GMKOREA EDS-T-4520-2008 THE TEST PROCEDURE OF FORWARD LOADING STRENGTH FOR REAR SEAT CUSHION.pdf

1、GM DAEWOO Auto & Technology EDS Engineering, GM DAEWOO Auto & Technology Standards THE TEST PROCEDURE OF FORWARD LOADING STRENGTH FOR REAR SEAT CUSHION Do Not Use on New Programs. Being Replaced by GMW14607 EDS-T-4520 ISSUED DATE: 1998. 02. 26 REVISED DATE: 2008. 10. 15 VERSION: 3 (Superceded) EDS-T

2、-4520THE TEST PROCEDURE OF FORWARD LOADING STRENGTH FOR REAR SEAT CUSHION PAGE: 1/2 ISSUED DATE: 1998. 02. 26 REVISED DATE: 2008. 10. 15 VERSION: 3 GM DAEWOO Auto & Technology Note: This standard may be applied only for current project (incl. T255 Program). It is Superceded for all future projects a

3、nd replaced by GMW14607. 1. PURPOSE This procedure verifies the forward strength of the rear seat cushion stopper on the back against force from cargo loads upon rapid braking or frontal collision. 2. SCOPE All types of rear seats with foldable cushions and backs by employing cushion stopper functio

4、n 3. TEST SAMPLES Minimum three new assembled rear cushions 4. TEST EQUIPMENT AND JIG 4.1. Jig for fixing the rear cushions in actual field conditions, or those of BIW 4.2. Leveling surface table 4.3. Measuring instrument for loads The measuring instrument shall be capable of measuring the load with

5、 maximum resolution of 0.5 kgf. 4.4. Weight loading equipment Equipment capable of loading the weight greater than 500 kgf 4.5. Weight loading jig A rigid plate 100 mm thick and wider than the cushion 5. METHODS AND SPECIFICATIONS OF TEST 5.1. Preparation 5.1.1. Fit the cushion-fixing jig in an actu

6、al vehicle or on the leveling surface table, and then mount a cushion on the jig. 5.1.2. Fold the cushion, and install the weight loading equipment on the center of the weight-loading jig. 5.2. Test Method 5.2.1. Apply the load equivalent to cargo load x 0.6 kgf in speed of 300 mm/min on a position

7、as shown in fig. 1. 5.2.2. Remove the load, and check the cushion for any transformation. EDS-T-4520THE TEST PROCEDURE OF FORWARD LOADING STRENGTH FOR REAR SEAT CUSHION PAGE: 2/2 ISSUED DATE: 1998. 02. 26 REVISED DATE: 2008. 10. 15 VERSION: 3 GM DAEWOO Auto & Technology 5.3. Evaluation Neither the folding function, nor the fixture function shall not be impaired. Figure 1