DOD A-A-54194-1990 STOPPER BOTTLE (RUBBER SOLID)《瓶塞(固体橡胶)》.pdf

1、A-A-54194 25 June 199Q COMMERCIAL ITEM DESCRIPTION STOPPER, BOTTLE (Rubber, Solid) The eneral Services Administration has authorized the use of this Commercial Item Description in preference to Type A, rade I, Stopper Numbers O0 to 2 of Federal Specification ZZ-S-7Sla which is cancelled. This Commer

2、cial Item Description covers solid rubber bottle stoppers for use in a chemical or clinical laboratory. Salient Characteristicgi Shall be solid black rubber stoppers for use as closures on bottles used in laboratory procedures. Shall be of the following stopper number sizes with the indicated dimens

3、ions: O0 0 1 2 15 17 19 20 10 13 14 16 25 25 25 25 A tolerance of +/- 1 millimeter (mm) shall be permitted for the dimensional requirements applicable to the diameters (top and bottom) and lengths of the stoppers. Shall be fabricated from natural rubber or synthetic rubber, or from a mixture of natu

4、ral and synthetic rubber. Shall have each stopper supplied with the applicable stopper number size identified in the form of raised numbers on the top side. WgykganshiE, The stoppers shall be free from defects which detract ffom its appearance or impair its serviceability. AMSC N/A FSC 6640 . DISTRI

5、BUTION STATEMENT A: Approved for public releage; distribution is unlimited. a Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- A-A-54174 bb m 7777774 005b27b 2 W A-A- 54 194 - Unit. Package (Pa). For stopper number 00, one package containing one hund

6、red bottle stoppers, as specified, constitutes one unit. For stopper number O, one package containing seventy-five bottle stoppers, as specified, constitutes one unit. For stopper number 1, one package containing fifty-five bottle stoppers, as specified, constitutes ohe unit. Forstopper number 2, on

7、e package containing fifty bottle stoppers, as specified, constitutes one unit. oal44,Assrance_or- - Responsibility -_- -_- for inspection. _- Unless otherwise specif-ied in the contract or purchase order, the contractor is responsible for the performance of all inspection requirements as specified

8、herein. Except as otherwise specified in the contract or purchase order, the contractor may use his own or any facilities suitable for the perfrmance of the inspection requirements specified herein, unless disapproved by the Government. The overnment reserves the right to perform any of the inspecti

9、ons set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescri.bed requirements. - Records. Records of examinations and tests performed by or for the contractor shall be maintained by the contractor and made available to the overnmen

10、t upon the Governments request, at any time, or from time to time, during the performance of the contract and for a period of three years after delivery of the suppliesto which-such records relate. I - Insgection. - Inspection, as used herein, is defined as .both examination (such as visual or audit

11、ory investigation without the use of special laboratory appliances or procedures) and testing (determination by technical means of physical and chemical properties) of the item. - Inspections -_- and testing, Inspections and testing shall be conducted on the bottle stoppers in accordance with commer

12、cial practice. Sampling for inspections and testing shall be in accordance with commercial practice. 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-54174 bb 7777774 005b277 4 A-A-54 194 0 Mgtrio products. Products manufactured to metric dimens

13、ions will be considered qn an equal basis with those manufactured using inch-pound units, providing they fall within the tolerances specified using conversion tables contained in the latest revision of Federal Standard 376, and all other requirements of this document are met. If a product is manufac

14、tured to metric dimensions and those dimensions exceed the tolerances specified in the inch/pound units, a request should be made to the contracting officer to determine if the product is acceptable. The contracting officer has the option of accepting or rejecting the product. contractoy-eytlflcatio

15、n, The contractor shall certify that the product offered meets the salient characteristics of this description and conforms to the producers own drawings, specifications, standards, and quality assurance practices. The Glovernment reserves the right to require proof of such conformance prior to firs

16、t delivery and thereafter as may be otherwise provided for under the provisions of the contract. Federal Food, Drug and Cosmetic Act. If the product covered by this document has been determined by the U.S. Food and Drug Administration to be under its jurisdiction, the offeror/contractor shall comply

17、, and be responsible for compliance by its subcontractors/suppliers, with the requirements of the Federal Food, Drug and Cosmetic Act, as amended, and regulations promulgated thereunder. In addition, the offeror/contractor shall comply, and be responsible for compliance by its subcontractors/supplie

18、rs, with the requirements of all other applicable Federal, State, and local statutes, ordinances and regulations. 0 igggygg-ggterials, The offeror/contractor is encouraged to use recovered material in accordance with Public Law 94-580, as amended, and as implemented by Federal Acquisition Regulation

19、 Subpart 23.4 to the maximum extent practical. PregeratLon,Eaokag-a-ag Unless otherwise specified, preservation, packaging, and packing shall be to a degree of protection to preclude damage to containers and/or contents thereof under normal shipping conditions, handling, etc, involving shipment from

20、.the supply source to the receiving activity, plus reshipment from receiving activity, and shall conform to applicable carriers rules and regulations. Intermediate and exterior package quantities and labeling and marking.shal1 be as specified in the contract and/or orider. 3 Provided by IHSNot for R

21、esaleNo reproduction or networking permitted without license from IHS-,-,-_ A-A-54174 bb m 9477774 005b29 b m A-A-54194 Ordering-data. (Stopper number(s) required, intermediate/ exterior package quantities, labeling, and marking must be specified in the contract and/or order.) . L NOTE: The followin

22、g National Stock Numbers are covered by this document Number - Item Identification - - NSN - 6640-00-316-0278 STOPPER; BOTTLE, Rubber, Solid, O0 No. 00, 100s 6640-00-316-0279 STOPPER, BOTTLE, Rubber, Solid, .o No. O, 75s 6640-00-316-0280 STOPPER, BOTTLE, Rubber, Solid, 1 No. 1, 55s 6640-00-316-0281

23、STOPPER, BOTTLE, Rubber, Solid, 2 No. 2, 50s NOTE: Commercial one pound bags of bottle stoppers, conforming to specification requirements, will be acceptable provided the quantity of stoppers within each bag includes (as minimum) the . number of stoppers required by the applicable National Stock Num

24、ber. MILITARY INTERESTS: Cggtodians: Army - MD Navy - MS Air Force - 03 PREPARING ACTIVITY: DoD-MB Agent: DLA-DM CIVIL AGENCY COORDINATING ACTIVITIES: VA-OSS PHS FDA-MPQAS Project Number: 6640-1634 Location: ENABLE/STOPPERC/31 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-