NF E64-109-1986 Woodworking machines Panel sizing saw machines Nomenclature 《木材加工机械 木板加工尺寸控制锯床 专用术语》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

EN 2044-2001 en Aerospace Series - Round Bars Drawn in Aluminium and Aluminium Alloys - Tolerance Class h 11 - Diameter 4 mm Less Than or Equal to D Less Than or Equal to 63 mm - D.pdf

EN 2045-2001 en Aerospace Series - Square Bars Drawn in Aluminium and Aluminium Alloys - Tolerance Class h 11 - Thickness 6 mm Less Than or Equal to a Less Than or Equal to 50 mm -.pdf

EN 2046-2001 en Aerospace Series - Hexagonal Bars Drawn in Aluminium and Aluminium Alloys - Tolerance Class h 11 - Width Across Flats 7 mm Less Than or Equal to a Less Than or Equa.pdf

EN 2047-2001 en Aerospace Series - Beaded L-Section Extruded in Aluminium Alloys - Dimensions《航空航天系列 挤压的铝合金珠状L截面 尺寸》.pdf

EN 2048-2001 en Aerospace Series - Extruded L-Section in Aluminium Alloys - Dimensions《航空航天系列 挤压的铝合金L截面 尺寸［代替 ASD-STAN PREN 2048］》.pdf

EN 2049-2001 en Aerospace Series - Extruded Channel Section in Aluminium Alloys - Dimensions《航空航天系列 挤压的铝合金槽形材 尺寸》.pdf

EN 205-2003 Adhesives - Wood adhesives for non-structural applications - Determination of tensile shear strength of lap joints 《胶粘剂 非结构上用木材胶粘剂 搭接接头的抗拉伸剪切强度的测定》.pdf

EN 205-2016 en Adhesives - Wood adhesives for non-structural applications - Determination of tensile shear strength of lap joints《胶粘剂-非结构用木材粘结剂-搭接接头拉力剪切强度的测量》.pdf

EN 2050-2001 en Aerospace series - Extruded T-section in aluminium alloys - dimensions《航空航天系列 挤压的铝合金T型材 尺寸［代替 ASD-STAN PREN 2050］》.pdf