DLA MIL-DTL-43994 D-2008 MARKER IDENTIFICATION FIRE CHEMICAL HAZARD AND RESTRICTED AREA REFLECTIVE《防火 化学危险品和禁区反射标志》.pdf

1、 INCH-POUND MIL-DTL-43994D 15 APRIL 2008 SUPERSEDING MIL-M-43994C 2 January 1991 DETAIL SPECIFICATION MARKER, IDENTIFICATION, FIRE, CHEMICAL HAZARD, AND RESTRICTED AREA, REFLECTIVE This specification is approved for use by all Departments and Agencies of the Department of Defense. 1. Scope 1.1 Scope

2、. This specification covers markers processed on pressure-sensitive adhesive backed retroreflective sheeting. 1.2 Classification. The markers will be of the following types, marker numbers, sizes, and classes as specified (see 6.2): Type I - Fire Hazard Marker 1 - Hazard class 1.1 Marker 2 - Hazard

3、class 1.2 Marker 3 - Hazard class 1.3 Marker 4 - Hazard class 1.4 Size - 24 inch Size - 12 inch Type II - Chemical Hazard Marker 5 - Wear full protective clothing Class 1 - Red Class 2 - Yellow Class 3 - White Comments, suggestions, or questions on this document should be addressed to Defense Supply

4、 Center Philadelphia, ATTN: DSCP-NASA, 700 Robbins Avenue, Philadelphia, PA 19111-5096 or email to dscpg incorrect; illegible; of improper size, location, sequence, or method of application Materials Any component missing, damaged, or not as specified Workmanship Inadequate application of components

5、, such as: incomplete sealing or closure of flap. improper taping, loose strapping or inadequate stapling Bulged or distorted container Content Weight of contents per container exceeds specified limits 5. PACKAGING 5.1 Packaging. For acquisition purposes, the packaging requirements shall be as speci

6、fied in the contract or order (see 6.2). When packaging of material is to be performed by DoD or inhouse contractor personnel, these personnel need to contact the responsible packaging activity to ascertain packaging requirements. Packaging requirements are maintained by the Inventory Control Points

7、 packaging activities within the Military Services or Defense Agency, or within the military services system commands. Packaging data retrieval is available from the managing Military Departments or Defense Agencys automated packaging files, CD-ROM products, or by contacting the responsible packagin

8、g activity. 6. NOTES (This section contains information of a general or explanatory nature that may be helpful, but is not mandatory.) 6.1 Intended use. Type I markers are intended to convey fire fighting personnel the kind of hazard presented by fires involving various types of ammunition and explo

9、sives in storage. Type II markers identify the type of chemical agent in storage and the type of precautions to be taken in fighting fires involving specific chemical agents (see 6.4). Type III markers (decals) are intended for use as a means of warning individuals as to the restrictions of the area

10、 they are entering. 6.2 Acquisition requirements. Acquisition documents must specify the following: a. Title, number, and date of this specification. b. Type, marker number, class, and size (see 1.2). c. When a first article is required (see 3.1, 4.2 and 6.3). d. Packaging requirements. Provided by

11、IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-43994D 76.3 First article. When a first article is required, it shall be inspected and approved under the appropriate provisions of FAR 52.209. The first article should be a preproduction sample. The contra

12、cting officer should specify the appropriate type of first article and the number of units to be furnished. The contracting officer should also include specific instructions in acquisition documents regarding arrangements for selection, inspection, and approval of the first article. 6.4 User informa

13、tion. When markers 8, 10, 11 or 12 are used, marker 5, class 1 (red) must also be used. When marker 9 is used, marker 5, class 2 (yellow) must also be used. When marker 7 is used, marker 6 must also be used. 6.5 Shelf-life. This specification covers items where the assignment of a Federal shelf-life

14、 code is a consideration. Specific shelf-life requirements should be specified in the contract or purchase order, and should include, as a minimum, shelf-life code, shelf-life package markings in accordance with MIL-STD-129 or FED-STD-123, preparation of a material quality storage standard for type

15、II (extendible) shelf-life items, and a minimum of 85 percent shelf-life remaining at time of receipt by the Government. These and other requirements, if necessary, are in DoD 4140.27-M, Shelf-life Management Manual. The shelf-life codes are in the Federal Logistics Information System Total Item Rec

16、ord. Additive information for shelf-life management may be obtained from DoD 4140.27-M, or the designated shelf-life Points of Contact (POC). The POC should be contacted in the following order: (1) the Inventory Control Points that manage the item and (2) the DoD Services and Agency administrators f

17、or the DoD Shelf-Life Program. Apprropriate POCs for the DoD Shelf-Life Program can be contacted through the DoD Shelf-Life Management website: https:/www.shelflife.hq.dla.mil/. 6.6 Subject term (key word) listing. Pressure-sensitive Retroreflective Warning 6.7 Changes from previous issue. Marginal

18、notations are not used in this revision to identify changes with respect to the previous issue due to the extensiveness of the changes. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-43994D 8MARKER 1 MARKER 2 (FIRE HAZARD CLASS 1.1) (FIRE HA

19、ZARD CLASS 1.2) MARKER 3 MARKER 4 (FIRE HAZARS CLASS 1.3) (FIRE HAZARS CLASS 1.4) MARKER A B NUMERAL SIZE A B NUMERAL SIZE 1 24” - 10”H x 2”W 12” - 5”H x 1”W 2 24” 8” 10”H x 2”W 12” 4” 5”H x 1”W 3 24” - 10”H x 2”W 12” - 5”H x 1”W 4 24” - 10”H x 2”W 12” - 5”H x 1”W FIGURE 1. Markers 1 thru 4. Provide

20、d by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-43994D 9MARKER 5 MARKER 6 MARKER 7 WEARFULL PROTECTIVE WEARFULL BREATHING APPLY NO WATER CLOTHING APPARATUS MARKER A B C A B C 5 24” “ - 12” “ - 6 24” “ - 12” “ - 7 24” “ 8” 12” “ 4” MARKER 8 MARKER 9

21、MARKER 10 SEE NOTE SEE NOTE SEE NOTE MARKER 11 MARKER 12 SEE NOTE SEE NOTE NOTE: 24 INCH SIZE = 24 INCH O.D. WITH 12 INCH HIGH x 2 INCH WIDE LETTERS 12 INCH SIZE = 12 INCH O.D. WITH 6 INCH HIGH x 1 INCH WIDE LETTERS FIGURE 2. Markers 5 thru 12. Provided by IHSNot for ResaleNo reproduction or network

22、ing permitted without license from IHS-,-,-MIL-DTL-43994D 10MARKER A B 13 3 3/8” 5/16” 14 3 3/8” 5/16” 15 3 3/8” 5/16” FIGURE 3. Markers 13 thru 15.MARKER 14 NO RECORDING MARKER 13 NO PHOTOGRAPHY MARKER 15 NO NOTES Provided by IHSNot for ResaleNo reproduction or networking permitted without license

23、from IHS-,-,-MIL-DTL-43994D 11MARKER 16 MARKER 17 MARKER A (INCHES) B (INCHES) 16 24 12 16 36 30 16 48 24 17 24 12 17 36 30 17 48 24 FIGURE 4. Markers 16 and 17.Controlled Area It is unlawful to enter this area without Permission of the Installation Commander. Sec. 21, Internal Security Act of 1950;

24、 50 U.S.C. 797 While on this Installation all personnel and the property under their control are subject to search. Restricted Area It is unlawful to enter this area without Permission of the Installation Commander. Sec. 21, Internal Security Act of 1950; 50 U.S.C. 797 While on this Installation all

25、 personnel and the property under their control are subject to search. A B Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-43994D 12Custodians: Preparing activity: Army GL DLA-IS Air Force - 99 (Project 7690-2008-003) NOTE: The activities lis

26、ted above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-