ETSI EN 300 052-5-1998 Integrated Services Digital Network (ISDN) Multiple Subscriber Number (MSN) Supplementary Service Digital Subscriber Signalling System No One (DSS1) Protocol.pdf

1、 STD-ETSI EN 300 052-5-ENGL 1998 3400855 0308433 954 D EN 300 052-5 VI .2.4 (1998-06) European Standard (Telecommunications series) Integrated Services Digital Network (ISDN); Multiple Subscriber Number (MSN) supplementary service; Digital Subscriber Signalling System No. one (DSSI) protocol; Part 5

2、: Test Suite Structure and Test Purposes (TSS Essential, orpotentially Essential, IPRs not$ed to ETSI in respect of ETSI standards“, which is available free of charge from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/www.etsi.fr/ipr or http:/www.etsi.org/ipr). Pur

3、suant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in SR O00 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present documen

4、t. Fore wo rd This European Standard (Telecommunications series) has been produced by ETSI Technical Committee Signalling Protocols and Switching (SPS). The present document is part 5 of a multi-part standard covering the Digital Subscriber Signalling System No. one (DSS 1) protocol specification fo

5、r the Integrated Services Digital Network (ISDN) Multiple Subscriber Number (MSN) supplementary service, as described below: Part 1 : “Protocol specification“; Part 2: Part 3: Part 4: “Protocol implementation Conformance Statement (PICS) proforma specification“; “Test Suite Structure and Test Purpos

6、es (TSS “Abstract Test Suite (ATS) and partial Protocol Implementation extra Information for Testing (PIXIT) proforma specification for the user“; “Test Suite Structure and Test Purposes (TSS “Abstract Test Suite (ATS) and partial Protocol Implementation extra Information for Testing (PIXIT) proform

7、a specification for the network“. Part 5: Part 6: The present version updates the references to the basic call specifications. National transposition dates Date of adoption of this EN: Date of latest announcement of this EN (doa): 19 June 1998 30 September 1998 Date of latest publication of new Nati

8、onal Standard or endorsement of this EN (dop/e): 31 March 1999 I Date of withdrawal of any conflicting National Standard (dow): 31 March 1999 ETSI STD-ETSI EN 300 052-5-ENGL L998 m 3400855 0308437 5TT m 5 EN 300 052-5 V1.2.4 (1 998-06) This fth part of EN 300 052 specifies the Test Suite Structure a

9、nd Test Purposes (TSS or all versions up to and including the identified version (idenflied by “up to and including“ before the version identity); or all versions subsequent to and including the identified version (identifed by “onwards“ following the version identity); or publications without menti

10、on of a specific version, in which case the latest version applies. A non-specific reference to an ETS shall also be taken to refer to later versions published as an EN with the same number. 111 EN 300 052-1 (V1.2): “Integrated Services Digital Network (ISDN); Multiple Subscriber Number (MSN) supple

11、mentary service; Digital Subscriber Signalling System No. one (DSS 1) protocol; Part 1: Protocol specification“. EN 300 052-2 (V1.2): “Integrated Services Digital Network (ISDN); Multiple Subscriber Number (MSN) supplementary service; Digital Subscriber Signalling System No. one (DSS 1) protocol; Pa

12、rt 2: Protocol implementation Conformance Statement (PICS) proforma specification“. ISO/iEC 9646-1: “Information technology - OS1 Conformance Testing Methodology and Framework; Part 1: General Concepts“. ISOILEC 9646-2: “Information technology - OS1 Conformance Testing Methodology and Framework; Par

13、t 2: Abstract Test Suite specification“. ISOIIEC 9646-3: “Information technology - OS1 Conformance Testing Methodology and Framework; Part 3: The Tree and Tabular Combined Notation“. ITU-T Recommendation 1.41 1 (1993): “1SDN user-network interfaces - Reference configurations“. EN 300 403-1: “Integra

14、ted Services Digital Network (ISDN); Digital Subscriber Signalling System No. one (DSSI) protocol; Signalling network layer for circuit-mode basic call control; Part 1: Protocol specification LITU-T Recommendation 4.931 (1993), modified“. ITU-T Recommendation I. 112: “Vocabulary and terms for 1SDNs“

15、. CCITT Recommendation E.164: “Numbering plan for the ISDN era“. IT-T Recommendation 1.210: “Principles of the telecommunication services supported by an ISDN and the means to describe them“. 121 131 141 151 161 171 I81 Pl 1101 ETSI 6 EN 300 052-5 V1.2.4 (199846) 3 Definit ions For the purposes of t

16、he present document, the following definitions apply: 3.1 Definitions related to conformance testing abstract test case: Refer to ISO/IEC 9646-1 131. Abstract Test Suite (ATS): Refer to ISOAEC 9646-1 3. active test: A test case where the IUT is required to send a particular message, but not in react

17、ion to a received message. This would usually involve the use of PIXIT information to see how this message can be generated and quite often is specified in an ATS using an implicit send event. Implementation Under Test (IUT): Refer to ISO/IEC 9646- 1 3. implicit send event: Refer to ISO/EC 9646-3 15

18、1. lower tester: Refer to ISO/IEC 9646-1 3. passive test: A test case where the IUT is required to respond to a protocol event (e.g. received message) with another protocol event (e.g. send message) which normally does not require any special operator intervention as associated with the implicit sen

19、d event. point of control and observation: Refer to ISO/IEC 9646- 1 131. Protocol Implementation Conformance Statement (PICS): Refer to ISO/IEC 9646- 1 3. PICS proforma: Refer to ISO/IEC 9646-1 3. Protocol Implementation Extra Information For Testing (PIXIT): Refer to ISO/IEC 9646-1 3. PIXIT proform

20、a: Refer to ISO/IEC 9646-1 3. system under test: Refer to ISO/iEC 9646-1 131. Test Purpose (TP): Refer to ISO/IEC 9646-1 131. 3.2 Definitions related to EN 300 052-1 Integrated Services Digital Network (ISDN): See ITU-T Recommendation 1.112 181, definition 308. ISDN number: A number conforming to th

21、e numbering and structure specified in CC1lT Recommendation E. 164 SI. international number: An ISDN number structured as specified in subclause 3.2 (in the paragraphs relating to international number) of CCIT Recommendation E.164 9. multiple subscriber number: An ISDN number as part of a set of ISD

22、N numbers assigned to a user which shall be either the whole ISDN number or a part of the ISDN number including only the MSN significant digits (the least significant “n“ digit(s) where “n“ may be a number up to the full length of the ISDN number) and shall be a number large enough to allow all term

23、inals on an access to be assigned an individual number. national number; national significant number: An ISDN number structured as specified in subclause 3.2 (in the paragraphs relating to national significant number) of CCITT Recommendation E164 SI. network The DSSl protocol entity at the Network s

24、ide of the user-network interface where a T reference point or coincident S and T reference point applies. network (S/T): The DSS 1 protocol entity at the Network side of the user-network interface where a coincident S and T reference point applies. 7 EN 300 052-5 V1.2.4 (1 998-06) network (T): The

25、DSS 1 protocol entity at the Network side of the user-network interface where a T reference point applies (Network connected to Pnvate ISDN). service; telecommunication service: See ITU-T Recommendation 1.112 8, definition 201. subscriber number: An ISDN number structured as specified in subclause 3

26、.2 (in the paragraphs relating to subscriber number) of CCITT Recommendation E.164 SI. supplementary service: See ITU-T Recommendation 1.210 lo, subclause 2.4. 4 Abbreviations For the purposes of the present document, the following abbreviations apply: ATM ATS ISDN IUT MSN NO0 NO6 PICS PNIT TON TP T

27、SS Abstract Test Method Abstmct Test Suite Integrated Services Digital Network Implementation Under Test Multiple Subscriber Number Null call state Call Present call state Protocol Implementation Conformance Statement Protocol Implementation extra Information for Testing Type Of Number Test Purpose

28、Test Suite Smcture 5 Test Suite Structure (TSS) MSN - Network , Called use; interface (01) Calling usei interface (02) NOTE: Numbers in brackets represent group numbers and are used in TP identifiers. Figure 1 : Test suite structure 6 Test Purposes (TP) 6.1 I nt rod uction For each test requirement

29、a TP is defined. 6.1.1 TP naming convention The TPs are numbered, starting at 001, within each group. Groups are organized according to the TSS. Additional references are added to identify the actual test suite and whether it applies to the network or the user (see table 1). ETSI STDmETSI EN 300 052

30、-5-ENGL I998 m 3400855 0308440 094 m TP part Text Header tab CR. Ensure that the IUT in the Stimulus 8 EN 300 052-5 V1.2.4 (1 998-06) Example see table 1 subclause 0.0.0 mandatory, optional Table 1: TP identifier naming convention scheme Identifier: _ cssz = supplementary service: e.g. “MSN“ = type

31、of IUT: U User = group ann = sequential number (001 -999) N Network 2 digit field representing group reference according to TSS Reaction 6.1.2 Source of TP definition The TPs are based on EN 300 052-1 111. 6.1.3 TP structure Each TP has been written in a manner which is consistent with all other TPs

32、. The intention of this is to make the TPs more readable and checkable. A particular stnicture has been used and this is illustrated in table 2. This table should be read in conjunction with any TP Le. use a TP as an example to fully understand the table. or cqoab to request a . sends, saves, does,

33、etc. cmnditions using en bloc sending, . if the action is sending cnext action, etc. and enters andorand remains in the same state) see below for message structure Table 2: Structure of a single TP structure message containing a a) information element with b) a cfield name encoded as orincluding and

34、 back to a orb, Bearer capability, Facility, . see below for message structure NOO, N10, etc. receiving a XXXX message I orand enters state with CR Message I SETUP, FACILITY, CONNECT, . 6.1.4 Test strategy As the base standard EN 300 052-1 i contains no explicit requirements for testing, the TPs wer

35、e generated as a result of an analysis of the base standard and the PICS specification EN 300 052-2 121. The criteria applied include the following: - - only the requirements from the point of view of the T or coincident S and T reference point are considered; whether or not a test case can be built

36、 from the TP is not considered. ETSI 9 6.1.5 Test of call states EN 300 052-5 V1.2.4 (1 998-06) Many TPs include a reference to the IUTs final call state after the realization of the TP. In these cases the TP includes the requirement to ensure that the IUT has entered this particular final call stat

37、e. Ensuring that the IUT is in a particular call state shall be realized by following the procedures described in subclause 5.8.10 of EN 300 403-1 7. According to these procedures, the IUT on receipt of a STATUS ENQUIRY message, shail respond with a STATUS message indicating, in the third octet of t

38、he Call state information element, the current call state of the IUT. This exchange of messages is not mentioned explicitly in each TP but is considered to be implicit in the reference to the final call state. This way of phrasing the TPs has been used to avoid over-complicating the text and structu

39、re of the TPs and to improve the readability. 6.2 Network TPs for MSN Ali PICS items referred to in this subclause are as specified in EN 300 052-2 2 unless indicated otherwise by another numbered reference. 6.2.1 Called user interface MSN-Nol-001 subclause 9.2.1 optional Ensure that the IUT in the

40、Null call state N00, to indicate an incoming call and only the partial ISDN number is available, sends a SETUP message with a Called party number information element with type of number coded as “unknown“, numbering pian identification field coded as “unknown“ or as “ISDNltelephony numbering pian“,

41、and MSN digits and enters state NO6. Selection: IUT supports insertion of partial ISDN number in Called party number information element. PICS: SC 3.2. MSN-Nol-002 subclause 9.2.1 optional Ensure that the IUT in the Null call state NOO, to indicate an incoming call and the full ISDN number is availa

42、ble, sends a SETLJP message with a Called party number information element with type of number coded as “subscriber number“, “national number“ or “international number“ and numbering plan identification field coded as “unknown“ or as “LSDNltelephony numbering plan“, and the fuli ISDN number includin

43、g MSN digits and enters state N. Selection: IUT supports insertion of full ISDN number in Called party number information element. PICS: SC 3.1. 6.2.2 Calling user interface MSN-NO2001 subclause 9.3.2 mandatory Ensure that the LUT in the NuU call state NOO, to indicate that a SETUP message with a Ca

44、liiig party number infomation element with fewer digits than is required to uniquely identify one ISDN number from the set of ISDN numbers at the access has been received, discards the Calling party number information element (resulting in the sending of a SETUP message to the calied user either wit

45、hout the Calling party number information element or containing a Calling party number information element with different number digits than that received at the interface of the calling user) and continues normal call handling. ETSI 10 EN 300 052-5 V1.2.4 (1 99806) 7 Compliance An ATS which complie

46、s with this TSS b) use a TSS which is an appropriate subset of the whole of the TSS specified in clause 5; c) use the same naming conventions for the test groups and test cases; d) maintain the relationship specified in clause 6 between the test groups and TPs and the entries in the PICS proforma to

47、 be used for test case deselection; e) comply with ISOfiEC 9646-2 141. In the case of a) orb) above, a subset shall be used only where a particular Abstract Test Method (ATM) makes some TPs untestable. All testable TPs from clause 6 shall be included in a compliant ATS. 8 Requirements for a comprehe

48、nsive testing service As a minimum the Remote test method, as specified in ISOIiEC 9646-2 4, shall be used by any organization claiming to provide a comprehensive testing service for network equipment claiming conformance to EN 300 052-1 i. ETSI STD=ETSI EN 300 052-5-ENGL 1998 m 3400855 0308443 8T3

49、m 11 EN 300 052-5 V1.2.4 (1 998-06) Annex A (informative): Changes with respect to the previous ETS 300 052-5 The following changes have been done: - conversion to EN layout; - - replacement of references to ETS 300 102 with EN 300 403; substitution of non-specific references to basic standards where the intention is to refer to the latest version. 12 EN 300 052-5 V1 2.4 (199846) Edition 1 V1.2.3 History May 1997 Publication as ETS 300 052-5 February 1998 One-step Approval Procedure OAP 9824: 1998-02-13 to 1998-06-12 Do