NF E44-155-2007 Hydraulic pumps - Technical fabrication and inspection conditions for the supplies of steel castings 《液压泵 钢铸件供应品用技术加工和检验条件》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

KS D ISO 10216-2012 Anodizing of aluminium and its alloys－Instrumental determination of image clarity of anodic oxidation coatings－Instrumental method《阳极化铝和铝合金 阳极氧化层图像明晰度的仪器测定 仪器法》.pdf

KS D ISO 10587-2002 Metallic and other inorganic coatings Test for residual embrittlement in both metallic-coated and uncoated externally-threaded articles and rods Inclined wedg.pdf

KS D ISO 10700-2008 Steel and iron－Determination of manganese content－Flame atomic absorption spectrometric method《钢铁 锰含量的测定 火焰原子吸收光谱分析法》.pdf

KS D ISO 10714-2001 Steel and iron-Determination of phosphorus content-Phosphovanadomolybdate spectrophotometric method《钢铁 磷含量的测定 磷钒钼酸盐分光光度法》.pdf

KS D ISO 10719-2006 Steel and iron－Determination of non-combined carbon content－Infrared absorption method after combustion in an induction furnace《钢铁 非化合碳含量的测定 感应炉燃烧后红外线吸收法》.pdf

KS D ISO 1118-2001 Aluminium and Aluminium alloys－Determination of titanium－Spectrophotometric chromotropic acid method《铝和铝合金 钛含量的测定 铬变酸分光光度法》.pdf

KS D ISO 11306-2009 Corrosion of metals and alloys－Guidelines for exposing and evaluating metals and alloys in surface sea water《金属和合金的腐蚀 暴露在海水表面的金属和合金的评定导则》.pdf

KS D ISO 11400-2001 Nickel ferronickel and nickel alloys－Determination of phosphorus Content－Phosphovanadomolybdate molecular absorption spectrometric method《镍、镍铁和镍合金 磷含量测定 二氧磷钒钼分子.pdf

KS D ISO 11426-2006 Determination of gold in gold jewellery alloys－Cupellation method(fire assay)《金合金首饰中含金量的测定 灰吹法(火试金法)》.pdf