EN 13402-2-2002 en Size Designation of Clothes - Part 2 Primary and Secondary Dimensions《服装的尺寸牌号 第2部分 主要和次要尺寸》.pdf

1、BRITISH STANDARD Size designation of clothes Part 2: Primary and secondary dimensions The European Standard EN 13402-2:2002 has the status of a British Standard ICs 61.020 BS EN 13402-212002 Wk present to the responsible European committee any enquiries on the interpretation, or proposals for change

2、, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. - A list of organizations represented on this committee can be obtained on request to its secretary. Cr oss-r e fer enc e s The British Standards which implement international

3、 or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all

4、the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, the EN title

5、page, pages 2 to 6, an inside back cover and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. O BSI 15 April 2002 ISBN O 580 39507 3 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13402-2 March 2002 ICs 61.020 English version Size des

6、ignation of clothes - Part 2: Primary and secondary dimensions Dsignation des tailles de vtements - Partie 2: Mesures primaires et secondaires Grenbezeichnung von Bekleidung - Teil 2: Primr- und Sekundrmae This European Standard was approved by CEN on 24 January 2002 CEN members are bound to comply

7、with the CENKENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Management Cent

8、re or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official ve

9、rsions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION EUROP

10、ISCHES KOMITEE FR NORMUNG COMIT EUROPEN DE NORMALISATION Management Centre: rue de Stassart, 36 B-1050 Brussels O 2002 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13402-2:2002 E EN 13402-212002 (E) Contents Foreword 3 Introduct

11、ion . 3 1 Scope 4 2 Normative references 4 3 Terms and definitions 4 4 Definition of primary and secondary dimensions in garments . 4 2 EN 13402-212002 (E) Foreword This document (EN 13402-2:2002) has been prepared by Technical Committee CEN/TC 248 “Textiles and textile products“, the secretariat of

12、 which is held by BSI. It is one of a series of standards being prepared describing the size designation of clothes. Other standards in the series have the following titles: EN 13402-1, Size designation of clothes - Part I: Terms, definitions and body measurement procedure (ISO: 3635: 198 I modified

13、). prEN 13402-3, Size designation of clothes - Part 3: Measurements and intervals. prEN 13402-4, Size designation of clothes - Part 4: Coding system. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest b

14、y September 2002, and conflicting national standards shall be withdrawn at the latest by September 2002. According to the CENKENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic,

15、Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. I nt rod u cti on Different sizing systems in Europe mean that different clothing size designations in use in European countries ca

16、n fit persons with identical or almost identical body measurements. This European Standard is a reference document for a standardized European size designation system for different types of garment. 3 EN 13402-212002 (E) 1 Scope This European Standard specifies primary and secondary dimensions for s

17、pecified types of garments to be used in combination with EN 13402-1. The primary aim of this European Standard is the establishment of a size designation system that can be used by manufacturers and retailers to indicate to consumers (in a simple, direct and meaningful manner) the body dimensions o

18、f the person that the garment is intended to fit. Provided the size of the persons body (as indicated by the specified dimensions) has been determined, in accordance with EN 13402-1 this designation system will facilitate the choice of garments that fit. The size designation system is based on body

19、and not on garment measurements. Choice of garment measurements is normally determined by the designer and the manufacturer who will make appropriate allowances to accommodate the type, position of wear, style, cut and fashion elements of the garment. 2 Normative references This European Standard in

20、corporates by dated or undated reference provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this Eu

21、ropean standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). EN 13402-1 :2001, Size designation of clothes - Terms, definitions and body measurement procedure (IS0 3635: 1981 modified).

22、 3 Terms and definitions For the purposes of this European Standard, the following terms and definitions apply. 3.1 primary dimension those body measurement, in centimetres, that shall be used to designate the size of a garment for the consumer EN 13402-11 3.2 secondary dimension those body measurem

23、ent, in centimetres - or in the case of pantyhose, body mass (kg) -that may additionally be used to designate the size of a garment for the consumer EN 13402-11 3.3 cup size the difference between the underbust girth and the bust girth 4 Definition of primary and secondary dimensions in garments Pri

24、mary and secondary dimensions are defined as shown in Table 1. These body measurements provide the basis for the designation of clothing sizes, independently from the product itself, for garment types as diverse as jackets, skirts, underwear, corsetry and head wear. Body measurements are listed sepa

25、rately for mens, womens, boys and girls clothing. For infants, only the body height is used as primary dimension, see EN 13402-1:2001, 3.13. The primary dimension will constitute the basic size designation system. 4 EN 13402-212002 (E) The heights and girths are measured in accordance with EN 13402-

26、1. The primary dimension will constitute the basic size designation system. A number of the secondary dimensions, as given in Table 1, may be used in such a designation system The following example explains how to use the table: The relevant indication of a jacket shall be designated by the chest gi

27、rth, indicated on a pictogram. Waist girth and/or body height may be given as further optional measurements. Shoe size is a code based on the foot length in cm. Hand size is a code based on the hand girth in cm (see EN 13402-1). 5 EN 13402-212002 (E) Dimensions 1. Outer garments Jackets suits Overco

28、ats Trousers/shorts Table 1 - Pri PDa SDb Chest girth Height Chest girth Height Waist girth Inside leg lengthf Chest girth Height Waist girth Height Inside leg lengthf Waist girth ary and secondary din Bust girth Bust girth Bust girth Waist girth Waist girth Bust girth Bust girth ensions in garments

29、 Height Hip girth Height Hip girth Height Height Hip girth Inside leg lengthf Height Hip girth Height Hip girth Waist girthf Height Knits: Cardigans, sweaters, T-shirts Shirts Blouses 2. Underwear Vest Underpants Pyjamas Ladies nightdresses Chest girth Height Neck girth Height Arm length - - Chest g

30、irth Height Waist girth Height Chest girth Height Waist girth Bust girth Height Bust girth Waist girth Bust girth Bust girth Height Height Hip girth Height Waist girthf Hip girth Heightf Hip girth Underbust girth Underbust girth Bust girth Underbust girth Bust girth Waist girth Hip girth Height Foot

31、 length Cup sizec Height Hip girth Waist girth Height Waist girth Weight - Foot length Hand girth Head girth - Foot length - - Hand girth - - Head girth - Garments for I Men Women Bovs I G PD I SD PD I SD I PD SD Height I Chest girth I Height Bust girth Height Chest girth Height Bust girth Bust girt

32、h Waist girth Height Height Chest girth Waist girth Height Height Skirts l- I- Waist girth Bust girth I I Dresses I- l- Height I Chest girth I Height Bust girth I -I- Height Neck girth Height Bust girth Height Height Height Bust girth Waist girth Bust girth Height Chest girth Waist girth Height Unde

33、rbust girth Bust girth bodies Chest girth I 3. Corsetry BL_ Underbust girth Cup size Corsetry/upper and full body I-l- I I I Corsetry/lower body 4. Pantyhose -1-1-1- I - I Height Height I- 5. Stockings 1-1- Foot length I - I Foot length I - 6. Socks Foot lengthd 7. Gloves Hand irthe 8. Head wear a P

34、D: Primary dimension b SD: Secondary dimension c Definition: see clause 3 d Foot lengthlshoe size e Handsize I/ Head girth Foot length Hand girth Head girth f Dimension not used for coding 6 BS EN 13402-212002 BSI 389 Chiswick High Road Lon don w4 4AL BSI is the independent national body responsible

35、 for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Re vi si ons British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendmen

36、ts or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found

37、 on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standard

38、s publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: orders&-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of t

39、hose that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information serv

40、ices are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 71 11. Fax: +44 (0)20 8996 7048. Email: infomi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purcha

41、se price of standards. For details ofthese and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 700 1. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further in

42、formation about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, ofthe publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988

43、no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means - electronic, photocopying, recording or otherwise -without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, ofnecessary details su

44、ch as symbols, and size, type or grade designations. Ifthese details are to be used for any other purpose than implementation then the prior written permission ofBSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyright&-.