ETSI TS 136 455-2016 LTE Evolved Universal Terrestrial Radio Access (E-UTRA) LTE Positioning Protocol A (LPPa) (V13 1 0 3GPP TS 36 455 version 13 1 0 Release 13)《长期演进技术(LTE) 演进型通用陆.pdf

1、 ETSI TS 1Evolved Universal TLTE Positi(3GPP TS 36.4TECHNICAL SPECIFICATION136 455 V13.1.0 (2016LTE; l Terrestrial Radio Access (E-itioning Protocol A (LPPa) .455 version 13.1.0 Release 1316-05) UTRA); 13) ETSI ETSI TS 136 455 V13.1.0 (2016-05)13GPP TS 36.455 version 13.1.0 Release 13Reference RTS/T

2、SGR-0336455vd10 Keywords LTE ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present docume

3、nt can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case

4、 of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the documen

5、t may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https:/port

6、al.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modifi

7、ed without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of

8、 its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 136 455 V13.1.0 (2016-05)23GPP TS 36.455 version 13.1.0 Release 13Int

9、ellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Ri

10、ghts (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches,

11、has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by

12、ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GS

13、M, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/queryform.asp. Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of th

14、e ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 136 455 V13.1.0 (2016-05)33GPP TS 36.455 version 13.1.0 Release 13Contents Intellectual Property Rights 2g3Foreword . 2g

15、3Modal verbs terminology 2g3Foreword . 6g31 Scope 7g32 References 7g33 Definitions, symbols and abbreviations . 7g33.1 Definitions 7g33.2 Symbols 8g33.3 Abbreviations . 8g34 General . 8g34.1 Procedure specification principles 8g34.2 Forwards and backwards compatibility 9g34.3 Specification notations

16、 . 9g35 LPPa services . 9g35.1 LPPa procedure modules 9g35.2 Parallel transactions 9g36 Services expected from lower layer . 10g37 Functions of LPPa 10g38 LPPa procedures . 10g38.1 Elementary procedures . 10g38.2 Location Information Transfer Procedures . 11g38.2.1 E-CID Measurement Initiation . 11g

17、38.2.1.1 General 11g38.2.1.2 Successful Operation . 11g38.2.1.3 Unsuccessful Operation 12g38.2.1.4 Abnormal Conditions 12g38.2.2 E-CID Measurement Failure Indication 12g38.2.2.1 General 12g38.2.2.2 Successful Operation . 12g38.2.2.3 Unsuccessful Operation 12g38.2.2.4 Abnormal Conditions 12g38.2.3 E-

18、CID Measurement Report . 13g38.2.3.1 General 13g38.2.3.2 Successful Operation . 13g38.2.3.3 Unsuccessful Operation 13g38.2.3.4 Abnormal Conditions 13g38.2.4 E-CID Measurement Termination 13g38.2.4.1 General 13g38.2.4.2 Successful Operation . 14g38.2.4.3 Unsuccessful Operation 14g38.2.4.4 Abnormal Co

19、nditions 14g38.2.5 OTDOA Information Exchange 14g38.2.5.1 General 14g38.2.5.2 Successful Operation . 14g38.2.5.3 Unsuccessful Operation 15g38.2.5.4 Abnormal Conditions 15g38.2.6 UTDOA Information Exchange 15g38.2.6.1 General 15g38.2.6.2 Successful Operation . 15g3ETSI ETSI TS 136 455 V13.1.0 (2016-0

20、5)43GPP TS 36.455 version 13.1.0 Release 138.2.6.3 Unsuccessful Operation 16g38.2.6.4 Abnormal Conditions 16g38.2.7 UTDOA Information Update 16g38.2.7.1 General 16g38.2.7.2 Successful Operation . 16g38.2.7.3 Unsuccessful Operation 16g38.2.7.4 Abnormal Conditions 17g38.3 Management Procedures 17g38.3

21、1 Error Indication . 17g38.3.1.1 General 17g38.3.1.2 Successful Operation . 17g38.3.1.3 Abnormal Conditions 17g39 Elements for LPPa Communication . 17g39.0 General . 17g39.1 Message Functional Definition and Content 18g39.1.1 Messages for Location Information Transfer Procedures . 18g39.1.1.1 E-CID

22、 MEASUREMENT INITIATION REQUEST . 18g39.1.1.2 E-CID MEASUREMENT INITIATION RESPONSE . 18g39.1.1.3 E-CID MEASUREMENT INITIATION FAILURE 19g39.1.1.4 E-CID MEASUREMENT FAILURE INDICATION . 19g39.1.1.5 E-CID MEASUREMENT REPORT 19g39.1.1.6 E-CID MEASUREMENT TERMINATION COMMAND 20g39.1.1.7 OTDOA INFORMATI

23、ON REQUEST . 20g39.1.1.8 OTDOA INFORMATION RESPONSE . 20g39.1.1.9 OTDOA INFORMATION FAILURE 21g39.1.1.10 UTDOA INFORMATION REQUEST . 21g39.1.1.11 UTDOA INFORMATION RESPONSE . 21g39.1.1.12 UTDOA INFORMATION FAILURE 21g39.1.1.13 UTDOA INFORMATION UPDATE . 22g39.1.2 Messages for Management Procedures .

24、 22g39.1.2.1 ERROR INDICATION . 22g39.2 Information Element definitions . 22g39.2.0 General 22g39.2.1 Cause 22g39.2.2 Criticality Diagnostics 24g39.2.3 Message Type . 24g39.2.4 LPPa Transaction ID . 25g39.2.5 E-CID Measurement Result 25g39.2.6 ECGI . 26g39.2.7 OTDOA Cell Information . 26g39.2.8 E-UT

25、RAN Access Point Position . 27g39.2.9 PRS Muting Configuration . 28g39.2.10 Requested SRS Transmission Characteristics . 29g39.2.11 UL Configuration 29g39.2.12 Cell Portion ID 31g39.2.13 Inter-RAT Measurement Result 31g39.3 Message and Information Element Abstract Syntax (with ASN.1) 33g39.3.1 Gener

26、al 33g39.3.2 Usage of Private Message Mechanism for Non-standard Use 33g39.3.3 Elementary Procedure Definitions 33g39.3.4 PDU Definitions . 37g39.3.5 Information Element definitions . 44g39.3.6 Common definitions . 54g39.3.7 Constant definitions 55g39.3.8 Container definitions. 56g39.4 Message trans

27、fer syntax . 61g39.5 Timers 61g310 Handling of unknown, unforeseen and erroneous protocol data 61g3Annex A (informative): Change History 62g3ETSI ETSI TS 136 455 V13.1.0 (2016-05)53GPP TS 36.455 version 13.1.0 Release 13History 63g3ETSI ETSI TS 136 455 V13.1.0 (2016-05)63GPP TS 36.455 version 13.1.0

28、 Release 13Foreword This Technical Specification has been produced by the 3rdGeneration Partnership Project (3GPP). The contents of the present document are subject to continuing work within the TSG and may change following formal TSG approval. Should the TSG modify the contents of the present docum

29、ent, it will be re-released by the TSG with an identifying change of release date and an increase in version number as follows: Version x.y.z where: x the first digit: 1 presented to TSG for information; 2 presented to TSG for approval; 3 or greater indicates TSG approved document under change contr

30、ol. y the second digit is incremented for all changes of substance, i.e. technical enhancements, corrections, updates, etc. z the third digit is incremented when editorial only changes have been incorporated in the document. ETSI ETSI TS 136 455 V13.1.0 (2016-05)73GPP TS 36.455 version 13.1.0 Releas

31、e 131 Scope The present document specifies the control plane radio network layer signalling procedures between eNB and E-SMLC. LPPa supports the concerned functions by signalling procedures defined in this document. LPPa is developed in accordance with the general principles stated in TS 36.401 2. 2

32、 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. - References are either specific (identified by date of publication, edition number, version number, etc.) or non-specific. - For a specific reference, subsequ

33、ent revisions do not apply. - For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP document (including a GSM document), a non-specific reference implicitly refers to the latest version of that document in the same Release as the present document. 1 3GPP TR 2

34、1.905: “Vocabulary for 3GPP Specifications“. 2 3GPP TS 36.401: “Evolved Universal Terrestrial Radio Access Network (E-UTRAN); Architecture Description“. 3 3GPP TS 36.413: “Evolved Universal Terrestrial Radio Access Network (E-UTRAN); S1 Application Protocol (S1AP)“. 4 ITU-T Recommendation X.691 (200

35、2-07): “Information technology - ASN.1 encoding rules - Specification of Packed Encoding Rules (PER) “. 5 3GPP TS 36.104: “Evolved Universal Terrestrial Radio Access Network (E-UTRAN); Base Station (BS) radio transmission and reception“. 6 3GPP TS 36.211: “Evolved Universal Terrestrial Radio Access

36、Network (E-UTRAN); Physical Channels and Modulation“. 7 3GPP TS 23.032: “Technical Specification Group Services and System Aspects; Universal Geographical Area Description (GAD)“. 8 3GPP TS 36.133: “Evolved Universal Terrestrial Radio Access (E-UTRA); Requirements for support of radio resource manag

37、ement“. 9 3GPP TR 25.921 (version.7.0.0): “Guidelines and principles for protocol description and error handling“. 3 Definitions, symbols and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in TR 21.905 1 and the following apply. A term defined

38、 in the present document takes precedence over the definition of the same term, if any, in TR 21.905 1. Elementary Procedure: LPPa protocol consists of Elementary Procedures (EPs). An LPPa Elementary Procedure is a unit of interaction between the eNB and the E-SMLC. An EP consists of an initiating m

39、essage and possibly a response message. Two kinds of EPs are used: - Class 1: Elementary Procedures with response (success or failure), ETSI ETSI TS 136 455 V13.1.0 (2016-05)83GPP TS 36.455 version 13.1.0 Release 13- Class 2: Elementary Procedures without response. Cell Portion: A geographical part

40、of a cell. A cell portion is semi-static, and identical for both the UL and the DL. Within a cell, a cell portion is uniquely identified by its Cell Portion ID. 3.2 Symbols For the purposes of the present document, the following symbols apply: 3.3 Abbreviations For the purposes of the present docume

41、nt, the abbreviations given in TR 21.905 1 and the following apply. An abbreviation defined in the present document takes precedence over the definition of the same abbreviation, if any, in TR 21.905 1. CID Cell-ID (positioning method) DL Downlink E-CID Enhanced Cell-ID (positioning method) eNB E-UT

42、RAN NodeB EP Elementary Procedure EPC Evolved Packet Core E-SMLC Evolved Serving Mobile Location Centre E-UTRAN Evolved UTRAN IE Information ElementLCS LoCation Services LPP LTE Positioning Protocol LPPa LTE Positioning Protocol Annex MME Mobility Management Entity NW Network OTDOA Observed Time Dif

43、ference of Arrival S1AP S1 Application Protocol SRS Sounding Reference Signal UE User Equipment UL Uplink UTDOA Uplink Time Difference of Arrival 4 General 4.1 Procedure specification principles The principle for specifying the procedure logic is to specify the functional behaviour of the terminatin

44、g eNB exactly and completely. Any rule that specifies the behaviour of the originating eNB shall be possible to be verified with information that is visible within the system. The following specification principles have been applied for the procedure text in clause 8: - The procedure text discrimina

45、tes between: 1) Functionality which “shall“ be executed The procedure text indicates that the receiving node “shall“ perform a certain function Y under a certain condition. If the receiving node supports procedure X but cannot perform functionality Y requested in the initiating message of a Class 1

46、EP, the receiving node shall respond with the message used to report unsuccessful outcome for this procedure, containing an appropriate cause value. 2) Functionality which “shall, if supported“ be executed ETSI ETSI TS 136 455 V13.1.0 (2016-05)93GPP TS 36.455 version 13.1.0 Release 13The procedure t

47、ext indicates that the receiving node “shall, if supported,“ perform a certain function Y under a certain condition. If the receiving node supports procedure X, but does not support functionality Y, the receiving node shall proceed with the execution of the EP, possibly informing the requesting node

48、 about the not supported functionality. - Any required inclusion of an optional IE in a response message is explicitly indicated in the procedure text. If the procedure text does not explicitly indicate that an optional IE shall be included in a response message, the optional IE shall not be include

49、d. For requirements on including Criticality Diagnostics IE, see section 10. 4.2 Forwards and backwards compatibility The forwards and backwards compatibility of the protocol is assured by a mechanism where all current and future messages, and IEs or groups of related IEs, include ID and criticality fields that are coded in a standard format that will not be changed in the future. These parts can always be decoded regardless of the standard version. 4.3 Specification notations For the purposes of the present document, the following notations apply: