DOD A-A-54874-1993 BANDAGE ELASTIC RUBBER WARP THREADS《橡胶包装线弹性绷带》.pdf

1、. A-A-54874 m 9999974 0144501 b8T m A-A-54 8 7 4 21 May 1993 COMMERCIAL ITEM DESCRIPTION BANDAGE, ELASTIC, RUBBER WARP THREADS The General Services Administration has authorized the use of this Commercial Item Description as a replacement for Military Specification MIL-B-36998B which is cancelled. T

2、his Commercial Item Description covers elastic bandages with rubber warp threads. Salient characteristics: Shall be rubber elastic bandage suitable for use as a pressure bandage, support, or binder in the treatment of orthopedic and post-operative patients. The length of the unstretched bandage shal

3、l be 57 inches minimum and the stretched length shall be a minimum average of 162 inches. As an alternate, the length of the unstretched bandage shall be 67 inches minimum and the stretched length shall be a minimum average of 180 inches. Unstretched bandages shall be of the following widths: SIZE 1

4、 2 3 4 WIDTH 2 inches (5.08 cm) 3 inches (7.62 cm) 4 inches (10.16 cm) 6 inches (15.24 cm) AMSC N/A FSC 6510 DISTRIBUTION STATEMENT A. Approved for public release: distribution is unlimited. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-54874 9

5、999974 0344502 5Lb A-A-54 87 4 The bandages shall have a minimum elasticity of 120 percent and shall be capable of returning a minimum of 110 percent of the original length. This shall be demonstrated by measuring a 10 inch length of bandage and stretching it to 22 inches for one hour, then releasin

6、g. The marked off portion of the bandage shall be remeasured. After subjection to 5 laundering cycles at 212OF and 5 drying cycles at 220F, the bandage shall have a minimum elasticity of 120 percent and a minimum return of 75 percent. The cut ends shall be sewn or otherwise treated to prevent raveli

7、ng. The edges shall be selvage. Each bandage shall be packaged with a minimum of two fastening clips made of corrosion resisting metal. bandage, they shall not loosen during laundering. Each bandage shall be one continuous piece and evenly and neatly rolled without tension. Bandages shall be flesh,

8、beige or off-white color and shall not be greige goods, but shall be finished and shall not contain substances that are toxic or irritating to the skin. Bandages shall show good colorfastness to water. If clips are sewn to the end of the The following styles shall be acceptable: Style A - Bandages s

9、hall be woven having a minimum of 30 cotton yarns per inch in the warp and a minimum of 10 heat resistant rubber strands per inch in the warp covered by cotton, multi-filament polyester or multi-filament nylon suitable for the intended purpose, and a minimum of 60 cotton yarns per inch in the fillin

10、g. The minimum weight per bandage shall be as follows: Minimum Bandage Weight (Ounce) SIZE includina bandaae fasteners The minimum breaking strength shall be 20 pounds in the warp. 2 1 2 3 4 0.88 1.32 1.76 2.60 U i) Provided by IHSNot for ResaleNo reproduction or networking permitted without license

11、 from IHS-,-,-A-A- 5 4 8 7 4 Style B - Bandages shall be knitted having a minimum of 10 rayon yarns per inch in the warp and a minimum of 10 covered heat resistant rubber strands per inch in the warp. The rubber strands shall have an inner covering of nylon and an outer covering of cotton. The filli

12、ng shall contain a minimum of 54 cotton yarns per inch. Each selvage may contain one nylon warp yarn. strength shall be 20 pounds. shall be as shown above. The minimum warp breaking The minimum weight per bandage Style C - The bandages shall be knitted having a minimum of 6 textured set polyester ya

13、rns per inch in the warp and a minimum of 6 heat resistant rubber strands per inch in the warp. The rubber strands shall be either covered with polyester or the bandage shall be constructed in such a fashion that bare rubber strands shall be covered by polyester yarns. The filling shall contain a mi

14、nimum of 20 picks per inch, each pick consisting of four textured set polyester yarns. The minimum weight per bandage shall be as follows: SIZE 1 2 3 4 Minimum Bandage Weight (Ounce) includinq bandaqe fasteners 0.48 0.73 0.97 1.45 The minimum warp breaking strength shall be 13 pounds. 3 Provided by

15、IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-54874 m 9999974 0344504 399 m A-A- 54 8 7 4 Style D - The bandages shall be knitted having a minimum of 12 textured set polyester yarns per inch in the warp and a minimum of 12 heat resistant rubber strands per

16、 inch in the warp. The rubber strands shall be either covered with polyester or the bandages shall be constructed in such-a fashion that bare rubber strands shall be covered by polyester yarns. The filling shall contain a minimum of 20 picks per inch, each pick consisting of four cotton yarns. The m

17、inimum weight per bandage shall be as follows: SIZE 1 2 3 4 Weight (Ounce) includins bandase fasteners 0.88 1.32 1.76 2.60 The minimum warp braking strength shall be 20 pounds. In lieu of fastening clips, the fastening of the bandage shall be accomplished by the mushroom hook part of a mushroom hook

18、 and pile closure. shall be sewn across the width of one end of the bandage. The mushroom hook part The minimum width of the mushroom hook part shall be as follows : SIZE 1 2 3 4 Minimum Width of Hook Closure (Inch) The mushroom hook part shall be one piece, except for size 4, the mushroom hook part

19、 shall be two pieces sewn in an abutting position across the width of the bandage. shall be a small gap between each piece of the mushroom hook part at their abutment at the approximate center of the width of the bandage. Both before and after the five laundering and drying cycles, the mushroom hook

20、 shall firmly fasten to any part of the bandage with the bandage in the stretched condition, no matter what the degree of stretch. With the bandage wrapped around a part of the body, the mushroom hook shall be capable of being fastened and unfastened with one hand. The mushroom hook shall not loosen

21、 on the bandage during laundering. There 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-54874 9999974 CIL44505 225 A-A-54 8 7 4 Workmanship. detract from their appearance or impair their serviceability. Bandages shall be free from defects whic

22、h Unit. Package (PG). One package containing 12 individually wrapped bandages, as specified, constitutes one unit. Each wrapped bandage shall include a minimum of two fastening clips. hook (of a hook and pile closure) is supplied, fastening clips are not required. When the alternate bandage fastened

23、 by a mushroom PUALITY ASSURANCE PROVISIONS. Responsibility for inspection. Unless otherwise specified in the contract or purchase order, the contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contract or purchase or

24、der, the contractor may use his own or any facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deem

25、ed necessary to assure supplies and services conform to prescribed requirements. Records. Records of examinations and tests performed by or for the contractor shall be maintained by the contractor and made available to the Government upon request, at any time, or from time to time, during the perfor

26、mance of the contract and for a period of three years after delivery of the supplies to which such records relate. Inspection. Inspection, as used herein, is defined as both examination (such as visual or auditory investigation without the use of special laboratory appliances or procedures) and test

27、ing (determination by technical means of physical and chemical properties) of the item. Sampling for examination and tests shall be conducted in accordance with MIL-STD-105, with an AQL of 2.5 (percent defective) and an inspection level of S-3. The unit of product for examination purposes shall be o

28、ne package of bandages. Samplina for examination and tests. Tests. Tests shall be conducted to determine compliance with specification requirements. Where feasible, the same sample shall be used for the determination of two or more text characteristics. Tests shall include, but shall not be limited

29、to, the following: 5 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-54874 m 9999974 OL4450b IbL m A-A-54874 Lenath. unstretched. The bandage, without tension, shall be laid out, on a smooth horizontal surface. measured parallel to the edge. The

30、bandage shall be laid on a horizontal surface and stretched to limit without application of mechanical force. While in the stretched position, the length of the bandage shall be measured parallel to the edges, to the nearest inch. The length shall be Stretched lenath. Elasticitv test. A full width b

31、andage (not previously stretched) shall be laid out on a flat horizontal surface without tension. A ten inch portion of the bandage shall be marked off and stretched to 22 inches. The bandage shall remain stretched to 22 inches for one hour, and then released. The marked off portion of the bandage s

32、hall be measured again (without tension). The percentage of stretch and return shall be computed as follows : x 100 L2 - L1 L1 Stretch, percent = L2 - L3 L1 Return, percent = x 100 Where: LI= Original length, prior to stretching. L2 = Stretched length. L3 = Relaxed length, after stretching. Metric P

33、roducts. Products manufactured to metric dimensions will be considered on an equal basis with those manufactured using inch-pound units, providing they fall within the tolerances specified using conversion tables contained in the latest revision of Federal Standard No. 376, and all other requirement

34、s of this document are met. If a product is manufactured to metric dimensions and those dimensions exceed the tolerances specified in the inch/pound units, a request should be made to the contracting officer to determine if the product is acceptable. The contracting officer has the option of accepti

35、ng or rejecting the product. 6 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-54874 9999934 0144.507 OT8 m A-A-54874 Contractor Certification. The contractor shall certify and maintain substantiating evidence that the product offered meets the s

36、alient characteristics of this Commercial Item Description, and that the product conforms to the producers own drawings, specifications, standards, and quality assurance practices. The government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be

37、 otherwise provided for under the provisions of the contract. Resulatorv reauirements. Federal Food, Druu. and Cosmetic Act. If the product covered by this document has been determined by the U.S. Food and Drug Administration to be under its jurisdiction , the offeror/contractor shall comply, and be

38、 responsible for compliance by its subcontractors/suppliers, with the requirements of the Federal Food, Drug, and Cosmetic Act, as amended, and regulations promulgated thereunder. In addition, the offeror/contractor shall comply, and be responsible for compliance by its subcontractors/suppliers, wit

39、h the requirements of all other applicable Federal, State, and local statutes, ordinances, and regulations. use recovered material in accordance with Federal Acquisition Regulation Subpart 23.4 to the maximum extent practical. Recovered material. The offeror/contractor is encouraged to 0 Preservatio

40、n, isackauina, R ackinu, labelinu, and markincr. Unless otherwise specified, preservation, packaging, and packing shall be to a degree of protection to preclude damage to containers and/or contents thereof under normal shipping conditions, handling, etc:, involving shipment from the supply source to

41、 the receiving activity, plus reshipment from receiving activity, and shall conform to applicable carriers rules and regulations. Intermediate and exterior package quantities and labeling and marking shall be as specified in the contract and/or order. Orderins data. Intermediate/exterior package qua

42、ntities, labeling and marking must be specified in the contract and/or order. 7 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-54874 m 9999974 0144508 T34 m A-A-54 8 7 4 NOTES: The following National Stock Numbers are covered by this document :

43、” 6510-00-935-5820 6510-00-935-5821 6510-00-935-5822 6510-00-935-5823 MILITARY INTERESTS: Custodians: Amy-MD Navy-MS Air Force-O3 Item Identification Size BANDAGE, ELASTIC, Rubber Warp 1 Threads, 2 inches by 4-1/2 yards (5.08 cm by 41.1480 m), 12s. Threads, 3 inches by 4-1/2 yards (7.62 cm by 41.148

44、0 m), 12s. Threads, 4 inches by 4-1/2 yards (10.16 cm by 41.1480 m), 12s. Threads, 6 inches by 4-1/2 yards (15.24 cm by 41.1480 m), 12s. BANDAGE, ELASTIC, Rubber Warp 2 BANDAGE, ELASTIC, Rubber Warp 3 BANDAGE, ELASTIC, Rubber Warp 4 PREPARING ACTIVITY: DoD-MB Agent : DLA-DM CIVIL AGENCY COORDINATING ACTIVITIES: VA-OSS USPHS FDA-MPQAS Project No. 6510-0811 8 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-