ETSI EN 301 598-2014 White Space Devices (WSD) Wireless Access Systems operating in the 470 MHz to 790 MHz TV broadcast band Harmonized EN covering the essential requirements of ar.pdf

1、 ETSI EN 301 598 V1.1.1 (2014-04) White Space Devices (WSD); Wireless Access Systems operating in the 470 MHz to 790 MHz TV broadcast band; Harmonized EN covering the essential requirements of article 3.2 of the R Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standard

2、s“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/ipr.etsi.org). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referen

3、ced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonized European Standard (EN) has been produced by ETSI Technical Committee Broadband Radio Access Networks (BRAN). The present document has been p

4、roduced by ETSI in response to mandates M/284 and M/512 issued from the European Commission under Directive 98/34/EC i.1 as amended by Directive 98/48/EC i.2. The title and reference to the present document are intended to be included in the publication in the Official Journal of the European Union

5、of titles and references of Harmonized Standard under the Directive 1999/5/EC i.3. See article 5.1 of Directive 1999/5/EC i.3 for information on presumption of conformity and Harmonized Standards or parts thereof the references of which have been published in the Official Journal of the European Uni

6、on. The requirements relevant to Directive 1999/5/EC i.3 are summarized in annex A. National transposition dates Date of adoption of this EN: 21 April 2014 Date of latest announcement of this EN (doa): 31 July 2014 Date of latest publication of new National Standard or endorsement of this EN (dop/e)

7、: 31 January 2015 Date of withdrawal of any conflicting National Standard (dow): 31 January 2016 Introduction The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to cover all radio and telecommunications terminal equipment within the sco

8、pe of the R Uncertainties in the measurement of mobile radio equipment characteristics; Part 1“. 3 ETSI TR 100 028-2 (V1.4.1) (12-2001): “Electromagnetic compatibility and Radio spectrum Matters (ERM); Uncertainties in the measurement of mobile radio equipment characteristics; Part 2“. 4 IETF RFC 41

9、22 (05-2007): “A Universally Unique IDentifier (UUID) URN Namespace“. NOTE: Available at http:/www.ietf.org/rfc/rfc4122.txt. ETSI ETSI EN 301 598 V1.1.1 (2014-04) 92.2 Informative references The following referenced documents are not necessary for the application of the present document but they ass

10、ist the user with regard to a particular subject area. i.1 Directive 98/34/EC of the European Parliament and of the Council of 22 June 1998 laying down a procedure for the provision of information in the field of technical standards and regulations and of rules on Information Society services. i.2 D

11、irective 98/48/EC of the European Parliament and of the Council of 20 July 1998 amending Directive 98/34/EC laying down a procedure for the provision of information in the field of technical standards and regulations. i.3 Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1

12、999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity (R A guide to the production of Harmonized Standards for application under the R Improvement on Radiated Methods of Measurement (using test site) and evaluation of the corresponding measur

13、ement uncertainties; Part 2: Anechoic chamber“. i.7 ETSI TR 102 273-3: “Electromagnetic compatibility and Radio spectrum Matters (ERM); Improvement on Radiated Methods of Measurement (using test site) and evaluation of the corresponding measurement uncertainties; Part 3: Anechoic chamber with a grou

14、nd plane“. i.8 ETSI TR 102 273-4: “Electromagnetic compatibility and Radio spectrum Matters (ERM); Improvement on Radiated Methods of Measurement (using test site) and evaluation of the corresponding measurement uncertainties; Part 4: Open area test site“. i.9 ETSI TR 103 231: “White Space Devices (

15、WSD); Wireless Access Systems operating in the 470 MHz to 790 MHz TV broadcast band; Information on weblistings of TV White Space Databases (TVWSDBs)“. i.10 ECC Report 159: “Technical and operational requirements for the possible operation of cognitive radio systems in the “white spaces“ of the freq

16、uency band 470-790 MHz“, January 2011. i.11 Dynamic White Space Spectrum Access; By William Webb and contributors. NOTE: Available at http:/www.webbsearch.co.uk/publications/. 3 Definitions, symbols and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions

17、 given in ECC Report 159 i.10 and the following apply: Adjacent Channel Leakage Ratio (ACLR): ratio of the in-band transmit power measured in an 8 MHz TV channel, to the out-of-band emission measured in 100 kHz in an adjacent TV channel altitude: height above the reference level defined by WGS84 ass

18、ociation: process whereby a slave TVWSD provides its device parameters to a master TVWSD and initially identifies itself to its serving master TVWSD Authentication: ability to verify the identity of a server, and that a message was truly sent by the asserted sender ETSI ETSI EN 301 598 V1.1.1 (2014-

19、04) 10channel usage parameters: parameters sent by a TVWSD to inform the TVWSDB of the actual radio resources that will be used by both the master and the slave TVWSDs dedicated antenna: removable antenna supplied and assessed with the radio equipment, designed as an indispensable part of the equipm

20、ent device emission class: classification declared by the manufacturer that identifies the level of ACLR for the device device parameters: parameters that specify the technical characteristics of an individual TVWSD, and its location Digital Terrestrial Television (DTT): platform for the delivery of

21、 digital TV content via terrestrial broadcasting DTT channel: 8 MHz channel in accordance with the European harmonized DTT channel raster external antenna: removable antenna which is designed for use with a broad range of radio equipment and has not be designed for use with a specific product NOTE:

22、An external antenna is not assessed together with the equipment against the requirements of the present document. generic operational parameters: transmission parameters communicated by a master TVWSD to any slave TVWSD within the coverage area of that master TVWSD to allow the slave TVWSD to operat

23、e as required geographic validity: geographic area within which the operational parameters for a geo-located TVWSD are valid geo-location capability: capability of a TVWSD to determine and report the latitude, longitude and altitude coordinates of its antenna geo-location uncertainty: 3D position er

24、ror defined by the difference in metres between the point reported by the TVWSD device to the TVWSDB and the actual position of the TVWSD antenna horizontal geo-location capability: capability of a TVWSD to determine and report the latitude and longitude coordinates of its antenna in-block emissions

25、: intended emissions that fall within a single or multiple DTT channel(s) integral antenna: antenna designed as a fixed part of the equipment, without the use of an external connector, which cannot be disconnected from the equipment by a user with the intent to connect another antenna NOTE: An integ

26、ral antenna may be fitted internally or externally. In the case where the antenna is external, a non-detachable cable can be used. Integrity: capability to protect messages against accidental or malicious changes during transit master operational parameters: transmission parameters communicated from

27、 a TVWSDB to a master TVWSD to allow the master TVWSD to operate as required master TVWSD: geo-located TVWSD that is able to communicate directly with a TVWSDB and with TVWSDs out-of-block emissions: unwanted emissions that fall within the 470 MHz to 790 MHz band regulatory domains: geographical are

28、a where a set of regulatory rules applies NOTE: This is normally a country. reverse intermodulation attenuation: measure of the capability of the transmitter to inhibit the generation of intermodulation signals in its non-linear components caused by the presence of the transmitter wanted signal and

29、an unwanted signal reaching the transmitter via the antenna reverse intermodulation attenuation improvement: measure of the improvement in reverse intermodulation attenuation beyond the minimum value required, as a function of in-block transmitter power slave operational parameters: transmission par

30、ameters communicated from a TVWSDB via a master TVWSD to enable a slave TVWSD to operate as required slave TVWSD: TVWSD that is only able to communicate with other TVWSDs, when under the control of a master TVWSD ETSI ETSI EN 301 598 V1.1.1 (2014-04) 11sleep mode: mode of operation for which the TVW

31、SD is inactive but is not powered-down specific operation parameters: transmission parameters communicated from a TVWSDB to a specific TVWSD (master or slave), taking account of the device parameters of that specific TVWSD test equipment: equipment that provides the means to operate and control a UU

32、T for the purposes of testing against the requirements contained in the present document test master TVWSD: test equipment that emulates the functionalities of a master TVWSD for the purposes of testing a slave TVWSD against the requirements contained in the present document test slave TVWSD: test e

33、quipment that emulates the functionalities of a slave TVWSD for the purposes of testing a master TVWSD against the requirements contained in the present document test white space database: test equipment that emulates the functionalities of a TVWSDB for the purposes of testing a TVWSD against the re

34、quirements contained in the present document time validity: period of time when a set of operational parameters is valid, determined by the TValStartand TValEndparameters contained in the said operational parameter set TV white spaces: frequencies within the 470 MHz to 790 MHz band which have been i

35、dentified by a TVWSDB for use by a TVWSD TV White Space Database (TVWSDB): database system approved by the relevant national regulatory authority which can communicate with TVWSDs and provide information on TV white space availability TV White Space Device (TVWSD): TVWSD controlled by a TVWSDB and w

36、hich operates in TV white spaces UHF TV band: 470 MHz to 790 MHz band NOTE: This corresponds to DTT channels 21 to 60. vertical geo-location capability: capability of a TVWSD to determine and report the altitude of its antenna weblisting: publically available Internet listing of approved TVWSDB(s) r

37、elevant to a regulatory domain, and which is hosted by, or on behalf of the national regulatory authority for that regulatory domain 3.2 Symbols For the purposes of the present document, the following symbols apply: AchNumber of active transmit chains dB decibel dBc decibel relative to carrier dBm d

38、ecibel relative to 1 milliwatt f Frequency of measurementfcCentre frequency of the assigned channel fl,iFrequency at the lower edge of the ithchannel fu,i Frequency at the upper edge of the ithchannel fun Centre frequency of the unwanted signal fwCentre frequency of the wanted signal P0,iMaximum mea

39、n EIRP in a given (ith)100 kHz channel P1,iMaximum mean EIRP in a given (ith) 8 MHz channel PIBMeasured in block EIRP spectral density over 8 MHz PIBkAn intermediate (kth) value of PIBPIBMaxMaximum value of PIBPIM3 Power of the third order intermodulation product at frequency (2 fw- fun), measured i

40、n a 100 kHz bandwidth POOBMean out of block EIRP spectral density p0, iIn-block EIRP spectral density (dBm/100 kHz) which a TVWSD intends to use within each DTT channel p1, i In-block EIRP which a TVWSD intends to use within each (8 MHz) DTT channel RIM3 third order reverse intermodulation attenuati

41、on RIM3 Improvement in the third order reverse intermodulation attenuation (RIM3) ETSI ETSI EN 301 598 V1.1.1 (2014-04) 12TDurTime duration of the operational parameters TValEnd Absolute time of the end of the period of validity of the operational parameters TValStartAbsolute time of the start of th

42、e period of validity of the operational parameters 3.3 Abbreviations For the purposes of the present document, the following abbreviations apply: AC Alternating Current ACLR Adjacent Channel Leakage Ratio BW Bandwidth DC Direct Current DHCP Dynamic Host Configuration Protocol DNS Domain Name System

43、DTT Digital Terrestrial Television EIRP Equivalent Isotropically Radiated Power FAR Fully Anechoic Room GHz GigaHertz GNSS Global Navigation Satellite System IEEE Institute of Electrical and Electronics Engineers IETF Internet Engineering Task Force IP Internet Protocol LPDA Logarithmic Periodic Dip

44、ole Antenna MAC Media Access Control MHz MegaHertz OATS Open Area Test Site OUI Organizationally Unique Identifier R prevent a slave TVWSD from transmitting in the absence of communications with a master TVWSD; require a master TVWSD or a slave TVWSD to transmit in accordance with instructions and p

45、arameters provided by approved TVWSDBs; prevent a master TVWSD from getting parameters from an TVWSDB that is not approved by the relevant national authority. NOTE: The protocol used for data transfer between slave TVWSDs, master TVWSDs and TVWSDB are outside the scope of the present document. 4.2.6

46、.1 TVWSDB identification 4.2.6.1.1 Definition This is the process by which the master TVWSD identifies the weblisting of approved TVWSDB(s), and only contacts a TVWSDB which is in that weblisting. ETSI ETSI EN 301 598 V1.1.1 (2014-04) 174.2.6.1.2 Applicability These requirements apply to a Master TV

47、WSD only. 4.2.6.1.3 Requirements At start up and before initiating any transmissions within the 470 MHz to 790 MHz band the master TVWSD shall identify and consult the weblisting. The master TVWSD shall not transmit within the 470 MHz to 790 MHz band if it cannot consult the weblisting. The master T

48、VWSD shall also reconsult this weblisting after no more than N minutes. The value N will be specified in the same weblisting as the approved TVWSDBs. A master TVWSD shall not request operational parameters from (i.e. query) a TVWSDB that is not on the weblisting that corresponds to its geographical

49、location. NOTE: A non-exhaustive list of these weblistings is given in TR 103 231 i.9. If the weblisting is not accessible after the time specified by N has expired, the TVWSD shall: a) continue to use the weblisting that it already holds; and b) try to reconsult the weblisting at least as frequently as once every two hours thereafter but not more frequently than once per hour until such time as when the weblisting can be accessed. 4.2.6.1.4 Conformance Conformance tests as defined in clause 5.3.11.1 shall be carried out. 4.2.6.2 Data exchange and