NAVY MS14113 REV F-2013 TAPE IDENTIFICATION COLOR CODED FOR AIRCRAFT TIRES.pdf

1、MS14113F 19 February 2013 SUPERSEDING MS14113E 18 July 190 DETAIL SPECIFICATION SHEET TAPE, IDENTIFICATION, COLOR CODED, FOR AIRCRAFT TIRES This specification sheet is approved for use by all Departments and agencies of the Department of Defense. The requirements for acquiring the product described

2、herein shall consist of this specification sheet. INCH-POUND AMSC N/A FSC 2620 NOTE: DIMENSIONS ARE IN INCHES. FIGURE 1. Tire tape designation and arrangements. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS14113F 2 SCOPE: This specification shee

3、t establishes requirements for color coded aircraft tire identification tape which applies to all aircraft tires manufactured/retreaded for the Department of Defense. REQUIREMENTS: 1. All aircraft tires manufactured/retreaded for the Department of Defense shall be taped before delivery, with a circu

4、mferential band of one (1) inch, pressure-sensitive tape, completely around the centermost rib of the tread. 2. The ends of the tape shall overlap approximately four (4) inches for any splice and upon completion of the wrap. 3. The pressure-sensitive tape shall be constructed so that normal shipping

5、 and handling will not deface or remove it from the tire, but shall be easily removed in one continuous strip prior to installation. 4. The tape colors shall be in accordance with this specification sheet and FED-STD-595 (see notes 2 and 3). TABLE I. Tire year of manufacture designation. YEAR OF MAN

6、UFACTURE FED-STD-595 COLOR NAME FED-STD-595 COLOR NUMBER 1998 2005 2012 2019 2026 2033 GREY 26373 1999 2006 2013 2020 2027 2034 GREEN 14187 2000 2007 2014 2021 2028 2035 BLUE 15123 2001 2008 2015 2022 2029 2036 ORANGE 12246 2002 2009 2016 2023 2030 2037 YELLOW 13655 2003 2010 2017 2024 2031 2038 VIO

7、LET 17142 2004 2011 2018 2025 2032 2039 RED 11105 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS14113F 3 TABLE II. Manufacturer/retreader designation. MANUFACTURER/RETREADER FED-STD-595 COLOR NAME FED-STD-595 COLOR NUMBER Goodyear (retreader) RED

8、 11136 Goodyear (new and retreader tires) GREEN 14062 Dunlop aviation WHITE 17875 Michelin YELLOW 13538 Bridgestone BROWN 10080 5. The tape shall be a solid color to indicate the year of manufacture for both new and retread tires. The date of retreading shall not be used on the tape. 6. The year of

9、manufacture shall be printed on the tape. The numbers shall be printed in the center of the tape, in a neat legible manner and shall be repeated continuously for total length of the tape per given roll with three (3) inches spacing between printed dates. Year date numbers shall be three-quarters (3/

10、4) inch in height, one-eighth (1/8) inch in width and black or white in color. Spacing between the numbers shall be no less than one-eighth or more than one-quarter (1/4) high. The printing shall be indelible and resistant to any abrasion resulting from handling operations. 7. New tire identificatio

11、n tape: In addition to the solid color and printed date to indicate year of manufacture, the tape for new tires shall have one-half (1/2) inch wide horizontal stripe across the width of the tape in a color corresponding to the manufacturers identification color in table II. The horizontal stripe sha

12、ll be repeated every six (6) inches to indicate manufacturer of the tire. An optional three-sixteenth (3/16) inch white border is permitted around the stripe as shown on figure 1. 8. Retread tire identification tape: In addition to the solid color and printed date to indicate year of manufacture, th

13、e tape for retread tires shall have a diamond design printed on it in a color corresponding to the retreaders identification color outlined in table II. The diamond shall be no less than one and one-quarter (1-1/4) inches and no more than one and one-half (1-1/2) inches in length and approximately f

14、ifteen-sixteenths (15/16) of an inch in width and shall be repeated every six and one-half (6-1/2) inches to indicate the retreader as shown on figure 1. An optional three-sixteenth (3/16) inch white border is permitted around the diamond as shown on figure 1. Provided by IHSNot for ResaleNo reprodu

15、ction or networking permitted without license from IHS-,-,-MS14113F 4 9. All tape manufacturers shall be approved by the Navy cognizant engineering activity (see notes 4 and 5). Each tape shall also be verified as to its conformance with FED-STD-595 prior to use. NOTES: 1. Referenced documents are o

16、f the issue in effect on date of invitation for bids or request for proposal. 2. This specification sheet references the following colors from FED-STD-595: Grey - 26373 Green - 14187 Blue - 15123 Orange - 12246 Yellow - 13655 Violet - 17142 Red - 11105 Red - 11136 Green - 14062 White - 17875 Yellow

17、- 13538 Brown - 10080 3. Copies of FED-STD-595 are available online at https:/assist.dla.mil/quicksearch or https:/assist.dla.mil or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094. 4. Tire and retreading manufacturers are required to submit

18、 a ten (10) yard sample of each different color coded tape to the Navy cognizant engineering activity for approval. 5. Cognizant engineering activity - the designated - department engineering activities are as follows: Air Force 417 SCMS/GUEA, 6040 Gum Lane, Hill AFB, Utah 84056-5825 Navy Commanding

19、 Officer, Fleet Readiness Center Southwest, Bldg. 469, San Diego, CA 92135-7058, Attn: 43440 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS14113F 5 CONCLUDING MATERIAL Custodians: Preparing activity: Army AV Navy - AS Navy AS (Project 2620-2012-0

20、01) Air Force 99 DLA GS Review activities: Air Force 11, 70 DLA CC NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above by using the ASSIST Online database at https:/assist.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-