DLA MIL-DTL-83538 7 B-2008 CONNECTORS AND ACCESSORIES ELECTRICAL CIRCULAR UMBILICAL COVER PROTECTIVE STORE RECEPTACLE FOR MIL-STD-1760 APPLICATIONS (METRIC).pdf

1、 METRICMIL-DTL-83538/7B 2 June 2008 SUPERSEDING MIL-DTL-83538/7A 24 December 1998 DETAIL SPECIFICATION SHEET CONNECTORS AND ACCESSORIES, ELECTRICAL, CIRCULAR, UMBILICAL, COVER, PROTECTIVE, STORE RECEPTACLE FOR MIL-STD-1760 APPLICATIONS (METRIC) This specification is approved for use by all Departmen

2、ts and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-83538. FIGURE 1. Protective store cover receptacle. AMSC N/A FSC 5935 Provided by IHSNot for ResaleNo reproduction or networking permitted w

3、ithout license from IHS-,-,-MIL-DTL-83538/7B 2 FIGURE 1. Protective store cover receptacle - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-83538/7B 3 mm Inches mm Inches mm Inches mm Inches mm Inches 0.15 .006 2.67 0.105 4.60 0.1

4、81 9.93 0.391 35.26 1.388 0.20 .008 2.94 0.1157 4.85 0.190 10.03 0.395 35.36 1.392 0.25 .010 2.95 0.116 5.11 0.201 17.65 0.695 37.39 1.472 1.35 .053 3.05 0.120 5.21 0.205 17.91 0.705 37.64 1.482 1.45 .057 3.15 0.124 5.26 0.207 32.03 1.261 39.57 1.558 1.63 .064 3.55 0.140 5.41 0.213 32.13 1.265 39.68

5、 1.562 1.70 .067 3.81 0.150 6.99 0.275 34.06 1.341 40.13 1.580 1.73 .068 3.96 0.156 7.24 0.285 34.16 1.345 40.39 1.590 1.85 .073 4.01 0.158 9.65 0.380 34.57 1.361 43.82 1.725 2.54 0.100 4.27 0.168 9.91 0.390 34.72 1.367 NOTES: 1. Dimensions are in millimeters. 2. Inch equivalents are for information

6、 only. FIGURE 1. Protective store cover receptacle - Continued. REQUIREMENTS: Dimensions and configurations: See figure 1. This protective cover mates with MIL-DTL-83538/1. Part or Identifying Number (PIN) example: M83538/7-1. QUALIFICATION: Protective covers shall be in accordance with the qualific

7、ation requirements of MIL-DTL-83538. The following details and exceptions shall apply: Group A: Visual and mechanical examination (100% inspection). Group B: Not applicable. Qualification and group C: Two MIL-DTL-83538/7 protective covers with mating connectors shall be required for stand alone qual

8、ification. However, if a manufacturer is in the process of qualifying MIL-DTL-83538/1 concurrently with MIL-DTL-83538/7, then one protective cover and mating connector shall be required. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-DTL-83538/7

9、B 4 Manufacturers that are qualifying this protective cover as a stand alone accessory, shall conduct the following sequence of tests: Visual and mechanical examination Salt spray Humidity Sand and dust Coupling torque Post test examination. Manufacturers that are qualifying the MIL-DTL-83538/1 conc

10、urrently with the MIL-DTL-83538/7, shall conduct the following sequence of tests: Visual and mechanical examination Salt spray Coupling torque Post test examination. All testing shall be in accordance with MIL-DTL-83538. Changes from the previous issue: Marginal notations are not used in this revisi

11、on to identify changes with respect to the previous issue due to the extent of the changes. Referenced documents. In addition to MIL-DTL-83538, this document references the following: MIL-DTL-83538/1 MIL-STD-1760 CONCLUDING MATERIAL Custodians: Preparing activity: Army CR DLA - CC Navy - AS Air Forc

12、e 85 DLA - CC Review activities: Army - AR, MI (Project 5935-2007-046) Navy - EC, MC, OS Air Force - 19, 99 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-