NF L48-135-1972 In-service interchangeability Flanges for level indicators fuel pumps etc (ISO thread profile and tolerances) 《使用的互换性 燃料液面指示器、燃油泵等接头用法兰（ISO 螺纹牙性和公差）》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

NC 10-72-1988 Metallurgy Determination of Compression Strength Testing Method《冶金术 压缩浓度测定》.pdf

NC 11-02-1988 Mechanical Industry Metric and Morse Tapers for Tools Main Dimensions《机械工业 工具主要尺寸的公制和莫尔斯锥度》.pdf

NC 11-03-1967 Reduction sleeves with Morse Tapers《带莫尔斯锥度还原袖》.pdf

NC 11-04-1967 Extension Sockets with Morse Tapers《有莫氏推拔的拖苏板》.pdf

NC 11-78-1984 Cutting Treatraent Manual Cylidrical Reamers Parameters and Main Dimensions《切割处理 手工圆柱绞床 参数和主要尺寸》.pdf

NC 11-79-1984 Machine Tools Semi-automatic Horizontal Chuck Multi-Screw Spindle Lathes Rigidity Control Methods《机械工具 半自动水平卡盘多螺丝锭子车床 硬度控制方法》.pdf

NC 11-80-1984 Machine Tools Automatic Single-Spindle Turret Lathes Control Methods of Accuracy and Rigidity《机械工具 半自动水平卡盘多螺丝锭子车床 硬度和精度控制方法》.pdf

NC 11-81-1985 Machine Tools Parallel Surfacing and Screw-Cutting Lathes Verification of Accuracy and Rigidity《机械工具 平行曲面和螺丝切割车床 精确度和硬度的验证》.pdf

NC 11-82-1985 Cutting Treatment Normal Tapper Shank Twist Drill from 6 up to 80 mm Diameter Pararaeters and Main Dimensions《切割处理 6-80毫米常规敲杆麻花钻 直径 参数和主要尺寸》.pdf