FORD ESE-M4C9-B-2010 DIESEL FUEL GENERAL USAGE TO BE USED WITH FORD WSS-M99P1111-A 《通用柴油 与标准FORD WSS-M99P1111-A一起使用 列于标准FORD ESE-M4C8-E上［使用 FORD WSS-M4C132-A］》.pdf

1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2010 01 06 N-STATUS Replaced by WSS-M4C132-A D. DiGregorio, NA 2004 06 21 Revised Para 3.0 inserted; para 3.11 & 4 deleted 1994 07 25 Released NE01E10127076135 M. Riley Printed copies are uncontrolled Copyright 2010, Ford Global Technologies,

2、LLC Page 1 of 3 DIESEL FUEL, COLD WEATHER ESE-M4C8-E DIESEL FUEL, GENERAL USAGE ESE-M4C9-B NOT TO BE USED FOR NEW DESIGN 1. SCOPE The materials defined by these specifications are a refined, middle distillate, petroleum product. 2. APPLICATION These specifications were released originally for low su

3、lfur diesel fuels used in high speed automotive diesel engines, etc. 3. REQUIREMENTS This material must meet the low sulfur diesel fuel requirements of ASTM D 975 Standard Specification for Diesel Fuel Oils, plus the following 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and

4、 part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). ESE-M4C8-E ESE-M4C9-B Cold Weather General Usage 3.1 GRADE No. 1 No. 2 3.2 CETANE NUMBER, min 43 43 (ASTM D 613) 3.3 VISCOSITY at 40 C, mm2/s 1.4 - 2.2 2.2 - 3.8 (ASTM D 445) 3.4 CARBON RESI

5、DUE ON 10% 0.10 0.15 BOTTOMS, %, max (ASTM D 524) 3.5 COPPER STRIP TEST, max 1 2 (ASTM D 130, 3 h at 50 C) 3.6 DISTILLATION TEMPERATURES, C (ASTM D 86) (ASTM D 86) 3.6.1 90% Point 282, max 283 - 329 3.6.2 End Point, max 315 - ENGINEERING MATERIAL SPECIFICATIONESE-M4C8-E ESE-M4C9-BPrinted copies are

6、uncontrolled Copyright 2010, Ford Global Technologies, LLC Page 2 of 3 3.7 ODOR Shall have the usual characteristic odor of diesel fuel. 3.8 COLOR Bright and clear with no visible evidence of dye. 3.9 ADDITIVES May contain the following nonmetallic additives: anti-oxidant, lubricity, corrosion inhib

7、itor, dehazer, dispersant, dye, metal deactivator, pour point depressant, cetane improver, or biocide. 3.10 CERTIFICATION Supplier shall certify that the gasoline is a formula that has been tested and meets Ford Motor Company requirements as stated in this specification. Technical evidence of these

8、data and manufacturing limits must be tabulated on the attached form. This certification shall be by the suppliers Director of Research or other authorized official and submitted to the responsible Ford purchasing activity. This information will then be forwarded to the materials activity of the Eng

9、ine Product Engineering office or to the product engineering office responsible for source approval. 5. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 5.1 FLAMMABILITY This material represents a potentia

10、l fire hazard. The Manufacturing Engineering Department or other responsible activity shall notify both the Security and Safety Units of its presence to assure that proper fire precautions are provided. The location in which it is used or stored shall be included in the notifications. 5.2 SAMPLING A

11、ND SUBMISSION OF SAMPLES (ASTM D 4057) 5.3 QUALITY CONTROL Records must be made available to the responsible product engineering office upon request. ENGINEERING MATERIAL SPECIFICATIONESE-M4C8-E ESE-M4C9-BPrinted copies are uncontrolled Copyright 2010, Ford Global Technologies, LLC Page 3 of 3 Volat

12、ility Grade_ Date_ Company_ Refinery Location_ Specification_ Actual Test Results Manufacturing ASTM (Typical) Limits Cetane Number D 613 _ _ Cetane Index D 976 _ _ Cloud Point, C D 2500 _ _ Pour Point, C D 97 _ _ Viscosity at 40 C, mm2/s D 445 _ _ Water & Sediment, % D 1796 _ _ Ash Content, % D 482

13、 _ _ Carbon Residue on 10% D 524 _ _ Residuum, % Sulfur Content, % D 2622 _ _ Copper Corrosion D 130 _ _ Ferrous Corrosion D 665 _ _ Oxidation Stability, D 2274 _ _ mg/100 mL Distillation D 86 Initial Boiling Point, C _ _ 10% Evaporated, C _ _ 50% Evaporated, C _ _ 90% Evaporated, C _ _ End Point, C

14、 _ _ Recovery, % _ _ Residue, % _ _ Hydrocarbon Composition D 1319 Aromatics, % _ _ Olefins, % _ _ Saturates, % _ _ Hydrocarbon Ratio _ _ Electrical Conductivity D 2624 _ _ pS/m Flash Point, C D 93 _ _ Specific Gravity at 16 C D 1298 _ _ Additives Type and Formula Manufacturing Limts Antioxidant _ _ Antistatic Additive _ _ Cetane Improver _ _ Corrosion Inhibitor _ _ Dehazer _ _ Deicer _ _ Dispersant _ _ Exhaust Particulate Depressant _ _ Metal Deactivator _ _ Pour Depressant _ _ Wax Crystal Modifier _ _ Miscellaneous _ _ Signature_ Title_