DLA A-A-55454-1996 TASK LIGHT UNDER-CABINET FLUORESCENT HIGH EFFICIENCY《高效荧光箱底作业灯》.pdf

1、A-A-55454 9999979 O16953b 251 M t A- A- 5 5 4 5 4 January 22,1996 COMMERCIAL ITEM DESCRIPTION Task Light, Under-cabinet, Fluorescent, High Efficiency The General Services Administration has authorized the use of this commercial item description for all federal agencies. 1, SCOPE. This document descr

2、ibes an energy efficient fluorescent lighting fixture (hereafter referred to as the “fixture”) suitable for mounting on the under-side of a cabinet to provide 50 to 100 foot-candles intensity on the work surface 15 to 18 inches below. 2. SALIENT CHARACTERISTICS. 2.1. Design a nd construct ion. The c

3、onstruction and design of the fixture shall conform to the following: a. electrical supply cord; Hard Usage, 3 conductor, 9 foot length, b. lamp; one T8,3000K, 265 mA, tri-phosphor, c. ballast; class “P”, electronic, energy saving, thermally protected with a sound rating of “A”, producing a minimum

4、of 30,000 Hz and C.B.M. approved, d. reflectors; minimum 95% reflective, or .O05 Aluminum, semi difuse, e. housing or chassis; die-formed industry code gauge cold rolled steel, f. exterior finish; .O02 inch thickness of dry powder coat or semi-gloss off-white baked enamel, g. interior finish; (if wh

5、ite only) 85% reflectivity, semi-gloss baked enamel or equivalent anti-corrosion protection, , i. lens; clear acrylic prismatic diffuser producing a minimum luminance contrast of 74% any where on the work surface when measured with a Bruel portable light for use with office furniture: I.B.E.W. liste

6、d by Undenirriters Laboratories or C.S.A. 3. Repulatory req uirements. The offeror/contractor is encouraged to use recovered materials in accordance with Public Law 94-580 to the maximum extent practicable. AMSC NIA DISTRIBI JTiON S TATEMEN T A. Approved for public release; distribution is unlimited

7、. FSC 62 1 O Beneficial comments, recommendations, additions, deletions, clarifications, etc. and any data which may improve this document, should be sent to: Commander, Defense Supply Center Richmond ATIN.: DSCWJFNCA, Richmond, VA 23297-5000. Licensed by Information Handling ServicesA-A-55454 4. QU

8、ALITY ASSURANCE 3.1 Recycled Ma terial. The offeror/contractor is encouraged to use recovered materiais to the maximum extent practicable, in accordance with paragraph 23.403 of the Federal Acquisition Regulation (FAR). Recycled and reclaimed materials shall consist of previously used material that

9、has been reprocessed to become a source of new raw materials. Under no circumstances shall the contractor submit reconditioned or rebuilt components for government acceptance; as a part of the equipment described herein. 4.1 Contractor Certificat ion. The contractor shall certiQ and maintain substan

10、tiating evidence that the product offered meets the salient characteristics of this Commercial Item Description, and that the product conforms to the producers own drawings, specifications, standards, and quality assurance practices, and is the same as the product offered for sale in the commercial

11、marketplace. When specific quality assurance provisions are specified for any commercial characteristic the contractor shall furnish data resulting from inspection(s) conducted in accordance with the specific quality assurance provisions. The government reserves the right to require proof of such co

12、nformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract. 5. PACKAGING 5.1 Pack-. Preservation, packing, and palletization shall be as specified in the contract or order. 5.2 m. In addition to any special marking required by the contract

13、or purchase order, unit packs, shipping containers and unitized pallet loads shall be marked in accordance with MiGSTD-129. 6. NOTES 6.1 . Title, number, and date of this document 6.2 Metr IC Droduct . . Products manufactured to metric dimensions shall be considered on an equal basis with those manu

14、factured using inch-pound units, provided they fall within specified tolerances using conversion tables contained in the latest revision of Federal Standard Number 376, and all other requirements of this Commercial Item Description are met. If a product is manufactured to metric dimensions and those

15、 dimensions exceed the tolerances specified in the inch-pound units, a request should be made to the contracting officer to determine if the product is acceptable. 2of3 Licensed by Information Handling ServicesA-A-55454 - 9999974 OLb9538 024 A-A-55454 6.3 Source J, ist. Manufacturers known to meet t

16、his CID requirement: Garcy Systems Lighting Products 209 Kirby Road Portland, TN 37148 Lightolier 63 1 Airport Road Fall River, MA 02720 Copies of referenced government documents are available from: b h 6.3.1 Referenced documents. Standardization Documents Order Desk, 700 Robbins Avenue, Building 4,

17、 Section Dy Philadelphia, PA 191 11-5094 Telephone No. 2 15-697-5503 Fax No. 2 15-697-2978 Copies of referenced commercial documents are available from: Underwriters Laboratories Inc. 333 Pfingston Road, Northbrook, IL 60062-2096 MILITARY “ERXSTS: Custodians Air Force - 99 Review activities Navy - SH Army - ME CIVIL AGENCY COORDINATING ACTIVITY: GSA - FSS PREPARING ACTIVITY: DLA - GS (Project 62 1 O- 1063) 1 Licensed by Information Handling Services