NF J65-108-1958 Shipbuilding Shaft lines Keys and keyways for tapers on propeller-shafts Diameters 100 mm to 680 mm Alternative 《造船工业 轴线 直径为110mm－680mm的螺旋桨轴上锥形体的键和键槽 可选择的》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

JB T 8701-1998 制冷用板式换热器.pdf

JB T 8702-1998 屋顶式风冷空调(热泵)机组.pdf

JB T 8705-1998 50MW 以下汽轮发电机无中心孔转子锻件.技术条件.pdf

JB T 8705-2014 50MW以下汽轮发电机无中心孔转子锻件 技术条件.pdf

JB T 8706-1998 50～200MW汽轮发电机无中心孔转子锻件.技术条件.pdf

JB T 8706-2014 50MW~200MW汽轮发电机无中心孔转子锻件 技术条件.pdf

JB T 8707-1998 300MW以上汽轮机无中心孔转子锻件.技术条件.pdf

JB T 8707-2014 300 MW以上汽轮机无中心孔转子锻件 技术条件.pdf

JB T 8708-1998 300～600MW汽轮发电机无中心孔转子锻件.技术条件.pdf