NF F54-203-1980 Fixed railway installations Arrow for signals 《铁路固定设备 信号用箭头》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

HB 3517-1985 通孔用锥柄机用铰刀 d＝10~32mm.pdf

HB 3518-1985 通孔用套式机用铰刀 d＝25~80mm.pdf

HB 3521-1985 不通孔用直柄机用铰刀 d＝5~20mm.pdf

HB 3522-1985 不通孔用锥柄机用铰刀 d＝10~32mm.pdf

HB 3523-1985 不通孔用套式机用铰刀 d＝25~80mm.pdf

HB 3524-1985 孔加工工序间用的加工铝合金用的机用铰刀.pdf

HB 3525-1985 加工铝合金用直柄机用铰刀 d＝6~20mm.pdf

HB 3526-1985 加工铝合金用锥柄机用铰刀 d＝10~32mm.pdf

HB 3527-1985 加工铝合金用套式机用铰刀 d＝30~80mm.pdf