NF E63-051-2006 Tool for pressing - Gliding pillars - Pillars with centre locking and locking ring 《冲压工具 滑动导柱 中间锁定导柱和锁定环》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D6896-2018 red 6875 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Used Engine Oils at Low Temperature.pdf

ASTM D6897-2003a Standard Test Method for Vapor Pressure of Liquefied Petroleum Gases (LPG) (Expansion Method)《液化石油气(LPG)蒸气压力测试验方法(膨胀法)》.pdf

ASTM D6897-2009 781 Standard Test Method for Vapor Pressure of Liquefied Petroleum Gases (LPG) (Expansion Method)《液化石油气(LPG)蒸汽压力用标准试验方法(膨胀方法)》.pdf

ASTM D6897-2016 red 7912 Standard Test Method for Vapor Pressure of Liquefied Petroleum Gases (LPG) (Expansion Method)《液化石油气 (LPG) 蒸气压力的标准试验方法 (膨胀法)》.pdf

ASTM D6898-2003 Standard Test Method for Evaluating Diesel Fuel Lubricity by an Injection Pump Rig《用喷油泵装置评价柴油润滑性的标准试验方法》.pdf

ASTM D6898-2003(2010) 6875 Standard Test Method for Evaluating Diesel Fuel Lubricity by an Injection Pump Rig《通过喷射泵设备评估柴油机燃料润滑性的标准试验方法》.pdf

ASTM D6898-2003(2016) 9171 Standard Test Method for Evaluating Diesel Fuel Lubricity by an Injection Pump Rig《用喷射泵钻机评价柴油润滑性的标准试验方法》.pdf

ASTM D6900-2003 Standard Test Method for Wet Adhesion of Latex Paints to a Gloss Alkyd Enamel Substrate《将乳胶涂料湿粘合到光泽醇酸磁漆底层的标准试验方法》.pdf

ASTM D6900-2010 1250 Standard Test Method for Wet Adhesion of Latex Paints to a Gloss Alkyd Enamel Substrate《乳胶漆对光亮醇酸磁瓷漆基底的湿粘合性的标准试验方法》.pdf