NF E29-902-3-1997 Flanges and their joints Dimensions of gaskets for PN-designated flanges Part 3 non-metallic PTFE envelope gaskets 《法兰及其接头 按PN标识的法兰用垫圈的尺寸 第3部分 非金属聚四氟乙烯封装垫圈》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD ESB-M28G15-A5-2000 GLASS SAFETY HEAT TREATED FLOAT-COATED REFLECTIVE FILM BRONZE COATING ON GRAY GLASS 4 8 MM TO BE USED WITH FORD WSS-M99P1111-A 《在4 0mm的灰色玻璃上涂有反射薄膜、青铜涂层的热处.pdf

FORD ESB-M28G15-A6-2006 GLASS SAFETY HEAT TREATED FLOAT-COATED REFLECTIVE FILM BRONZE COATING ON GRAY GLASS 5 6 MM TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD ESB-M28G15-A7-2006 GLASS SAFETY HEAT TREATED FLOAT-COATED REFLECTIVE FILM BRONZE COATING ON GRAY GLASS 4 0 MM TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD ESB-M28G15-A8-2006 GLASS SAFETY HEAT TREATED FLOAT-COATED REFLECTIVE FILM BRONZE COATING ON GRAY GLASS 3 2 MM TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD ESB-M2A109-B-2010 ALUMINUM EXTRUSION AND SHEET ALLOY TO BE USED WITH FORD WSS-M99P1111-A 《铝合金挤压料和板材 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESB-M2A113-B-2010 ALUMINUM-FORMABLE SHEET ALLOY TO BE USED WITH FORD WSS-M99P1111-A 《可成型的铝合金板 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESB-M2A125-A-2010 ALUMINUM EXTRUSION AND SHEET ALLOY (SAE AA 7129-T6) TO BE USED WITH FORD WSS-M99P1111-A 《铝合金挤压料和板材（SAE AA 7129-T6） 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESB-M2A83-B1-2010 ALUMINUM ALLOY EXTERIOR ORNAMENTATION TO BE USED WITH FORD WSS-M99P1111-A 《外部装饰用铝合金 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESB-M2A83-B2-2010 ALUMINUM ALLOY EXTERIOR ORNAMENTATION TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD ESB-M2A83-B1)《外部装饰用铝合金 与标准FORD WSS-M99P1111-A一起使用 列于标准FORD ESB-M.pdf