DLA MS27616 REV B-2009 ADAPTER ASSEMBLY FLARED STRAIGHT TUBE TO HOSE-WITH SWIVEL NUT.pdf

1、 MS27616B 14 October 2009 SUPERSEDING MS27616A 29 September 2000 DETAIL SPECIFICATION SHEET ADAPTER ASSEMBLY, FLARED, STRAIGHT, TUBE TO HOSE-WITH SWIVEL NUT This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product

2、 described herein shall consist of this specification sheet and MIL-DTL-83296. FIGURE 1. Straight, flared, adapter assembly. AMSC N/A FSC 4730 INCH-POUND Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27616B 2 PIN Nipple sub assembly Sleeve Socket

3、 A max inch (cm) MS27616-4C MS27619-4C MS27623-4C MS27622-4C 1.58 (4.01) MS27616-6C MS27619-6C MS27623-6C MS27622-6C 1.69 (4.29) MS27616-8C MS27619-8C MS27623-8C MS27622-8C 1.99 (5.06) MS27616-10C MS27619-10C MS27623-10C MS27622-10C 2.13 (5.41) NOTES: 1. Dimensions are in inches. 2. Metric equivalen

4、ts are given for information only. 3. Dimensioning and tolerancing are in accordance with ASME Y14.5M. FIGURE 1. Straight, flared, adapter assembly Continued. REQUIREMENTS: Dimensions and configurations: The design, construction, and physical dimensions shall be in accordance with MIL-DTL-83296 and

5、figure 1, in case of conflict between this specification sheet and MIL-DTL-83296, this specification sheet shall govern. This part for use with MIL-DTL-83298 hose and hose assemblies in accordance with MIL-DTL-32330. Material: Material shall be a corrosion resistant steel (CRES). Finish: Finish shal

6、l be passivated in accordance with MIL-DTL-83296. PIN example: MS27616 -4 C PIN example: MS27616-4C indicates a straight adapter assembly 1/4 inch, CRES. Specification sheet number Dash size (see figure 1) Material (C for CRES) MS prefix Provided by IHSNot for ResaleNo reproduction or networking per

7、mitted without license from IHS-,-,-MS27616B 3 Changes from previous issue. Marginal notations are not used in this revision to identify changes due to the extent of the changes Referenced documents. In addition to MIL-DTL-83296, this document references the following: MIL-DTL-32330 MIL-DTL-83298 AS

8、ME Y14.5M SAE-AS4395 CONCLUDING MATERIAL Custodians: Preparing activity: Army - AV DLA - CC Navy - AS Air Force - 99 (Project 4730-2008-034) DLA - CC Review activities: Navy - MC, SA Air Force - 71 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-