HOLDEN HN 2166-2009 TAPE - NOISE CONTROL《胶带 噪音控制型》.pdf

1、ABN 84 006 893 232 GM Holden Limited Engineering Department MATERIAL SPECIFICATION NUMBER SHEET RELEASE REVISION : HN 2166 1 of 3 March, 1997 October 2009 NAME: TAPE - NOISE CONTROL THIS DOCUMENT MUST NOT BE REPRODUCED. IF USED IN RELATION TO THE COMPANYS PRODUCTS THE RECIPIENT IS RESPONSIBLE TO CON

2、FIRM THE DOCUMENT ISSUE DATE IS STILL VALID FORM : S:EngBusProcessEngMaterialsMatlsAndAppearanceNBRspecific0AdminMgmtStandardFormsMatspec.doc 1. SCOPE The material described in this specification is a tape designed to reduce noises created by adjacent parts rubbing against each other. The tape consi

3、sts of fibres, usually nylon or polyester, bound together to form a pad which is adhered to the part by a pressure sensitive adhesive. Type 1 has an acrylic pressure sensitive adhesive suitable for forming strong bonds to painted metal surfaces and most plastic materials except polyethylene and poly

4、propylene. Type 2 has a pressure sensitive adhesive suitable for bonding to polyethylene and polypropylene. 2. REQUIREMENTS 2.1 Shelf Life The material shall be satisfactory for use after ageing in the original container for 90 days at 35 C. 2.2 Thickness Material Thickness Fabric 0.4 - 0.8 mm Adhes

5、ive 0.07- 0.15 mm 2.3 Packaging Tape to be furnished in evenly and uniformly wound rolls on suitable cores with silicone treated paper on polyethylene release liner (if applicable), easily removable with no separation of the material. The silicone treated paper can be brown or white in colour 3. FUR

6、THER TESTING Other Tests may be required to validate the specific application. ABN 84 006 893 232 GM Holden Limited Engineering Department MATERIAL SPECIFICATION NUMBER SHEET RELEASE REVISION : HN 2166 2 of 3 March, 1997 October 2009 NAME: TAPE - NOISE CONTROL THIS DOCUMENT MUST NOT BE REPRODUCED. I

7、F USED IN RELATION TO THE COMPANYS PRODUCTS THE RECIPIENT IS RESPONSIBLE TO CONFIRM THE DOCUMENT ISSUE DATE IS STILL VALID FORM : S:EngBusProcessEngMaterialsMatlsAndAppearanceNBRspecific0AdminMgmtStandardFormsMatspec.doc 4. APPROVAL, INSPECTION AND REJECTION Refer HN 1000, Clauses A and C. 5. HAZARD

8、OUS MATERIALS Refer HN 1000, Clause H. 6. RESTRICTED AND REPORTABLE SUBSTANCES (i) All substances and parts must meet the compositional requirements of GMW3059. (ii) All chemical components present in materials supplied to this specification must comply with Australian NICNAS (National Industrial Ch

9、emicals Notification and Assessment Scheme) obligations. 7. APPROVED SUPPLIERS AND MATERIALS Material known to meet the full requirements of this specification: APPROVED MATERIAL APPROVED SUPPLIER Fabric Adhesive Type Cambrelle 468 Type 1 3M Company Proliner D5952 Type 1 Nitto Denko Proliner 5000NS

10、Type 2 Nitto Denko Cambrelle Y9485 Type 2 3M Company AS945T (conformable) Y9485 Type 2 3M Company Cambrelle D201 Type 2 Foam Sealant Pty Ltd 8. REFERENCES HN 1000 GMW3059 ABN 84 006 893 232 GM Holden Limited Engineering Department MATERIAL SPECIFICATION NUMBER SHEET RELEASE REVISION : HN 2166 3 of 3

11、 March, 1997 October 2009 NAME: TAPE - NOISE CONTROL THIS DOCUMENT MUST NOT BE REPRODUCED. IF USED IN RELATION TO THE COMPANYS PRODUCTS THE RECIPIENT IS RESPONSIBLE TO CONFIRM THE DOCUMENT ISSUE DATE IS STILL VALID FORM : S:EngBusProcessEngMaterialsMatlsAndAppearanceNBRspecific0AdminMgmtStandardForm

12、sMatspec.doc 9. REVISIONS January, 1998 - Approval of Brown and White Release Paper. July, 2000 - Editorial and Formatting corrections. - References section added. April, 2004 - Revised section 2.2. - Section 2.2(Construction) has been renamed Thickness. - The information from section 2.2.1(Total Th

13、ickness) and section 2.2.2(Anti Squeak Material) from the previous version of HN 2166 has been included into section 2.2(Thickness). - Also added thickness details for other approved material (AS945T). - Added another approved material (AS945T) to section 7(APPROVED SUPPLIERS AND MATERIALS). Novembe

14、r, 2006 - Section “2.REQUIREMENTS”, “2.2 Thickness” - altered “Material” and “Total Thickness” values -Revised section “6.RESTRICTED AND REPORTABLE SUBSTANCES” to directly reference GMW3059 and NICNAS requirements - Section “7.APPROVED SUPPLIERS AND MATERIALS” -added approved material September, 2008 - Section “7.APPROVED SUPPLIERS AND MATERIALS” -added approved material October, 2009 - Section “7.APPROVED SUPPLIERS AND MATERIALS” - added approved material, Proliner/5000NS Prepared by: Y. Zia