NF E04-130-1-1995 Technical drawings Seals for dynamic application Part 1 general simplified representation 《技术制图 动态应用的密封件 第1部分 通用简化表示法》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD ESF-M4D164-A-2009 POLYURETHANE (PUR) FOAM OPEN CELL FILTER TO BE USED WITH FORD WSS-M99P1111-A 《过滤器用开孔聚氨酯（PUR）泡沫 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESF-M4D169-A-2009 ACETAL RESIN TFE FIBER FILLED TO BE USED WITH FORD WSS-M99P1111-A 《四氯乙烯（TFE）纤维填充的缩醛树脂 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESF-M4D216-A-2009 NYLON (TYPE 612) MOLDING COMPOUND HEAT RESISTANT TO BE USED WITH FORD WSS-M99P1111-A 《耐热尼龙612成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESF-M4D217-A-2009 POLYSULFONE TO BE USED WITH FORD WSS-M99P1111-A 《聚砜 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESF-M4D226-A-2009 POLYURETHANE FOAM OPEN CELL TO BE USED WITH FORD WSS-M99P1111-A 《开孔聚氨酯泡沫 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESF-M4D236-A-2011 ABS MOLDING COMPOUND TO BE USED WITH FORD M99P1111-A 《丙烯腈模塑材料 与福特WSS-M99P1111-A 一起使用[使用 福特WSS-M4D827-B1]》.pdf

FORD ESF-M4D255-A-2011 ABS MOLDING COMPOUND - HIGH IMPACT TO BE USED WITH FORD WSS-M99P1111-A 《耐冲击力丙烯腈模塑材料 与福特WSS-M99P1111-A 一起使用[使用 福特WSS-M4D827-B1]》.pdf

FORD ESF-M4D26-A-2009 TUBING VINYL - EXTRUDED TO BE USED WITH FORD WSS-M99P1111-A 《乙烯树脂挤塑管 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESF-M4D27-A-2009 TETRAFLUOROETHYLENE TO BE USED WITH FORD WSS-M99P1111-A 《四氟乙烯 与标准FORD WSS-M99P1111-A一起使用 》.pdf