NF E60-133-1-1996 Test conditions for box type vertical drilling machines Testing of the accuracy Part 1 geometrical tests 《箱型立式钻床的试验条件 精确度试验 第1部分 几何尺寸试验》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

CSN 99 0652-1990 Vernier callipers reading to 0 02 mm《游标卡尺读数至0 02毫米》.pdf

CSN 99 0656-1990 Vernier callipser with fine adjustment Dimensions《带微调的游标卡尺 尺寸》.pdf

CSN 99 1031-1988 Vernier protractors Types Technical requirements《游标分度器 类型 技术要求》.pdf

CSN 99 3141-1988 Technical glass thermometers for temperature range from -90 to +600 φC Methods of verification《温度为90 至+600 C的技术玻璃温度计 验证方法》.pdf

CSN 99 4178-1990 Grain testers Technical requirements《谷粒分析仪 技术要求》.pdf

CSN 99 4179-1990 Grain testers Methods of verification and calibrating《谷粒分析仪 验证和校准方法》.pdf

CSN 99 4441-1989 Indenters for hardness testing machines General technical requirements《硬度测试机压头 一般技术要求》.pdf

CSN 99 6311-1990 Metal volume measures Secondary standards General technical requirements《金属容量测量 二级标准 一般技术要求》.pdf

CSN 99 6423-1988 Vertical cylindrical tanks Calibration by geometrical methods Verification《立式圆柱形水箱 几何法校准 验证》.pdf