DLA MS27616 REV B-2009 ADAPTER ASSEMBLY FLARED STRAIGHT TUBE TO HOSE-WITH SWIVEL NUT.pdf

上传人:吴艺期 文档编号:696815 上传时间:2019-01-02 格式:PDF 页数:3 大小:32.42KB
下载 相关 举报
DLA MS27616 REV B-2009 ADAPTER ASSEMBLY FLARED STRAIGHT TUBE TO HOSE-WITH SWIVEL NUT.pdf_第1页
第1页 / 共3页
DLA MS27616 REV B-2009 ADAPTER ASSEMBLY FLARED STRAIGHT TUBE TO HOSE-WITH SWIVEL NUT.pdf_第2页
第2页 / 共3页
DLA MS27616 REV B-2009 ADAPTER ASSEMBLY FLARED STRAIGHT TUBE TO HOSE-WITH SWIVEL NUT.pdf_第3页
第3页 / 共3页
亲,该文档总共3页,全部预览完了,如果喜欢就下载吧!
资源描述

1、 MS27616B 14 October 2009 SUPERSEDING MS27616A 29 September 2000 DETAIL SPECIFICATION SHEET ADAPTER ASSEMBLY, FLARED, STRAIGHT, TUBE TO HOSE-WITH SWIVEL NUT This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product

2、 described herein shall consist of this specification sheet and MIL-DTL-83296. FIGURE 1. Straight, flared, adapter assembly. AMSC N/A FSC 4730 INCH-POUND Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27616B 2 PIN Nipple sub assembly Sleeve Socket

3、 A max inch (cm) MS27616-4C MS27619-4C MS27623-4C MS27622-4C 1.58 (4.01) MS27616-6C MS27619-6C MS27623-6C MS27622-6C 1.69 (4.29) MS27616-8C MS27619-8C MS27623-8C MS27622-8C 1.99 (5.06) MS27616-10C MS27619-10C MS27623-10C MS27622-10C 2.13 (5.41) NOTES: 1. Dimensions are in inches. 2. Metric equivalen

4、ts are given for information only. 3. Dimensioning and tolerancing are in accordance with ASME Y14.5M. FIGURE 1. Straight, flared, adapter assembly Continued. REQUIREMENTS: Dimensions and configurations: The design, construction, and physical dimensions shall be in accordance with MIL-DTL-83296 and

5、figure 1, in case of conflict between this specification sheet and MIL-DTL-83296, this specification sheet shall govern. This part for use with MIL-DTL-83298 hose and hose assemblies in accordance with MIL-DTL-32330. Material: Material shall be a corrosion resistant steel (CRES). Finish: Finish shal

6、l be passivated in accordance with MIL-DTL-83296. PIN example: MS27616 -4 C PIN example: MS27616-4C indicates a straight adapter assembly 1/4 inch, CRES. Specification sheet number Dash size (see figure 1) Material (C for CRES) MS prefix Provided by IHSNot for ResaleNo reproduction or networking per

7、mitted without license from IHS-,-,-MS27616B 3 Changes from previous issue. Marginal notations are not used in this revision to identify changes due to the extent of the changes Referenced documents. In addition to MIL-DTL-83296, this document references the following: MIL-DTL-32330 MIL-DTL-83298 AS

8、ME Y14.5M SAE-AS4395 CONCLUDING MATERIAL Custodians: Preparing activity: Army - AV DLA - CC Navy - AS Air Force - 99 (Project 4730-2008-034) DLA - CC Review activities: Navy - MC, SA Air Force - 71 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-

展开阅读全文
相关资源
猜你喜欢
相关搜索

当前位置:首页 > 标准规范 > 国际标准 > 其他

copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1