DLA A-A-59891-2012 ANCHOR ROCK CAMMING DEVICE REPLACMENT KIT.pdf

1、 AMSC N/A FSC 8465 A-A-59891 July 12, 2012 COMMERCIAL ITEM DESCRIPTION ANCHOR, ROCK, CAMMING DEVICE, REPLACMENT KIT The General Services Administration has authorized the use of this commercial item description for all Federal agencies. 1. SCOPE. This Commercial Item Description (CID) covers the req

2、uirements for a kit that replaces the Anchor, Rock, Camming Devices (A-A-59846) issued in the Assault Climber Team Kit (ACTK), (A-A-59873). It will provide sets of Anchor, Rock, Camming Devices to allow Assault Climbers to perform the same tasks as Soldiers who are issued the ACTK. 2. CLASSIFICATION

3、. The Anchor, Rock, Camming Device, Replacement Kits will be furnished in two kits. 2.1 Types. Type I Small Camming Devices Type II Large Camming Devices 3. SALIENT CHARACTERISTICS. The kits shall be composed of the following items in the following quantities as listed in Table I and Table II: TABLE

4、 I. List of items in Type I Small camming devices kit Comments, suggestions, or questions on this document should be addressed to: Attn: DLA Troop Support, Standardization Team, 700 Robbins Avenue, Philadelphia, PA 19111-5096. Since contact information can change, you may want to verify the currency

5、 of this address information using Acquisition Streamlining and Standardization Information System (ASSIST) online database at https:/assist.dla.mil. Item Name CID Type Size Quantity Anchor, Rock, Camming Device A-A-59846 I 00 1 Anchor, Rock, Camming Device A-A-59846 I 0 1 Anchor, Rock, Camming Devi

6、ce A-A-59846 I 1 1 Anchor, Rock, Camming Device A-A-59846 I 2 1 METRIC Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59891 2 TABLE II. List of items in Type II Large camming devices kit 3.1 Dimensions. Individual item dimensions will be in acco

7、rdance with drawings and specification requirements specified in the applicable CID document (see Table I and Table II) unless item is a manufacturers part number/cage code then, in which manufacturers current specifications apply. 3.2 Color. Individual item colors will be in accordance with applica

8、ble specifications (see Table I and Table II). 3.3 End item testing. Individual item test standards will be in accordance with their related International Climbing and Mountaineering Federation Standards, where applicable. 3.4 Materials. Individual item materials will be in accordance with applicabl

9、e specifications (see Table I and Table II). 3.5 Workmanship. The Anchor, Rock, Camming Device, Replacement Kits shall conform to the quality of product established by this document. The occurrence of defects shall not exceed the contractors own quality assurance standards and the quality assurance

10、standards defined in the technical data in the solicitation and/or contract. 3.6 Service life. The Anchor, Rock, Camming Device, Replacement Kits shall have no unexpected material or component failures during a continuous one-year cycle. The Anchor, Rock, Camming Device, Replacement Kits shall have

11、no unexpected material or component failures during periodic use over a five year period. 3.7 Labels/barcoding/instruction slip. If applicable, all labeling, barcoding and instruction slip requirements shall be as specified in the solicitation or contract (see 7.2). 3.7.1 Labels. Each Anchor, Rock,

12、Camming Device, Replacement Kit shall have identification label Class 5 conforming to Type VI of MIL-DTL-32075. The color of the label shall be white. The following information shall be included in the printing for the identification label: ANCHOR, ROCK, CAMMING DEVICE, REPLACMENT KIT NSN: XXXX-XX-X

13、XX-XXXX (Example) The following instruction information shall be supplied: a. The name or trademark of the manufacturer, importer or supplier b. The meaning of any marking on the product c. The use of the product Item Name CID Type Size Quantity Anchor, Rock, Camming Device A-A-59846 I 3 1 Anchor, R

14、ock, Camming Device A-A-59846 I 4 1 Anchor, Rock, Camming Device A-A-59846 I 5 1 Anchor, Rock, Camming Device A-A-59846 I 6 1 Anchor, Rock, Camming Device A-A-59846 I 7 1 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59891 3 d. How to choose ot

15、her components for use in the system e. How to maintain and service the product f. The lifespan of the product or how to access it g. The effects of chemical reagents and temperature on the product h. The effects of storing and aging i. Identification of the model, if more than one model is availabl

16、e 4. REGULATORY REQUIREMENTS. The offeror/contractor is encouraged to use recovered materials to the maximum extent practicable, in accordance with paragraph 23.403 of the Federal Acquisition Regulation (FAR). 4.1 Recycled, recovered, or environmentally preferable materials. Recycled, recovered, or

17、environmentally preferable materials should be used to the maximum extent possible, provided that the material meets or exceeds the operational and maintenance requirements and promotes economically advantageous life cycle costs. 5. PRODUCT CONFORMANCE PROVISIONS. 5.1 Product conformance. The produc

18、ts provided shall meet the salient characteristics of this Commercial Item Description, conform to the producers own drawings, specifications, standards, and quality assurance practices, and be the same product offered for sale in the commercial marketplace. The Government reserves the right to requ

19、ire proof of such conformance. 5.2 End item examination. Each kit shall be examined for the following defects as listed in Table III: TABLE III. End item examination Examine Defect Description Components Missing components Incorrect item, size, type or color 5.3 Acceptance criteria. Acceptance crite

20、ria shall be as specified in the contract or purchase order (see 7.3). 6. PACKAGING. 6.1 Preservation, packing and marking. The preservation, packing and marking shall be as specified in the contract or order (see 7.2) and as below. 7. NOTES. 7.1 Sources of Government documents. 7.1.1 Copies of Gove

21、rnment documents are available online at https:/assist.dla.mil/quicksearch or from the Standardization Documents Order Desk, Building 4D, 700 Robbins Avenue, Philadelphia, PA 19111-5094. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59891 4 7.1

22、.2 Federal Acquisition Regulations are available online at http:/acquisition.gov/far/index.html or by contacting the Superintendent of Documents at 202-512-1800. 7.2 Ordering data. The contract or order should specify the following: a. Title, number, and date of this Commercial Item Description. b.

23、When required, labeling, barcoding and instruction slip (see 3.7) c. Acceptance criteria (see 5.3) d. Packaging (see 6.1) 7.3 National Stock Numbers (NSNs). The following is a list of NSNs and Sizes associated for Type I, to determine the required items for the replacement kit that corresponds to A-

24、A-59846, Anchor, Rock, Camming Device, listed below: NSNs SIZES 8465-01-578-7851 00 8465-01-578-7533 0 8465-01-578-7530 1 8465-01-578-7829 2 8465-01-578-7534 3 8465-01-578-7535 4 8465-01-578-7711 5 8465-01-578-7763 6 8465-01-578-7483 7 7.4 Key words. Climbing MILITARY INTERESTS: CIVIL AGENCY COORDIN

25、ATING ACTIVITY: Custodians: GSA-FSS Army GL Navy - MC PREPARING ACTIVITY: DLA-CT Project Number: 8465-2012-005 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil. . Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-