NF H35-068-1991 Bottling industry Glass bottles Press-screw neck glass finish 31 《制瓶工业 玻璃瓶 31型压力螺纹颈玻璃瓶口》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

EN 60603-10-1998 en Connectors for Frequencies Below 3 MHz for Use with Printed Boards Part 10 Two-Part Connectors for Printed Boards for Basic Grid of 2 54 mm (0 1 in) Inverted Ty.pdf

EN 60603-12-1998 en Connectors for Frequencies Below 3 MHz for Use with Printed Boards Part 12 Detail Specification for Dimensions General Requirements and Tests for a Range of Soc.pdf

EN 60603-13-1998 en Connectors for Frequencies Below 3 MHz for Use with Printed Boards Part 13 Detail Specification for Two-Part Connectors of Assessed Quality for Printed Boards f.pdf

EN 60603-14-1999 en Connectors for Frequencies Below 3 MHz for Use with Printed Boards Part 14 Detail Specification for Circular Connectors for Low-Frequency Audio and Video Applic.pdf

EN 60603-2-1998 en Connectors for Frequencies Below 3 MHz for Use with Printed Boards Part 2 Detail Specification for Two-Part Connectors with Assessed Quality for Printed Boards f.pdf

EN 60603-3-1998 en Connectors for Frequencies Below 3 MHz for Use with Printed Boards Part 3 Two-Part Connectors for Printed Boards Having Contacts Spaced at 2 54 mm (0 1 in) Centr.pdf

EN 60603-4-1998 en Connectors for Frequencies Below 3 MHz for Use with Printed Boards Part 4 Two-Part Connectors for Printed Boards Having Contacts Spaced at 1 91 mm (0 075 in) Cen.pdf

EN 60603-5-1998 en Connectors for Frequencies Below 3 MHz for Use with Printed Boards Part 5 Edge-Socket Connectors and Two-Part Connectors for Double-Sided Printed Boards with 2 5.pdf

EN 60603-6-1998 en Connectors for Frequencies Below 3 MHz for Use with Printed Boards Part 6 Edge-Socket Connectors and Printed Board Connectors with 2 54 mm (0 1 in) Contact Spaci.pdf