NF E58-013-1995 Earth-moving machinery Zones of comfort and reach for controls 《土方机械 控制装置的舒适度和可达范围》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSF-M4D613-A-1988 POLYAMIDE (PA) 11 MOLDING COMPOUND (REPLACES ESK-M4D468-A)《聚酰胺11成型料 替代ESK-M4D468-A》.pdf

FORD WSF-M4D618-A-2011 ACETAL (POM) COPOLYMER MODIFIED HIGH IMPACT GRADE TO BE USED WITH FORD WSS-M99P1111-A 《改良的高抗冲级乙缩醛(POM)共聚物 与福特WSS-M99P1111-A 一起使用》.pdf

FORD WSF-M4D620-A-2011 POLYETHYLENE TEREPHTHALATE (PET) 40% GLASS FIBER MINERAL REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《聚乙烯对苯二甲酸脂(PET) 40%玻璃纤维 矿物增强模塑材料 .pdf

FORD WSF-M4D628-A-2011 POLYAMIDE (PA) 66 MOLDING COMPOUND 25 % GLASS FIBER REINFORCED FLAME RETARDED TO BE USED WITH FORD WSS-M99P1111-A 《25%玻璃纤维增强阻燃聚酰胺(PA)66模塑材料 与福特WSS-M99P111.pdf

FORD WSF-M4D629-A-2010 POLYETHYLENE TEREPHTHALATE (PET) MOLDING COMPOUND 15% GLASS FIBER REINFORCED TO BE USED WITH FORD WSS-M99P1111-A 《15%玻璃纤维增强的聚对苯二甲酸乙二酯(PET)成型料 与标准FORD WSS-.pdf

FORD WSF-M4D650-A2-2010 THERMOPLASTIC POLYURETHANE + POLYCARBONATE (TPUR+PC) BLEND MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《热塑性聚氨酯+聚碳酸酯（TPUR+PC）混合物成型料 与标准FORD WSS-M.pdf

FORD WSF-M4D691-A-2006 POLYAMIDE (PA) 66 35% LONG GLASS FIBER REINFORCED HEAT STABILIZED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A (Use WSB-M4D678-A)《35%长玻璃纤维增强的受热稳定的聚.pdf

FORD WSF-M4D718-A3-2010 POLYCARBONATE (PC) FILM CLEAR AND TRANSLUCENT TO BE USED WITH FORD WSS-M99P1111-A 《干净且透明的聚碳酸酯(PC)膜 与福特WSS-M99P1111-A 一起使用[使用 福特WSS-M4D1053-A1 福特WSS-M4D1.pdf

FORD WSF-M4D728-A2-2010 STYRENE MALEIC ANHYDRIDE (SMA) COPOLYMER MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《苯乙烯 马来酐（SMA）共聚物成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf