FORD WSS-M11G22-A-2003 DECORATIVE WOOD VENEER CHERRY-PRUNUS AVIUM CROWN CUT TO BE USED WITH FORD WSS-M99P1111-A 《装饰性胶合板 弦锯樱桃 西洋樱桃木 (和FORD WSS-M99P1111-A一起使用)》.pdf

1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2003 10 13 Activated C. Bezant Printed copies are uncontrolled Copyright 2003, Ford Global Technologies, Inc. Page 1 of 1 DECORATIVE WOOD VENEER, CHERRY-PRUNUS AVIUM, CROWN CUT WSS-M11G22-A DECORATIVE WOOD VENEER, CHERRY-PRUNUS AVIUM, QUARTER

2、CUT WSS-M11G22-A2 1. SCOPE These specifications define wood veneers for use as decorative product on interior wood veneer assemblies. A = Cherry-Prunus Avium, Crown Cut A2 = Cherry-Prunus Avium, Quarter Cut 2. APPLICATION The specifications WSS-M1G22A/A2 were released for materials used for wooden d

3、ecorative automotive components. Application of lacquer and other products will need to be considered to provide a suitable finished product. 3. REQUIREMENTS Material specification requirements are to be used for initial qualification of materials. When in the fully assembled form the veneer assembl

4、y must perform to the Material specification requirements of WSS-M15P34-B1 or as specified on the engineering drawing. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A)

5、. 3.2 MATERIAL PROPERTIES 3.2.1 Appearance Colour, feature and grain to be as per Master samples 3.2.2 Thickness, nominal thickness 0.6mm 3.2.3 Moisture content 11 - 18% 3.2.4 Density A/A2 540 +/- 50 Kgm-33.3 PERFORMANCE PROPERTIES Veneer selected for its attractive appearance should be uniform in thickness, smooth, flat, free from decay and have face grain suitable for the intended face grade