DLA A-A-55815-1995 CABLE ASSEMBLY (TYPE II) ELECTRONIC TEST EQUIPMENT (2 POLES 3 WIRES GROUNDED 125 VOLTS 10 AMPERES 50 OR 60 HERTZ) GROUNDING PLUG CONNECTOR AND STRAIGHT MOLDED TY.pdf

1、- A-A-55815 m 9999974 0171470 LO9 m METRIC A-A-558 15 - SUPERSEDING MIL-C-28777/8A 3 April 1978 COMMERCIAL ITEM DESCRIPTION CABLE ASSEMBLY, (TYPE II), ELECTRONIC TEST EQUIPMENT, (2 POLES, 3 WIRES, GROUNDED, 125 VOLTS, 10 AMPERES, 50 OR 60 HERTZ), GROUNDING PLUG CONNECTOR, AND STRAIGHT MOLDED TYPE II

2、 EQUIPMENT CONNECTOR The General Services Administration has authorized the use of this commercial item description as a replacement for MIL-S-2877718 for all federal agencies. 1. SCOPE. 1.1 Scope. This commercial item description covers the requirements for a cable assembly, (type II), electronic t

3、est equipment, (2 poles, 3 wires, grounded, 125 volts, 10 amperes, 50 or 60 Hertz), grounding plug connector, also commonly known as a 125 volt power supply cord? 1.2 Intended use. This cable assembly is to be used with modified Commercial off-the-shelf (COTS) equipment. 2. SALIENT CHARACTERISTICS.

4、2.1 Reauirements . The cable assembly shall provide for the transmission of 125 volt, 10 ampere, 50 or 60 hertz ac power and shall be configured in accordance with figure 1. The cable shall meet the requirements of UL 62 for a class 43, AWG 18, SVT cable rated at 90“ (194“F), Unless otherwise specif

5、ied (see 6.1), the cable shall be unshielded. The cable jacket shall be marked in accordance with section 71 of UL 62. The plug connector shall be molded to the jacket in accordance with section 56 of UL 817 and shall conform to NEMA WD-1 and figure 5-15 of NEMA WD-6. The equipment connector shall b

6、e a straight molded connector conforming to Standard Sheet E, Amendment 1, of ANSI/IEC320-2- 2. Unless otherwise specified (see 6.1), the length of the cord shall not be less than 2,360 mm (93 in.) and not greater than 3 ,O00 mm (1 18 in.). Beneficial comments, recommendations, additions, deletions,

7、 clarifications, etc. and any other data which may improve this document should be sent to: Defense Supply Center Richmond, ATTN: DSCR-VCA, 8000 Jefferson Davis Highway, Richmond, VA 23297-5610. AMSC N/A FSC 6150 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Provi

8、ded by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-55 8 15 FIGURE I. Cable assembly 3. REGULATORY REQUIREMENTS. 3.1 Recycled. reco vered or en vironmentally pre ferable materials, Recycled, recovered or environmentally preferable materiais should be used

9、 to the maximum extent possible, provided that the material meets or exceeds the operational and maintenance requirements and promotes economically advantageous life cycle costs. 3.2 Environmental protect ion. The cable assembly shall meet all applicable Environmental Protection Agency Code of Regul

10、ation (CFR) in effect on the date of the contract. These regulations apply to the emission of material hazardous to the environment or the operators health and shall be met during manufacturing, service, transportation, storage and operation. 4. QUALITY ASSURANCE PROVISIONS. 4.1 Product certw . The

11、product shall have been certified by a nationally recognized testing laboratory for compliance with the requirements of UL 817. 4.2 Contractor certificat ion. The contractor shall cert and maintain substantiating evidence that the product offered meets the salient characteristics of this commercial

12、item description, and that the product conforms to the producers own drawings, specifications, and quality assurance practices, and is the same product offered for sale in the commercial marketplace. The government reserves the right to require proof of such conformance prior to first delivery, and

13、thereafter, as may be otherwise provided under the provisions of the contract. 4.3 Market acceptab ilitv. - The item offered must have been sold to the government or commercial market. 5. PACKAGING. Unless otherwise specified (see 6.1), preservation, packing and marking shali be as specified in the

14、contract or order. 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- A-A-55815 9999974 OL7L472 TAL H 6. NOTES. A-A-55815 6.1 Ordemgdm . Acquisition documents must speci the following: a. Title, number, and date of this comme;cial item description. b

15、. Quantity required. c. Shielded cable, if required (see 2.1). d. Cable length, if different (see 2.1). e. Packaging requirements, if different (see 5). 6.2 Part ide-ber (PIN) . The following part identification numbering procedure is for government purposes and does not constitute a requirement for

16、 the contractor. CID AA55815 shall replace the previous part number M28777/8-1 6.3 Source of documem. 6.3.1 Copies of Military and Federal documents may be obtained from the Superintendent of Documents, U.S. Government Printing Office, Washington, D.C. 20402. 6.3.2 Copies of industry documents/stand

17、ards referenced in this Commercial item description may be obtained from the following addresses: 6.3.2.1 National Electrical Manufacturers Association (NEMA) 2101 L Street, Washington, D.C. 20037. 6.3.2.2 Underwriters Laboratories Inc. (VL) 1285 Walt Whitman Road, Melville, NY 11747. 6.3.2.3 Americ

18、an National Standards Institute Inc. (ANSI) 1430 Broadway, New York, NY 10018. 6.4 Bational stock mers NSNs) . The following is a list of NSNs assigned which correspond to this CID. This list may not be indicative of all possible NSNs associated with this CID. NSNS: 6 15O-oO-565-599 1,6 150-O1-O84-6

19、385,6150-O1-OO4-8773,6150-01-254-2625 6.5 Known sou rces. The following is a list of sources known to meet the requirements of this commercial item description. a. Belden Wire & Cable Company, P.O. Box 1980, Richmond, IN 47375 b. The Berguist Company, 5300 Edina Indl, Minneapolis, MN 55439 c. Genera

20、l Cable Company, 4 Tesseneer Dr., Highland Heights, KY 41076 d. LZR Electronics Inc., 8051 Cessna Ave., Gaithersburg, MD 20879 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-55815 m 9999974 0371473 914 m A-A-558 1 5 e. Power Dynamics Inc. (PDI

21、), PO Box 539, 59 Lakeside Ave., West Orange, NJ f. Rodaie Technical Sales Inc., 577 Main Street, Islip, NY 11751 MILITARY INTERESTS: Custodians Air Force - 99 Reviewers Army - ME Navy - SH Air Force - 11, 85 DLA - ES CNIL AGENCY COORDINATING ACTMTY: GSA -*7FXE PREPARING ACTIVITY: DLA - GS Project 6150 - 0253 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-