FORD EW2-1-1995 HARD SERVICE CORD AND TYPE G POWER CABLE《重负荷电缆和“G”型电力电缆》.pdf

1、FORD MANUFACTURING STANDARDS _p_- - -c-s= EW2-1 HARD SERVICE CORD AND TYPE “G“ POWER CABLE EW2-1 DECEMBER 1995 Page 1 _ - - 1. SCOPE: 1.1 INCLUDED TYPES: 1.1.1 1 Cords and cables specified in this standard shall be UL Listed / or Recognized (or equivalent OSHA NRTL, agency certified) for use in the

2、USA, and/or CSA Certified for use in Canada and I shall be the mark of these agencies. They shall be suitable for “extra hard usage“ as specified in the National Electrical Code I (NEC), Table 400-4. These cords and cables shall also be water-, chemical- and oil- resistant types, and rated 600 Vat I

3、 as follows: I A. Type ST00 portable cord. I B. Types SOW-A, SOOW-A portable cords. C. Portable power cable, similar in construction to type G, having three power conductors and three grounding wires (which combined equal the cross-sectional area of a power conductor) laid between the conductors. In

4、sulation and jacket material shall be equivalent or better performance to types indicated in A or B above. 1.1.2 Unless otherwise specified, cord and cable shall be round. 1.2 NORMATIVE REFERENCES: 1.2.1 1 I Cord and cable described in this standard shall also meet applicable requirements outlined i

5、n the latest editions of the following standards: I A. ANSI/NFPA 70, “National Electrical Code“ (NEC) B. ANSI/UL 62, “Flexible Cord and Fixture Wire“ (Specific requirements type ST0 cord are listed in Table 3.14.) I ANSI/UL 82, “Thermoplastic - Insulated Wires and Cables“. ANSI/UL 1581, “Electrical

6、Wires, Cables, and Flexible Cords, Reference Standard for,“. C. ICEA S-61-402, “Thermoplastic Insulated Wire and Cable“, (Same as NERA WC-5). I D. CSA C22.2 No. 49, “Flexible Cords and Cables“. FORD MANUFACTURING STANDARDS - -E=- e-e- EW2-1 HARD SERVICE CORD AND TYPE “G“ POWER CABLE EW2-1 DECEMBER 1

7、995 Page 2 . - 2. APPLICATION: 2.1 I GENERAL: Cord and cable shall be suitable for heavy duty industrial service where continuous exposure to fluids, such as water, oil, I g rease, coolants and solvents, is encountered at temperatures up to 1 60 deg. C (140 deg. F); Shall also be suitable for other

8、uses from I -35 deg. C to at least 90 deg. C. 2.2 1 CORD: Types STOO, SOW-A, and SOOW-A portable cords shall be I suitable for wiring control devices on industrial equipment, such as I limit and pressure switches, solenoid valves, and similar apparatus 1 operated at nominal 115 Vat. The cord is also

9、 specified for 1 extension cords and lamps and related services (see Standard EW2). 2.3 I POWER CABLE: Power cable shall be used for wiring to motors and other apparatus operated at 240 and 480 Vat. The cable shall be available in conductor sizes AWG #14 thru #2. 3. REQUIREMENTS: 3.1 INSULATION AND

10、JACKET MATERIALS: The conductor insulation and the jacket shall consist of thermoplastic or thermoset material having water-, chemical- and oil- resistant properties. The jacket material shall comply with all requirements for Class II material as specified in UL 62. Rubber and rubber compounds are n

11、ot acceptable for insulation or jacket materials. 3.1.2 I Individual conductor insulation shall comply with UL 62 for I Extra Hard Service Cords. The thickness shall not be less than I specified in NEC Table 400-4. 3.2 COLOR: 3.2.1 I I I The insulation on each conductor of portable cord shall be per

12、manently colored per the Control Cable Conductor Color Code, Method 1 - Table K-l, and the color shall extend throughout the length and thickness of the material as follows: Three-Conductor - One each black, white, and green. Five-Conductor - One each black, white, red, orange, and green. I The gree

13、n insulation may include yellow tracer stripe(s). FORD MANUFACTURING STANDARDS - xi=-r-=-=-_ - -I=P=-s-rP-=-= EW2-1 HARD SERVICE CORD AND TYPE “G“ POWER CABLE EW2-1 DECEMBER 1995 Page 3 3.2.2 The insulation on conductors of power cable shall be permanently colored and the color shall extend througho

14、ut the length and thickness of the material as follows: Three-Conductor - One black, one white, and one red. The three grounding wires may be bare or have green insulation. I The green insulation may include yellow tracer stripe(s). 3.3 FILLERS AND BINDERS: 3.3.1 I Non-hygroscopic and non-wicking ma

15、terials shall be provided I where fillers are required. 3.3.2 1 I A non-wicking, full-serve binder shall be applied over the assembled conductors and shall consist of tape, braid, or a wrap of multiple strands of thread or a combination thereof. 3.4 CONDUCTORS: 3.4.1 1 I I Conductors shall be strand

16、ed copper, Class K or M, soft annealed per ASTM B-174. Stranding shall not be less than specified in the following table: Conductor Size AWG No. Number of Strands 18 16 16 26 14 41 12 65 10 105 8 168 6 266 4 420 2 665 Individual strand size for all conductors is AWG #30. For constant flexing service

17、, AWG #16 shall be furnished with 65 strands of #36. FORD MANUFACTURING STANDARDS EW2-1 HARD SERVICE CORD AND TYPE “G“ POWER CABLE EW2-1 DECEMBER 1995 Page 4 3.4.2 1 I / I Jacket thickness for cord and power cable shall not be less than specified in UL 62, Table 64.1. The following table lists minim

18、um jacket thickness for cord and cable covered by this standard. The column, “Number of Conductors“, includes the grounding wire(s). The three grounding wires in power cable are considered one conductor. Conductor Size Number of AWG No. Conductors Jacket Thickness Mils MM 18 - 16 2 -4 60 1.52 16 5 8

19、0 2.03 14 3 -4 80 2.03 12 - 10 3-4 95 2.41 8 4 125 3.18 6 4 140 3.56 4 4 155 3.94 2 4 170 4.32 4. IDENTIFICATION: 4.1 I HARD SERVICE CORD: Identification marking on portable cord and I power cables shall be durably marked on the surface at intervals I of 24 inches (61Omm) or less. Information shall

20、include the Type I designation, AWG size, Number of conductors, and manufacturers I name or mark, by permanent imprinting (embossing) on the surface of the sheath. The Underwriters Laboratory Listing or Recognition I symbol shall be shown on the cord or cable or on the spool, reel or 1 box. It may a

21、lso be shown on a tag attached to each coil. Tags or I labels shall contain the information required in 1 310-11(a). NEC Section- 4. 5. 2 1 POWER CABLE: Power cable shall be identified as I except it shall also be marked: THREE-CONDUCTOR I THREE GROUNDING WIRES. I TESTS: outlined in 4.1, AWG-WITH 5.

22、1 I Tests shall be conducted in accordance with UL 83 and UL 1581. 5.2 I Each insulated conductor in a length of completed cable shall with- I stand a 2kV alternating current test voltage for 1 minute. FORD MANUFACTURING STANDARDS -eE=-3y - - Ew2-1 HARD SERVICE CORD AND TYPE “G“ POWER CABLE iii7 DEC

23、EMBER 1995 Page 5 -pp 6. I APPROVAL OF NEW SOURCES: 6.1 I Materials supplied by new manufacturers to this standard shall have I laboratory and field trial approvals. 6.2 I Recommendation for inclusion of new manufacturers to the approved I listing shall be made in writing to the Electrical Standards

24、 Sub- I committee. All supporting data shall accompany the written request. 7. I MANUFACTURERS RESPONSIBILITY: Material supplied to this standard shall 1 be equivalent in all characteristics to the material upon which approval I was originally granted and shall be suitable for the intended I applica

25、tion. Any change subsequent to approval shall require re- I evaluation by the Electrical Standards Subcommittee. 8. I APPENDIX - GLOSSARY OF WIRE AND CABLE TYPES: 8.1 I Types covered by this standard: 1 so0 - Same as SO but with oil-resistant conductor insulation and I jacket. 1 SOOW-A- Same as SO0

26、but with weather and sunlight resistant jacket. I (“W-A“ designates UL Listing for weather resistance.) 1 sow - Same as SO but GSA Certified for water resistance. 1 SOW-A - Same as SO but with weather and sunlight resistant jacket. I (“W-A“ designates UL Listing for weather resistance.) 1 ST00 - Sam

27、e as ST0 but with oil-resistant conductor insulation and I jacket. 8.2 I Types included here for reference only: I so - Extra hard service cord, same construction as type S except I oil-resistant jacket, 6OOV, 60 deg. C to 105 deg. C. I ST - Extra hard service cord, jacketed same as S except all-pla

28、stic I construction, 600 V, 60 deg. C to 105 deg. C. 1 ST0 - Same as ST but with oil-resistant thermoplastic outer jacket, 1 6OOV, 60 deg. C. m 9009LbCl 0051b53 T7T W FORD MANUFACTURING STANDARDS EWZ-1 HARD SERVICE CORD AND TYPE “G“ POWER CABLE EW2-1 DECEMBER 1995 Page 6 1 SJ- Junior hard service, rubber-insulated, same construction as 1 type S, but 300 Volts. 1 SJO - Same as SJ, except oil-resistant outer jacket, 300 Volts. ; NOTE: Denotes area of change in previous issue. I