NAVY MIL-C-60809 (2)-1978 CATAPULT AIRCRAFT EJECTION SEAT M9 REMANUFACTURED METAL PARTS ASSEMBLY《M9型飞机弹射座椅弹射器的再造金属组装部件》.pdf

1、MiL-C-60 8 O 9 AMENDMENT 2 11 October 1978 SUPERSEDING AMENDMENT1 . 1 November 1976 MILITARY SPECIFICATION CATAPULT, AIRCRAFT EJECTION SEAT: M9 REMANUFACTURED METAL PARTS ASSEMBLY ,This amendment forms a part of Military Specification MIL-C-60809, dated 20 March 1969, and is approved for use by all

2、Departments and Agencies of the Department of Defense. PAGE 3 3.3, line 2: Delete “100 psi“ and substitute “90 psi“. PAGE 4 * Add: “3.8 Tensile load. The nozzle assembly shall withstand a tensile load of 4000 pounds, minimum, applied between retainer tang and nozzle along the horizontal axis of the

3、nozzle assembly without separation or deformation of the components.“ PAGE 15 * Add: “4.2.5 Tensile load. Each nozzle assembly shall be subjected to the tensile load test. Failure of any assembly to comply with the requirements of 3.8 shall be cause for rejection of the assembly.“ * Add: “4.3.4 Tens

4、ile load. The load designated in 3.8 shall be applied and shall register on the dial indicator calibrated to the applied load.“ * The margins of this amendment are marked with an asterisk to indicate where changes (additions, modifications, corrections, deletions) from the previous amendment were ma

5、de. This was done as a convenience only and the Government assumes no liability whatsoever for any inaccuracies in these notations. Bidders and contractors are cautioned to evaluate the requirements of this document based on the entire content irrespective of the marginal notations and relationship

6、to the last previous amendment. Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: Station, Standardization Division (611), Indian Head, MD 20640 by using the self-addressed Standardization Documen

7、t Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter. Commanding Officer, Naval Ordnance Custodian: Preparing Activity: Navy - OS Air Force - 99 Project No. 1377-0668 Navy - OS *O.S. GOVERNMENT PRINTING OFFICE: IS7-1224IASO THE DOGUMENT CBN?AlNS A PAGES, Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-