FORD B-3-2005 DRAWING TITLES (Version 28).pdf

1、 FECDS B-3 Engineering CAD & Drafting Standards Ford Proprietary and/or Confidential Information - Do not distribute to others w/o prior written authorization. Version 28 TOC Original Issue: 19960419 Copyright, Ford Motor Company. Latest Re-issue: 20051231B31 Printed copies are uncontrolled.DRAWING

2、TITLES 1 INTRODUCTION 1.1 Proper nomenclature facilitates part name indexing and parts list compilation, expedites locating the part and aids in ascertaining the function of the part. 2 DEFINITIONS (Reserved) 3 REQUIREMENTS 3.1 ALLOCATION 3.1.1 Program and Pre-Production Management (PPM) is responsi

3、ble for assigning base part numbers and names for released Product Engineering drawings. Materials Engineering Testing and Standards (MET&S) is responsible for assigning Standard/Utility part numbers and names for released Product Engineering drawings. See FAP03-117. 3.1.2 For Part Numbers not alrea

4、dy in the WERS database the Design Responsible Engineering Activities will submit a request for Basic Part Numbers/Names using this website: https:/ 3.2 PRODUCT DRAWING TITLES 3.2.1 Part Titles are assigned by Program and Pre-Production Management (PPM). The drawing title is to be stated exactly as

5、it is listed within the Base Part Number Database located at https:/ after performing a search for the specific base part number. Part Titles are not permitted to contain part usage, as WERS is the master for this information. Object drawing titles, data file naming and drawing file naming must be t

6、he identical, See PIM Yellowbook. 3.3 MANUFACTURING DRAWING TITLES 3.3.1 The drawing title area contained in the Drawing Title Block (see Standard A-1, item X) shall contain up to four (4) text lines. The first two (2) lines shall be used for the title of the drawing. The second two (2) lines should

7、 be used for the title of the sheet. 3.3.2 The title of the drawing and each sheet shall be concise and specific. Titles shall not limit usage based on location (site, operation etc.) or production parts being manufactured. 3.3.2.1 The title of the drawing shall name the process, tool or equipment r

8、elevant to the drawing. The title of the drawing shall be associated with each drawing sheet and shall not contain sheet specific information. Return to TOC ENGINEERING CAD & DRAFTING STANDARDS Original Issue: 19960419 Copyright, Ford Motor Company. Latest Re-issue: 20051231B32 Printed copies are un

9、controlled.3.3.2.2 The title of the sheet shall be associated with each sheet and shall contain only sheet specific information. 3.4 PRODUCT LAYOUT DRAWING TITLES 3.4.1 For product layout drawing titles, refer to Corporate Product Systems Classification (CPSC) Index contained in the Worldwide Integrated Standards for Engineering (WISE). 4 SPECIFICATIONS (Reserved) 5 ADDENDUM (Reserved)