1、W OLB054 0005730 238 111 INCH-POUND A-A-59518 17 November 1999 SUPERSEDING MIL-C-19734C (MC) 9 October 1990 COMMERCIAL ITEM DESCRIPTION CARRTER: SWORD SCABBARD The General Services Administration has authorized the use of this commercial item description as a replacement for classes 1 and 2 of MIL-C
2、- 19734 for all Federal agencies. 1. SCOPE. This document covers two classes of sword carriers intended for carrying the sword and scabbard used by Marine Corps personnel. 2. CLASSIFICATION. The carriers shad be in the following classes: Class 1 - Carrier, Sword, Dress, White Class 2 - Carrier, Swor
3、d, Service, Black 3. SALIENT CHARACTERISTICS 3.1 Description Carriers shall be in accordance with Figure 1 in order to insure interface with the sword scabbard. The fiont ply of the carrier shall have a slit for insertion of the sword scabbard. There shall be an opening at the bottom end of the carr
4、ier for the sword scabbard and a loop opening at the top for attaching the carrier to a belt. The carrier shall be 8-314 2 1/8 inches in length and 4-3/4 _+ 1/8 inches in width at the widest point. Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use
5、 in improving this document should be addressed to: Defense Sutmlv Center Phiiadeli3hia Clothino , O land Textiles Directorate, Am: DSCP-COET, 700 Robbins Aven color not as specified; any part shaded; open seams, thread ends not removed, or loose tension resulting in loose seams; any material defect
6、s, distorted parts or poor workmanship; any component part omitted; label missing, incorrect, or illegible; markings on label not permanent (markings rub off); dimensions of item not as specified in Figure 1; position of holes and slit not as specified; bar code omitted or not readable by scanner; h
7、uman-readable interpretation RI) omitted or illegible; bar code not visible on folded, packaged item; bar code causes damage to the item; any items not packaged in accordance with the contract or purchase order. 5.3 Acceptance critena. Acceptance criteria shall be as specified in the contract or pur
8、chase order. 6. PACKAGING 6.1 Preservation, packiw, and marking. Preservation, packmg, and marking shall be as specified in the contract or order. 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-rn 9038054 0005732 O00 m A-A-5 95 18 -7. NOTES 7.1 So
9、urce of Government documents. Copies of military and Federal documents are available from: Standardization Documents Order Desk Bldg. 4D 700 Robbins Avenue Philadelphia, PA 19 1 1 1-5094 7.2 Source of non-Government documents ASTM Test Methods (Applications for copies should be addressed to American
10、 Society For Testing and Materials, 1 O0 Barr Harbor Drive, West Conshohocken, PA 19428.) AATCC Test Methods (Applications for copies should be addressed to Amencan Association of Textile Chemists and Colorists (AATCC), P.O. Box 122 15, Research Triangle Park, NC 27709-22 15.) MILITARY INTERESTS: cu
11、stodians Navy - MC CIVIL AGENCY COORDINATING ACTIVITY: GSA - FSS PREPAFUNG ACTIVITY: DLA - CT (PROJ: 8465-0261) Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- E 90L8054 0005733 T47 E A-A- 5 9 5 18 +1#2“ 118“ FROM EDGE WIDEST POINT a-314“ I SIDE VIEW c FIGURE 1. CARRIER: SWORD SCABBARD 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1