FORD WSE-M2C908-B-2013 OIL ENGINE ASSEMBLY FLUID TO BE USED WITH FORD WSS-M99P1111-A .pdf

1、 ENGINEERING MATERIAL SPECIFICATION Date Action Revisions Rev.01 2014 03 18 Revised See Summary C E Richardson, NA 2013 01 14 Activated C E Richardson, NA Controlled document at www.MATS Copyright 2014, Ford Global Technologies, LLC Page 1 of 2 OIL, ENGINE, SAE 50, ASSEMBLY FLUID WSE-M2C908-B 1. SCO

2、PE These material specifications define the minimum acceptable performance requirements and physical/chemical properties of engine oils to be used by Ford Motor Company in its worldwide engine/vehicle manufacturing operations. 2. APPLICATION This specification was released originally for an assembly

3、 fluid for pre-lubrication of components in spark ignition and compression ignition engines prior to assembly. 3. REQUIREMENTS 3.0 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99

4、P1111-A). 3.1 PERFORMANCE Shall meet or exceed requirements of API Service Categories CF or SJ. 3.2 VISCOSITY Shall meet all the requirements of SAE 50 viscosity grade as defined in SAE Standard J300 (latest revision), “Engine Oil Viscosity Classification“. 3.3 QUALIFICATION PROCEDURE It is the supp

5、liers responsibility to have the technical evidence and documentation certifying that a given formulation meets all requirements described in this specification. Upon request, supplier must furnish to Fuels and Lubricants Engineering data required to show compliance with this specification. Upon eng

6、ineering approval, supplier and Fuels and Lubricants Engineering shall establish mutually agreed upon quality control limits to be listed in Supplement. 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification.

7、Contact for questions concerning Engineering Material Specifications. 5. SUMMARY OF REVISIONS 2014 03 18 Add SAE 50 to title, Revised 3.1 Performance and 3.2 Viscosity Grade. Eliminated SAE 20W-50 Added Supplement ENGINEERING MATERIAL SPECIFICATION WSE-M2C908-B Copyright 2014, Ford Global Technolog

8、ies, LLC Page 2 of 2 Supplement Supplier _ Product Name _ Product Code _ _ Blend Plant _ Quality Control Certification Properties Limits Frequency Viscosity at 100 C _ _ Viscosity at 40 C _ _ Viscosity Index _ _ Specific gravity, 60 o F _ _ Pounds Per Gallon, 60 o F _ _ Pour Point, o C _ _ Flash Point, C _ _ Total Base Number, mg KOH/g _ _ Appearance _ _ Elemental Analysis, weight % Calcium _ _Phosphorus _ _ Zinc _ _ Date _ Signature_ Title _ Fuels and Lubricants Engr. concurrence _