NF E66-611-1983 Internal broaching tools Pull ends 《内拉削刀具 拉削端》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

JB T 11479-2013 内燃机 粉末冶金气门导管 技术条件.pdf

JB T 11480-2013 电涡流测功器.pdf

JB T 11481-2013 电力测功器.pdf

JB T 11486-2013 冶金除鳞系统用最小流量阀.pdf

JB T 11502-2013 气浮式垂直度测量仪.pdf

JB T 11505-2013 位移编码器CPE-Bus总线 双向串行通信协议规范.pdf

JB T 11515-2013 带刚性切割装置的电动草坪修边机.pdf

JB T 11571.2-2013 大型数控铣齿机 第2部分 技术条件.pdf

JB T 11572.1-2013 数控弧面蜗杆副铣齿机 第1部分 精度检验.pdf