NF L22-437-2000 Aircraft bolts and nuts - Nuts hexagonal palin reduced height normal across flats with locking holes ISO M or ISO MJ threads 4H5H or 5H tolerance class according to.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

NC 06-29-1968 Clearence holes for bolts《干净的螺钉孔》.pdf

NC 06-30-1968 Radii under the head of metric bolts and screws《公制螺钉和螺丝头下的半径》.pdf

NC 06-31-1968 Tips of metric bolts and screws《公制螺钉和螺丝的尖端》.pdf

NC 06-32-1968 Outlet of metric thread《公制螺纹的出口》.pdf

NC 06-33-1968 Outlet splines for metric thread《公制螺纹的出口齿条》.pdf

NC 06-34-1968 Holes for metric thread《公制螺纹的孔》.pdf

NC 06-35-1968 Holes for unified inch thread《统一标准螺纹的孔》.pdf

NC 06-36-1968 Blind holes《盲孔》.pdf

NC 06-37-1968 Thread lengths for metric bolts screws and studs《公制螺钉螺纹长度 螺栓和大头钉》.pdf