I A-A-5 5 2 7 3 April 18, 1995 COMMERCIAL ITEM DESCRIPTION RETAINER, EYEWEAR The General Services Administration has authorized the use of this commercial item description. 1. SCOPE. This commercial item description covers eyewear retainers intended to be used by all soldiers wearing pr

2、escription or non-prescription eyewear during combat, athletic, and garrison activities. 2. SALIENT CHARACTERISTICS 2.1 Description. The eyewear retainer shall consist of a soft, woven, cloth material having tubular ends that slide over the temples of standard eyewear. There shall be no rigid slides

3、 or buckles. Fit and retention shall be accomplished by sliding the ends over the length of the temples. 2.2 Lensth. The length of the eyewear retainer shall be greater than 15 inches but no longer than 19 inches. 2.3 Color. The color of the eyewear retainer shall be olive green or black. Beneficial

4、 comments, recommendations, additions, deletions, clarifications, etc. and any data which may improve this document should be sent to: Defense Personnel Support Center, Clothing and Textiles Directorate, Attn: DPSC-FQSE, 2800 South 20th Street, Philadelphia, PA 19145-5099. AMSC N/A FSC 8465 DISTRIBU

5、TION STATEMENT A. Approved for public release; distribution is unlimited. Licensed by Information Handling Services W 9999974 01166967 887 I A-A-552 7 3 2.4 Identification markinas. The manufacturers name shall be permanently marked on each headband in characters 1/8 inch high minimum. show smearing

6、, bleeding, or offsetting. The markings shall be clearly legible and shall not 2.5 Instructions. A removable instruction card or tag shall be attached. for attaching and adjusting the eyewear retainer. In addition, a bar-coding element as in 2.5.1 shall be included. The instructions shall indicate t

7、he proper procedure 2.5.1 Bar code. The bar coding element shall be a 13 digit national stock number (NSN). to high code density and shall be located so that it is completely visible on the item when it is folded and/or packaged as specified and so that it causes no damage to the item. The bar code

8、type shall be a medium 3. REGULATORY REQUIREMENTS. The offeror/contractor is encouraged to use recovered materials to the maximum extent practicable, in accordance with paragraph 23.403 of the Federal Acquisition Regulation (FAR). 4. QUALITY ASSURANCE PROVISIONS 4.1 Certification. The contractor sha

9、ll certify and maintain substantiating evidence that the product offered meets the salient characteristics of this commercial item description; conforms to the producers own drawings, specifications, standards, and quality assurance practices; and is the same product offered for sale in the commerci

10、al marketplace. The Government reserves the right to require proof of such conformance prior to the first delivery and thereafter as may be otherwise provided for under the provisions of the contract. 4.2 Market acceptability criteria. The item offered, or a generic equivalent, must have been sold t

11、o the commercial market or to the Government for at least two years. 4.3 Warranty. The item offered shall include the standard warranty given to the commercial market beginning with the date of delivery of the individual items. 4.4 Visual examination. Each eyewear retainer shall be examined for the

12、defects listed below. 4.4.1 Defects. Any hole, cut, tear, pull, or fray; color not as specified; any part shaded; any spot or stain; ends of stitching not backstitched or overstitched; thread ends not removed; any material defects or poor workmanship; label missing, incorrect, or illegible; measurem

13、ent of item not as specified; bar code omitted or not readable by scanner; human-readable interpretation (MI) omitted or illegible; bar code not visible on folded, packaged item; any items not packaged in accordance with the contract or purchase order. 2 Licensed by Information Handling Services,I 9

14、999974 OLbbbB 713 A-A-5 52 7 3 5. PACKAGING 5.1 Preservation, Dackins. and markinq. The preservation, packing, and marking shall be as specified in the contract or order. 6. NOTES 6.1 Source of Government documents. Copies of military and Federal documents are available from: Standardization Documen

15、ts Order Desk Bldg. 4D 700 Robbins Avenue Philadelphia, PA 19111-5094 6.2 Possible sources of sumlv. Competition is not limited to the manufacturers or styles listed below: Retainer, eyewear, model tlDiplomattt Retainer, eyewear, model llJercstl Chums Ltd. P.O. Box 950 120 South Main Street Hurrican

16、e, UT 84737 Retainer, eyewear, model bR1005 ttStreamlineslt Quest Industries, Inc. 333 South State Street, Suite 165 Lake Oswego, OR 97034 Retainer, eyewear, model ltCroakieslt Ultimate Marketing, Inc. 1072 Laskin Road Suite 105 Virginia Beach, VA 23451 Retainer, eyewear, model #AMs-7 tlAmigo Sport“

17、 Pro-Optics, nc. 317 Woodwork Lane Palentine, IL 60067 Retainer, eyewear Peepers Keepers, Inc. P.O. Box 1296 Shingle Springs, CA 95682 6.3 Acceptance criteria. Acceptance specified in the contract or purchase criteria shall be as order. 3 Licensed by Information Handling ServicesMILITARY INTERESTS:

18、Custodians Army - GL Navy - Nu Air Force - 99 Review Activities Army - MD Navy - AS Navy - MC Air Force - 11, 45, 82 Coast Guard - CGCT W 74 OLbbb4 078 W A-A-552 7 3 CIVIL AGENCY COORDINATING ACTIVITY : GSA - FSS PREPARING ACTIVITY: DLA - CT Project 8465-0185 4 Licensed by Information Handling Services