EN 81714-3-2001 en Design of Graphical Symbols for Use in the Technical Documentation of Products Part 3 Classification of Connect Nodes Networks and Their Encoding《产品技术文件用图形符号的设计 .pdf

1、BRITISH STANDARD Design of graphical symbols for use in the technical documentation of products Part 3: Classification of connect nodes, networks and their encoding The European Standard EN 81714-3:2001 has the status ofa British Standard ICs 01.080.40; 01.110 BS EN IEC 8 17 14-3 12001 8 17 14-31 19

2、98 Incorporating Corrigendum No. I Wk present to the responsible European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. - A list of organizations repre

3、sented on this committee can be obtained on request to its secretary. From 1 January 1997, all IEC publications have the number 60000 added to the old number. For instance, IEC 27-1 has been renumbered as IEC 60027-1. For a periodoftime during the change over from one numbering systems to the other,

4、 publications may contain identifiers from both systems. Cr oss-r e fer enc e s The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Ind

5、ex”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself c

6、onfer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 9, and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. O BSI 6 December 200 1 ISBN O 580 38

7、462 4 EUROPEAN STANDARD EN 81714-3 NORME EUROPENNE EUROPISCHE NORM June 2001 ICs 01.080.50 English version Design of graphical symbols for use in the technical documentation of prod u c ts Part 3: Classification of connect nodes, networks and their encoding (I EC 8 1 7 1 4-31 1 998) Cration de symbo

8、les graphiques utilisables dans la documentation technique de produits Partie 3: Classification des noeuds de connexion des rseaux et leur codage (CE1 81714-311998) Codierung Gestaltung von graphischen Symbolen zur Anwendung in der technischen Prod u ktdo ku mentation Teil 3: Klassifikation von Ansc

9、hlupunkten, Netzwerken und ihre (IEC 81714-311998) This European Standard was approved by CENELEC on 2000-08-01. CENELEC members are bound to comply with the CENKENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any

10、 alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made

11、 by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany

12、, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secret

13、ariat: rue de Stassart 35, B - 1050 Brussels O 2001 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 81714-3:2001 E Page 2 EN 81714-32001 Foreword The text of the International Standard IEC 81714-3:1998, prepared by SC 3B, Document

14、ation, of IEC TC 3, Documentation and graphical symbols, was submitted to the Unique Acceptance Procedure and was approved by CENELEC as EN 81 714-3 on 2000-08-01 without any modification. The following dates were fixed: - latest date by which the EN has to be implemented at national level by public

15、ation of an identical national standard or by endorsement - latest date by which the national standards conflicting with the EN have to be withdrawn (dop) 2001-12-01 (dow) 2003-08-01 Endorsement not i ce The text of the International Standard IEC 81714-3:1998 was approved by CENELEC as a European St

16、andard without any modification. 4 O BSI 6 December 2001 Clause Page 3 EN 81714-3:2001 CONTENTS 1 Scope 2 Definitions 3 Classification of connect nodes and their encoding 4 Classification of networks Annex A (informative) Bibliography Annex B (informative) Data element type specification O BSI 6 Dec

17、ember 2001 Page 5 Page 4 EN 81714-32001 DESIGN OF GRAPHICAL SYMBOLS FOR USE IN THE TECHNICAL Part 3: Classification of connect nodes, networks and their encoding DOCUMENTATION OF PRODUCTS - 1 Scope This part of International Standard 81 714 specifies primarily requirements concerning the classificat

18、ion of connect nodes assigned to graphical symbols, being a representation of functional and product concepts. Due to the strong interrelation between the product and its corresponding graphical representation, identical classification principles are applied for both the classification of connect no

19、des of products as well as for the classification of networks and their representation by graphical symbols in computer-aided systems. 2 Definitions For the purpose of this part the following definitions apply. 2.1 connect node; port; terminal: Point of access of an object intended for connection. N

20、OTE - The connection may refer to a) or material flow path; a physical interface among conductors and/or contacts, or piping and/or duct systems to provide a signal or energy b) information. an association of functional nature established among logical elements, software modules, etc. for conveying

21、2.2 (schematic) connect node: Location on a graphical symbol intended for connection. NOTES 1 (Schematic) connect nodes represent the terminals of the object of interest 2 a graphical symbol. A (schematic) connect node may not have a graphical shape. It may consist of an imaginary point associated w

22、ith 2.3 connect-node code: Code of the type of connect node associated with an object. 2.4 network code: Code of the type of network interrelating connect nodes. 3 For the purpose of classification of connect nodes the following main classes are defined and encoded as shown below. Classification of

23、connect nodes and their encoding B Magnetism E Electricity F Functional G Acoustics 6 H Heat L Linkage (mechanical) M Matter (material) O BSI 6 December 2001 Page 5 EN 81714-32001 O Light and related electromagnetic radiations X Ionizing radiations Further letters are reserved for future standardiza

24、tion. The class matter (M) may be subclassified as follows: ML Liquid (matter) MG Gaseous (matter) MS Solid (matter) The main classes and subclasses may, if needed and appropriate, be further subclassified as follows, being preceded by the letter code of its higher-level class: . D Directed . G Guid

25、ed . N Non-restricted Typical examples for a connect node, directed: MLD = connection to a high pressure fluid material beam in a numerically controlled tool; OD Typical examples for a connect node, guided: = connection to a laser beam. MSG = connection to a solid material transporting piping system

26、; OG = connection to an optical fibre system; EG Typical example for a connect node, non-restricted: = connection to an electric cable. ON = connection to a lamp or light emitting diode. NOTES 1 Connect nodes of the functional class F will not be found on a physical product. On a graphical symbol, a

27、 functional connect node may be found alone, identifying an access point to a functional symbol without any specific implementation means. For examples see IEC 81714-2. I 2 class are used to show functional relations among different graphical symbol occurrences in a diagram. The class linkage L is u

28、sed for classification of connect nodes of graphical symbols. Connect nodes of the linkage 4 Classification of networks Connect nodes on products are either virtually or physically connected to other products via a connection network. Due to the strong interrelation between the classification of net

29、works and the classification of connect nodes, occurring networks shall be also classified as in clause 3. Figures in square brackets refer to the bibliography given in annex A O BSI 6 December 2001 7 Page 6 EN 81714-32001 Annex A (informative) Bibliography I IEC 81714-2: 1998, Design of graphical s

30、ymbols for use in the technical documentation of products- Part 2: Specification for graphical symbols in a computer sensible form, including graphical symbols for a reference library, and requirements for their interchange 2 IEC 61 360-1 : 1995, Standard data element types with associated classific

31、ation scheme for electric components - Part I: Definitions - Principles and methods 3 TR IEC 61 360-3: 1995, Standard data element types with associated classification scheme for electric components - Part 3: Maintenance and validation procedures 4 IEC 61 360-4: 1997, Standard data element types wit

32、h associated classification scheme for electric components - Part 4: IEC reference collection of standard data element types, component classes and terms 8 O BSI 6 December 2001 Page 7 EN 81714-32001 Annex B (informative) Data element type specification This annex contains the data element type spec

33、ifications associated with the objects dealt with in this standard. The data element types specified herein are intended for inclusion in the reference collection of IEC 613604 4. This annex facilitates therefore the application for new data element types as well as their maintenance. It is based on

34、 the requirements set up in IEC 61360-1 2 and IEC 61360-3 3. NOTES 1 element types (DET) are listed in the English version only. 2 613604, at which time a DET identifier will be allocated which can be used in referring to them. According to IEC 61360-3, the reference collection will be available in

35、the English language. Therefore data These definitions are in accordance with IEC 61360-1. They will be submitted for registration and inclusion in IEC B-I AAF391 Code of the type of connect node associated with an object Preferred na m exon nect-nod e cod e N (. .3 B E F G H L M O X ML MG MS BD ED

36、GD HD LD MD Magnetism Electricity Functional Acoustics Heat Linkage (mechanical) Matter (material) Light and related electromagnetic radiations Ionizing radiations Liquid (matter) Gaseous (matter) Solid (matter) Magnetism, directed Electricity, directed Acoustics, directed Heat, directed Linkage (me

37、chanical), directed Matter (material), directed O BSI 6 December 2001 9 Page 8 EN 81714-32001 OD = XD = MLD = MGD = MSD = BG = EG = GG = HG = LG = MG = OG = XG = MLG = MGG = MSG = BN = EN = GN = HN = LN = MN = ON = XN = MLN = MGN = MSN = Light and related electromagnetic radiations, directed Ionizin

38、g radiations, directed Liquid (matter), directed Gaseous (matter), directed Solid (matter), directed Magnetism, guided Electricity, guided Acoustics, guided Heat, guided Linkage (mechanical), guided Matter (material), guided Light and related electromagnetic radiations, guided Ionizing radiations, g

39、uided Liquid (matter), guided Gaseous (matter), guided Solid (matter), guided Magnetism, non-restricted Electricity, non-restricted Acoustics, non-restricted Heat, non-restricted Linkage (mechanical), non-restricted Matter (material), non-restricted Light and related electromagnetic radiations, non-

40、restricted Ionizing radiations, non-restricted Liquid (matter), non-restricted Gaseous (matter), non-restricted Solid (matter), non-restricted IEC 81 714-3 lEC 81714-3 B-2 Code of the type of network N (. .3 B = Magnetism E = Electricity F = Functional G = Acoustics H = Heat 10 O BSI 6 December 2001

41、 Page 9 EN 81714-32001 L= M= o= x= ML = MG = MS = BD = ED = GD = HD = LD = MD = OD = XD = MLD = MGD = MSD = BG = EG = GG = HG = LG = MG = OG = XG = MLG = MGG = MSG = BN = EN = GN = HN = LN = MN = ON = XN = MLN = MGN = MSN = Linkage (mechanical) Matter (material) Light and related electromagnetic rad

42、iations Ionizing radiations Liquid (matter) Gaseous (matter) Solid (matter) Magnetism, directed Electricity, directed Acoustics, directed Heat, directed Linkage (mechanical), directed Matter (material), directed Light and related electromagnetic radiations, directed Ionizing radiations, directed Liq

43、uid (matter), directed Gaseous (matter), directed Solid (matter), directed Magnetism, guided Electricity, guided Acoustics, guided Heat, guided Linkage (mechanical), guided Matter (material), guided Light and related electromagnetic radiations, guided Ionizing radiations, guided Liquid (matter), gui

44、ded Gaseous (matter), guided Solid (matter), guided Magnetism, non-restricted Electricity, non-restricted Acoustics, non-restricted Heat, non-restricted Linkage (mechanical), non-restricted Matter (material), non-restricted Light and related electromagnetic radiations, non-restricted Ionizing radiat

45、ions, non-restricted Liquid (matter), non-restricted Gaseous (matter), non-restricted Solid (matter), non-restricted IEC 81 714-3 lEC 81714-3 O BSI 6 December 2001 11 BS EN IEC 8 17 14-3 1200 1 8 1714-3: 1998 BSI 389 Chiswick High Road Lon don w4 4AL BSI is the independent national body responsible

46、for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Re vi si ons British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendment

47、s or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found

48、on the inside front cover. Tel: 020 8996 9000. Fax: 020 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publication

49、s should be addressed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information