FORD WSS-M1H1036-A-2006 FABRIC AIRFIELD PATTERN DOBBY WOVEN UNLAMINATED TO BE USED WITH FORD WSS-M99P1111-A 《飞机场图案不分层多臂提花机织织物 与标准FORD WSS-M99P1111-A一起使用 》.pdf

1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2006 12 11 Activated M. Montgomery Printed copies are uncontrolled Copyright 2006, Ford Global Technologies, LLC Page 1 of 2 FABRIC, AIRFIELD PATTERN, DOBBY WOVEN, WSS-M1H1036-A UNLAMINATED 1. SCOPE The material defined by this specification i

2、s a woven dobby polyester face fabric. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for use in the CD345 Titanium. 3. REQUIREMENTS In addition to the requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A2/A3/A4

3、as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 5% tolerance (ASTM D 3775) Warp 340 ends/10 cm Weft 23

4、0 picks/10 cm 3.2.2 Fabric Weight, +/- 30g/m tolerance (FLTM BN 106-01) 390 g/m23.3 COMPOSITION (ASTM D 629) Fabric 100% polyester 3.4 YARN CONSTRUCTION (ASTM D 1244) Warp dtex 710, (polyester) Weft dtex 550, (polyester) dtex 550 bright, (polyester) ENGINEERING MATERIAL SPECIFICATIONWSS-M1H1036-A Pr

5、inted copies are uncontrolled Copyright 2006, Ford Global Technologies, LLC Page 2 of 2 3.5 METHOD OF DYEING Yarn dyed or as approved by Materials Engineering 3.6 FINISHED OPERATIONS As approved by Materials Engineering 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase departments will ensure that both materials defined in this specification and shipped to any one assembly plant will be produced by one supplier only.