NF G00-029-1975 Knitting terminology Designation and graphic representation of the principal technical methods used in the production of weft-knitted fabrics 《针织术语 纬编织物生产用主要技术方法的名称.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

NBN F 42-001-1986 4375 《使用覆膜电极的人工弧形焊的供给源和TIG焊工艺》.pdf

NBN F 43-001-1986 3125 《焊接器械的耐力规格》.pdf

NBN F 43-002-1986 3750 Abmessungen der Rohlingrollenelektroden Dimensions of seam welding wheel blanks《焊接 焊接用滚花钮的半制品的尺寸》.pdf

NBN F 43-003-1986 4375 《用于凸缘焊接机器的台架的切槽》.pdf

NBN F 43-004-1986 8125 《焊接 用于点的焊接机器的电极的锥形装合 尺寸》.pdf

NBN F 51-001-1976 2500 《由铝和铝合金及镁和镁合金融合对焊的接头 厚度在5至50MM之间，使用X 射线检测的推荐方法》.pdf

NBN F 51-002-1975 0000 《高质量的图像显示器的建议类型的用法》.pdf

NBN F 51-005-1986 3750 《用于非破坏性测试的高质量的X线图像显示器 原理和识别》.pdf

NBN F 51-006-1986 8750 《焊接 通过熔化进行的焊接的X线观察的建议实践 第1部分：通过厚度小于或等于50毫米的钢块的熔化进行的端对端的焊接》.pdf