NEMA MW 780-2005 Returnable Packaging for 24 6 Magnet Wire Reels《24 X 6电磁线盘可回收包装》.pdf

1、 NEMA Standards Publication MW 780-2005 Returnable Packaging for 24 X 6 Magnet Wire Reels Published by: National Electrical Manufacturers Association 1300 North 17th Street, Suite 1752 Rosslyn, Virginia 22209 www.nema.org Copyright 2005 by the National Electrical Manufacturers Association. All right

2、s including translation into other languages, reserved under the Universal Copyright Convention, the Berne Convention for the Protection of Literary and Artistic Works, and the International and Pan American Copyright Conventions. NOTICE AND DISCLAIMER The information in this publication was conside

3、red technically sound by the consensus of persons engaged in the development and approval of the document at the time it was developed. Consensus does not necessarily mean that there is unanimous agreement among every person participating in the development of this document. The National Electrical

4、Manufacturers Association (NEMA) standards and guideline publications, of which the document contained herein is one, are developed through a voluntary consensus standards development process. This process brings together volunteers and/or seeks out the views of persons who have an interest in the t

5、opic covered by this publication. While NEMA administers the process and establishes rules to promote fairness in the development of consensus, it does not write the document and it does not independently test, evaluate, or verify the accuracy or completeness of any information or the soundness of a

6、ny judgments contained in its standards and guideline publications. NEMA disclaims liability for any personal injury, property, or other damages of any nature whatsoever, whether special, indirect, consequential, or compensatory, directly or indirectly resulting from the publication, use of, applica

7、tion, or reliance on this document. NEMA disclaims and makes no guaranty or warranty, express or implied, as to the accuracy or completeness of any information published herein, and disclaims and makes no warranty that the information in this document will fulfill any of your particular purposes or

8、needs. NEMA does not undertake to guarantee the performance of any individual manufacturer or sellers products or services by virtue of this standard or guide. In publishing and making this document available, NEMA is not undertaking to render professional or other services for or on behalf of any p

9、erson or entity, nor is NEMA undertaking to perform any duty owed by any person or entity to someone else. Anyone using this document should rely on his or her own independent judgment or, as appropriate, seek the advice of a competent professional in determining the exercise of reasonable care in a

10、ny given circumstances. Information and other standards on the topic covered by this publication may be available from other sources, which the user may wish to consult for additional views or information not covered by this publication. NEMA has no power, nor does it undertake to police or enforce

11、compliance with the contents of this document. NEMA does not certify, test, or inspect products, designs, or installations for safety or health purposes. Any certification or other statement of compliance with any health or safetyrelated information in this document shall not be attributable to NEMA

12、 and is solely the responsibility of the certifier or maker of the statement. MW 780-2005 Page i Copyright 2005 by the National Electrical Manufacturers Association. CONTENTS Page Forewordii Section 1 GENERAL 1.1 Scope 1 1.2 References 1 1.3 Definitions . 1 Section 2 DESIGN SPECIFICATIONS FOR ACCOMM

13、ODATING 24 X 6 REELS 2.1 Packaging System 2 2.2 Pallets . 2 2.2.1 General . 2 2.2.2 Dimensions . 2 2.2.3 Configuration. 2 2.2.4 Handling 2 2.3 Strength 2 2.3.1 Load 2 2.3.2 Storage 2 Section 3 MATERIALS 3.1 General . 3 3.2 Characteristics 3 Section 4 MARKING 4.1 Material Identification 4 4.2 Manufac

14、turer Identification . 4 MW 780-2005 Page ii Copyright 2005 by the National Electrical Manufacturers Association. Foreword The purpose of this Standard is to provide engineering guidelines to magnet wire manufacturers in the design and construction characteristics of returnable magnet wire packaging

15、 products. The information contained herein has been thoroughly reviewed by all suppliers of magnet wire packaging products known to be in production at the time of publication. This Standard is not intended to conflict with standards already in place. The issuance or existence of this Standards Pub

16、lication does not, in any respect, prevent, or restrict any member or non-member of NEMA from supplying their customers with magnet wire packaging systems not in conformance with its contents. This Standards Publication has been developed by the NEMA Magnet Wire Section, which periodically reviews i

17、t for any revisions necessary in recognizing changes in technology. Comments or proposed revisions are welcomed and should be submitted to: Vice President, Technical Services National Electrical Manufacturers Association 1300 North 17th Street, Suite 1752 Rosslyn, VA 22209 This Standards Publication

18、 was developed by the Magnet Wire Section of the National Electrical Manufacturers Association. At the time it was approved, the Magnet Wire Section had the following members: Bridgeport Insulated Wire Company, TheBridgeport, CT Elektrisola, Inc.Boscawen, NH Essex Group, Inc.Fort Wayne, IN Magnekon,

19、 s.a de c.v.Monterrey, Mexico MWS Wire IndustriesWestlake Village, CA Nexans Magnet WireMarkham, ON Canada Phelps Dodge Magnet Wire CompanyFort Wayne, IN Rea Magnet Wire Company, Inc.Fort Wayne, IN Universal Lighting TechnologiesGallman, MS MW 780-2005 Page 1 Copyright 2005 by the National Electrica

20、l Manufacturers Association. Section 1 GENERAL 1.1 SCOPE This Standard applies to products intended exclusively for the packaging/storage of magnet wire products. It provides guidelines for the minimum information required for the design and production of a returnable pallet generally made of a synt

21、hetic material, intended to accommodate primarily 24 x 6 reels. 1.2 REFERENCES In this publication, reference is made to the following publications. Copies are available from the sources indicated. National Electrical Manufacturers Association 1300 North 17th Street, Suite 1752 Rosslyn, VA 22209 NEM

22、A MW 1000-2003 Magnet Wire 1.3 DEFINITIONS reel: A cylindrical device with a top and bottom flange extending beyond the cylinder surface, for the purpose of holding wire for packaging, transportation, and de-reeling. pallet: The lower portion of the magnet wire packaging system, used for securing, o

23、r nesting, the bottom sides of magnet wire reels (see Figure 1-1). Figure 1-1 TYPICAL PACKAGING SYSTEMS FOR 24 X 6 REELS MW 780-2005 Page 2 Copyright 2005 by the National Electrical Manufacturers Association. Section 2 DESIGN SPECIFICATIONS FOR ACCOMMODATING 24 X 6 REELS 2.1 PACKAGING SYSTEM The mag

24、net wire packaging system shall be designed to be returnable and reusable, capable of securing reels placed on end, flange to flange on the pallet. 2.2 PALLETS 2.2.1 General The design of a single row system shall accommodate one to four reels having dimensions in accordance with NEMA MW 1000. A sys

25、tem accommodating a single layer of pallets arranged in a double row shall accommodate five to eight reels. 2.2.2 Dimensions The length and width shall be sufficient for compliance with 2.2.1. The height shall be nominally 6.25 in. 2.2.3 Configuration The surface where reels rest shall have a design

26、 that provides a positive locating system that limits movement of the reels during shipment, shall be designed to allow for secure stacking of pallets among themselves, and shall include a means of guiding banding straps. 2.2.4 Handling Pallets shall be capable of two-way entry by mechanized pallet

27、handling equipment, parallel with the flange orientation. 2.3 STRENGTH 2.3.1 Load 2.3.1.1 Single Row Loading Pallets supporting single row loading shall be capable of supporting a static load not less than 1,500 lb. 2.3.1.2 Double Row Loading Pallets supporting a single layer of reels in a double-ro

28、w arrangement shall be capable of supporting a static load not less than 2,500 lb. Pallets supporting multiple layers of reels in a double-row arrangement shall be capable of supporting a stacked static load of 15,000 lb. 2.3.2 Storage The design shall allow for pallets to be stored in a rack struct

29、ure, constructed with rack beams only, with a maximum of 38 in. between beams, and no decking. MW 780-2005 Page 3 Copyright 2005 by the National Electrical Manufacturers Association. Section 3 MATERIALS 3.1 GENERAL Plastic materials have been generally planned as the systems material, however materi

30、als used for magnet wire packaging systems shall not be limited to plastics. 3.2 CHARACTERISTICS The pallet material shall be recyclable and present no potential material conflict with magnet wire reels, wire, or wire insulation. MW 780-2005 Page 4 Copyright 2005 by the National Electrical Manufactu

31、rers Association. Section 4 MARKING 4.1 MATERIAL IDENTIFICATION The pallet shall be coded with the chasing arrows generally used as a code for signifying that a material is recyclable, as well as the recycling material number code of 1 through 7, and the material letters to indicate the material typ

32、e (e.g. PS, for polystyrene). 4.2 MANUFACTURER IDENTIFICATION All parts of a magnet wire packaging system shall have available space for either the individual wire manufacturers company logo or other form of identification such as a color strip and/or mark of some distinctive nature. Two spaces shall be provided (one on each of two opposing sides) for bar code labeling approximately 2 x 3 in. in size.