NAVY MIL-C-22954 B-1970 CONTROL RADIO SET C-1138 ( ) UR《C-1138 ( ) UR收音机控制器》.pdf

1、1 flIL-C-2275qB 58 7797706 0151715 0 / ._ MILITARY SPECIFICATION MIL-C-22954B(EC) 7 January 1970 SUPERSEDING MIL-C -22954A(SHIPS) 18 May 1962 CONTROL, RADIO SET C-1138( )/UR 1. SCOPE 1.1. This specification covers Control, Radio Set C-1138( )/UR which is intended to provide a means for remote contro

2、l of radiophone transmitting equipment used aboard all types and classes of Naval Ships. 2. APPLICABLE DOCUMENTS 2.1. The following documents of the issue in effect on the date of invitation for bids, form a part of this specification to the extent specified herein. I SPECIFICATIONS MILITARY I MIL-R

3、-19 MIL-R-26 MIL-T-27 MIL-C-62 MIL-R-94 MIL-R-94/5 MIL-S-901 MIL-C-915 MIL-C-2194 MIL -L -3 6 6 1 MIL-C-5015 MIL-R-5757 MIL-E-16400 - Electronic Equipment, Naval Ship and Shore; General Specification MIL-W-16878 - Wire Electrical (Insulated, High Temperature). MIL-E-17555 - Electronic and Electrical

4、 Equipment, Accessories, and Repair Parts, Packaging MIL-1-45208 - Inspection System Requirements - Resistor, Variable, Wirewound, (Low Operating Temperature), General Specifica- - Resistor, Fixed, Wirewound (Power Type). - Transformer and Inductor, (Audio, Power, and High Power Pulse), - Capacitor,

5、 Fixed, Electrolytic (DC, Aluminum Dry Electrolytic, Polarized), - Resistor, Variable, Composition, General Specification for - Resistors, Variable, Composition, Style RV4 - Shock Tests, H.I. (High-Impact) Shipboard Machinery, Equipment and Systems - Cable, Electrical, Special Purpose, General Speci

6、fication for - Cable, Power And Control, Reduced Diameter Types (Shipboard Use) - Lampholde r, Indicator Lights, Indicator-light Housings , And Indicator -light Lenses , - Connectors, Electric, “AN“ Type. - Relay Electrical, (for Electronic and Communication-Type-Equipment), General tion For. Genera

7、l Specification for MIL- 5-641 - Jack, Telephone, General Specification for - Requirements for General Specification for Specification for And Packing of STANDARDS I MILITARY MIL-STD-105 - Sampling Procedures and Tables for inspection by Attributes MIL-STD-108 - Definitions and Basic Requirements fo

8、r Enclosures for Electric and Electronic MIL-STD-242 - Electronic Equipment Parts (Selected Standards). MIL-STD-415 - Tests Points and Test Facilities for Electronic Systems and Associated Equipment MIL-STD-454 - Standard General Requirements For Electronic Equipment MS-3 102 MS-15567 Equipment. Des

9、ign Standard For. - Connector, Receptacle Electric, Box Mounting. - Lamp, incandescent, S-6 Bayonet Candelabra, Double Contact e- 2.“ : $: I - FSC 5820 P( Licensed by Information Handling Services(Copies of specifications, standards, drawings, and publications, required by suppliers in connection wi

10、th specific procurement functions shall be obtained from the procuring activity or as directed by the cdn- tracting officer.) 3. REQUIREMENTS 3.1 First article sample.- Prior to beginning production, a sample shall be tested as specified in 4.3 (see 6.2). 3.2 General requirement.- The equipment shal

11、l be in accordance with MIL-E-16400, as specified herein. Each control equipment shall be suitable for its intended purpose in the Naval communications services, when installed aboard Navy ships and when subjected to the adverse conditions normally encountered in ship- board service. 3.2.1. Material

12、.- All material used in the equipment shall be in accordance with MIL-E-16400 in the following areas, Unacceptable materials, Aluminum, Protection of aluminum and aluminum alloys. 3.2.2. All parts used in the equipment shall be in accordance with MIL-E-16400 in the areas that follow, Selection of pa

13、rts, Standard parts, Non-standard parts, Design application, Individual selection, Tolerances, Interchangeability, Identification (color) coding, Connectors general, Screw threads, Securing complete items, Material threaded devices, Thread projection, Nuts, Thread locking devices. 3.2.3 Test points

14、and test features.- Tests points shall be provided in accordance with the requirements of MIL-STD-415. 3.2.4 Tropica1ization.- Tropicalization of the complete control equipment or any part thereof, will not be required. 3.2.5 Blown fuse indicators.- Blown fuse-indicators are not required. 3.2.6 Temp

15、erature.- The equipment shall meet the temperature conditions of class 4 of MIL-E-16400. 3.2.7 Magnetic characteristics.- The equipment shall conform to the applicable requirements of MIL- E-I6400 for Magnetic characteristics. 3.2.8 Safety.- All safety shall be in accordance with requirement 1 of MI

16、L-STD-454. 3.3 Control knobs.- Tactile identification form for the control knobs is not required. The control knob for the earphone level control shall comply with MIL-STD-242. 3.4 Locking device.- A locking device shall be provided for earphone muting control, R-104 (see figure 2). This device shal

17、l be positive in action; the adjustment of the muting control shall not be altered when secured by the locking device; and the locking action shall not be abrogated when the equipment is subjected to shock or vibration. 3.5 Control circuit power.- Power for all relays, control circuits and indicatin

18、g lamps will be obtained from external power sources of 115/220 volts d.c. or 60 cycles, alternating current (a.C.) and 12 volts direct current (d.c.). The specified external power sources are expressed as nominal ratings. 3.6 Cabinet assembly.- The equipment shall be enclosed-in a cabinet assembly

19、provided with a cover hinged at the front bottom edge as depicted on figure 1. The cabinet shall be of aluminum construction, (see 3.2.). 3.6.1 Type of enclosure.- The cabinet assembly for the control equipment shall be totally enclosed in accordance with Table I of MIL-STD-108. 3.6.2 Mechanical des

20、ign.- The mechanical design of the equipment shall conform to MIL-E-16400. Licensed by Information Handling ServicesMIL-C-22754B 58 777770b 0353737 4 U MIL-C-229 54B( EC) .- . _ . _. - 3.6.3 Coating and treatments.- The painting of the enclosure shall conform to MIL-E-16400. The colors of the fasten

21、ers and assembly screws shall conform to MIL-E-16400. -. 3.6.4 Front panel.- The front panel shall be hinged to the bottom edge of the cabinet assembly with a continuous piano“ type hinge, and secured at each top corner with a captive thumb screw. The .heads of the thumb screws shall be slotted for

22、screwdriver tightening or loosening. The hinge pin shall be removable and shall be fabricated from noncorrosive material. The panel shall rotate 180 degrees for its fully open position. The front panel layout shall be as shown on figure 1. 3.6.4.1 The cabling from the front panel to the rear mounted

23、 terminal strips shall be laced, fanned and lugged to enable removal and replacement of the functional part of the equipment for maintenance in a mini- mum of time. 3.6.4.2 Hinge pin removal shall require no special tools. 3.6.5 Cable entrance.- Provision shall be made for the entry of external inte

24、rconnecting cables into any of the four sides (namely top, bottom and both end sides) of the cabinet assembly. Each of the specified sides shall be fitted with removable entry plates that shall individually be capable of accommodating fittings for se- curing one type MSCA-14 cable, in accordance wit

25、h MIL-C-2194, two type TTHFWA-l-1/2 cables and one type TTHEWA-3 cable in accordance with MIL-C-915. The entry plates shall be furnished undrilled for cable fittings. No fittings or cables shall be supplied by the manufacturer of the control equipment. 3.6.6 Internal wiring.- The internal wiring sha

26、ll be type C in accordance with MIL-W-16878. The “STAR-T-STOP“ circuits and keying circuits shall be wired with type C-16 wire. The remaining circuits shall be wired with type C-20 wire. 3.6.7 Terminal boards.- The terminal boards for the connection of external cables, shall be secured to the inside

27、 rear of the cabinet assembly and shall be conveniently accessible when the front panel is in its fully open position. Terminal boards shall conform.with the requirements of MIL-E-16400 and shall provide for the number of marked terminals, shown on figure 2. A separate terminal board bearing termina

28、ls 13 through 20 may be provided, (see figure 2). Terminals 1 through 12 (see figure 2) shall be of sufficient size as to in- dividually accommodate one conductor of a type MSCA cable in accordance with MIL-C-2194. Terminals 13, 141 19, 20, A, B, A, BI Cl D and E (see figure 2) shall be of sufficien

29、t size to individually accommodate one conductor of type TTHFWA cable in accordance with MIL-C-915. The spare terminal dimensions shall be ap- propriate to the foregoing cable conductors. 3.7 Overall dimensions: - Width - 8 inches Depth - 7; inches Height - 59 inches 3.8 Weight.- The weight of the e

30、quipment shall not exceed 10 pounds. 3.9 inclination, shock and vibration.- The control equipment shall be capable of withstanding inclination, shock and vibration as specified in MIL-E-16400 without the use of resilient mounts. 3.10 Parts requirements.- The component parts required for the control

31、equipment and specifically iden- tified herein, shall be selected in accordance with the requirements of 3.2.2 whenever such selection provides electrical and mechanical interchangeability with the individual parts covered by the referenced specifications in 3.10.1. 3.10.1 ,411 parts, except the ter

32、minal strips for external connections, shall be mounted on the front panel, either directly or on a chassis attached to the front panel. The arrangement and mounting of the parts shall afford accessibility for their individual inspection, maintenance, and replacement without damage to other parts wh

33、en the front panel is in its fully opened position. The control equipment shall include the following parts, wired and interconnected as shown on figure 2. 3 Licensed by Information Handling ServicesMIL-C-2275LlB 58 777770b 0151718 b MIL-C-22954B(EC) C-101 - Capacitor, fixed, plug-in electrolytic -

34、100 microfarads, 25 volts DCWV, in accord- 1-101 - Indicator lamp assembly with red jewel conforming to style LH80/1 in accordance ance with MIL-C-62. with MIL-L-3661. The indicator lamp shall be a 120 volt, 6 watt (nominal rating) in- candescent, candelabra base, Type s-6, with clear bulb, in accor

35、dance with RE-15567. cator lamp shall be a commercial type 1813, 12-18 volt, 0.1 ampere (nominal ratings) incandescent with miniature bayonet base and type T-3- 1 /4 clear bulb. 5-101 - Connector, receptacle, female 5-contact, in accordance with MS3102- 14S-5S, or or equivalent, as specified in MIL-

36、C-5015. 5-102 - Jack telephone; Material, finish and circuit equivalent to type JJ-O83 jack, in accord- ance with MIL-5-641. 5-103 - Jack, telephone; Switchcraft IJ1747A or equivalent, finish and circuitry in accordance with MIL- 5-641. 5-104 - Jack, telephone; Switchcraft IJ1747A or equivalent in a

37、ccordance with MIL- 5-641. K-101 - Relay 6 pole double throw, 12 volt, direct current (d.c.) 125 milliampere, maximum; capable of normal operation between 8.5 and 15 volts, d.c. contacts shal;. be capable of carrying 0.5 amperes 25 volts a.C. or d.c. This relay shall conform with the re- quirements

38、of MIL-R-5757 applicable to sealed enclosure. essary to reduce voltage to 1-101 to 115 volts, a.C. when the equipment is operating on 230 volts, a.C. Provisions shall be made for shorting this resistor out of the cir- cuit when the equipment is operated from 115 volts a.C., in accordance with MIL- 1

39、-102 - Indicator lamp assembly with green jewel, conforming with MIL-L-3661. The indi- R-101 - Resistor, fixed, wirewound, of resistance value and power dissipation ratings nec- . R-26. R-102 - Resistor, fixed, wirewound, 160 ohms I5 percent, 2 watts, secured with a metal R-103 - Resistor, variable,

40、 constant input impedance of 600 ohms, 1 watt, approximately uni- mounting clamp, in accordance with MIL-R-26. form attenuation per degree rotation, 40 decibels (db) attenuation range (nominal ratings) in accordance with MIL-R-19. vided, in accordance with MIL-R-94. ampere at 350 volts, 60 cycles a.

41、C. with a provision to prevent both operations si- multane ou sly. (rated;) secondary load 600 ohms (rated); in accordance with MIL-T-27. R-104 - Resistor, variable, 25,000 ohms 2 watts, screwdriver adjustable with lock nut pro- S-101 - Switch, normally open, two button with momentary contacts capab

42、le of carrying 1 T-101 - Transformer, audio frequency (a.f.); line type; primary impedance -25 ohms, 3.10.2 Jacks.- All jacks, microphone, head telephone and keys shall be insulated from the front panel to withstand a peak potential of 1000 volts, a.C., and shall otherwise be so constructed and moun

43、ted as to pre- clude shock to operating personnel when the contract equipment is operated under adverse climatic conditions aboard ship. 3.10.3 Relays.- The relay (see K-101, figure 2) shall be of such design as to provide reliable operation when the control equipment is subjected to shock and vibra

44、tion and when the relay is connected to an external power source of 12 volts (nominal ratings). The relay shall be capable of providing the foregoing reliability of operation when the external power source falls as low as 8.5 volts. Reliability of operation shall be pred- icated upon normal relay fu

45、nctioning, without sticking or chattering under the foregoing conditions. Addition- ally, the relays shall be capable of continuous operation, without abrogation of its reliability and without dam- age to its coil from over heating, when the external supply voltage is 15 volts d.c. (nominal rating).

46、 3.11 Controls.- Controls shall be considered in two groups: one group designated as operating and one group as semioperating. 3.11.1 Operating controls.- The following controls shall be mounted on the front panel. (See figure 1.) (a) Transmitter “ START-STOPn switch (b) “EARPHONE LEVEL“ control 4 L

47、icensed by Information Handling Services- uIL-C-2295qB 58 a ab 0151719 8 MIL-C -22954B(EC) , - _ _ - -I- _. - . - - - 3.1 1.1.1 Transmitter control.- The transmitter START-STOP” shall be wired as shown on figure 2 for s- 101. It shall function to apply or remove power to or from an externally connec

48、ted radio transmitter. The title “TRANSMITTER” shall appear on the front panel below the switch, The top push button shall be black with the subtitle, START” engraved on its face. The lower push button shall be used with the subtitle STOP” engraved on its face. 3.11.1.2 Power indicator.- Indicator l

49、amp, red lens (seeI-101, figure 2) shall be mounted above switch, 5-101 to indicate when power is applied to the externally connected transmitters. The title YPOWER” shall appear on the front panel above the indicator lamp bezel. 3.11.1.3 Carrier-on-indicator.- Indicator lamp, green lens (see 1-102, figure 2) shall be mounted on the front panel to indicate the carrier on condition of the externally connected radio transmitter. The title “CARRIER ON“ shall be arranged above the indicator lamp bezel. 3.1 1.1.4 Earphone level control.- An attenuator (see R-103, figure 2) shall be