FORD WSS-M1H1036-A-2006 FABRIC AIRFIELD PATTERN DOBBY WOVEN UNLAMINATED TO BE USED WITH FORD WSS-M99P1111-A 《飞机场图案不分层多臂提花机织织物 与标准FORD WSS-M99P1111-A一起使用 》.pdf

上传人:priceawful190 文档编号:751720 上传时间:2019-01-14 格式:PDF 页数:2 大小:24.62KB
下载 相关 举报
FORD WSS-M1H1036-A-2006 FABRIC AIRFIELD PATTERN DOBBY WOVEN UNLAMINATED  TO BE USED WITH FORD WSS-M99P1111-A  《飞机场图案不分层多臂提花机织织物  与标准FORD WSS-M99P1111-A一起使用 》.pdf_第1页
第1页 / 共2页
FORD WSS-M1H1036-A-2006 FABRIC AIRFIELD PATTERN DOBBY WOVEN UNLAMINATED  TO BE USED WITH FORD WSS-M99P1111-A  《飞机场图案不分层多臂提花机织织物  与标准FORD WSS-M99P1111-A一起使用 》.pdf_第2页
第2页 / 共2页
亲,该文档总共2页,全部预览完了,如果喜欢就下载吧!
资源描述

1、 ENGINEERING MATERIAL SPECIFICATIONDate Action Revisions 2006 12 11 Activated M. Montgomery Printed copies are uncontrolled Copyright 2006, Ford Global Technologies, LLC Page 1 of 2 FABRIC, AIRFIELD PATTERN, DOBBY WOVEN, WSS-M1H1036-A UNLAMINATED 1. SCOPE The material defined by this specification i

2、s a woven dobby polyester face fabric. 2. APPLICATION This specification was released originally for material used as an interior trim fabric for use in the CD345 Titanium. 3. REQUIREMENTS In addition to the requirements listed herein, the fabric shall meet all requirements of WSS-M8P18-A1/A2/A3/A4

3、as applicable. 3.1 STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS Material suppliers and part producers must conform to the Companys Standard Requirements For Production Materials (WSS-M99P1111-A). 3.2 FABRIC CONSTRUCTION 3.2.1 Fabric Count, +/- 5% tolerance (ASTM D 3775) Warp 340 ends/10 cm Weft 23

4、0 picks/10 cm 3.2.2 Fabric Weight, +/- 30g/m tolerance (FLTM BN 106-01) 390 g/m23.3 COMPOSITION (ASTM D 629) Fabric 100% polyester 3.4 YARN CONSTRUCTION (ASTM D 1244) Warp dtex 710, (polyester) Weft dtex 550, (polyester) dtex 550 bright, (polyester) ENGINEERING MATERIAL SPECIFICATIONWSS-M1H1036-A Pr

5、inted copies are uncontrolled Copyright 2006, Ford Global Technologies, LLC Page 2 of 2 3.5 METHOD OF DYEING Yarn dyed or as approved by Materials Engineering 3.6 FINISHED OPERATIONS As approved by Materials Engineering 4. GENERAL INFORMATION The information given below is provided for clarification and assistance in meeting the requirements of this specification. 4.1 Purchase departments will ensure that both materials defined in this specification and shipped to any one assembly plant will be produced by one supplier only.

展开阅读全文
相关资源
猜你喜欢
相关搜索

当前位置:首页 > 标准规范 > 国际标准 > 其他

copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1