NF M60-704-1992 Decontamination of radioactively contaminated surfaces Testing of decontamination agents for textiles 《放射性污染表面的去污 纺织品用去污剂的检测》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD ESL-M3D128-A3-2016 PHENOLIC (PF) GLASS FIBER AND MINERAL REINFORCED COMPRESSION MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD ESL-M3D128-A1).pdf

FORD ESL-M3P30-A-2003 PHOSPHATE BASE BONDED PTFE RESIN COATING - STEEL TO BE USED WITH FORD WSS-M99P1111-A 《钢制品用磷酸盐基粘合的聚四氟乙烯（PTFE）树脂涂料 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD ESL-M4D197-A2-2012 POLYETHYLENE HIGH DENSITY BLOW MOLDING COMPOUND GASOLINE RESISTANT TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD ESL-M4D359-A3-2010 THERMOPLASTIC POLYESTER NON-REINFORCED PBT - HIGH IMPACT MODIFIED TO BE USED WITH FORD WSS-M99P1111-A 《高抗冲改性非增强热塑性聚对苯二甲酸丁二醇酯（PBT） 与标准FORD WSS-M99P1111-A一.pdf

FORD ESL-M4D414-A-2008 POLYETHYLENE HIGH DENSITY INJECTION MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《聚乙烯高密度注塑成型料 与标准FORD WSS-M99P1111-A一起使用 [使用 FORD WSS-M4D955-A FO.pdf

FORD ESL-M4D533-A-2006 NYLON (PA) 6 66 COPOLYMER 33% GLASS FIBER REINFORCED TO BE USED WITH FORD WSS-M99P1111-A (Use WSK-M4D673-A)《33%玻璃纤维增强的尼龙(PA)6 66共聚物 与标准FORD WSS-M99P1111-A.pdf

FORD ESL-M4G273-A-2014 SEALANT SILICONE RUBBER - AMINE CURE TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD ESL-M5G51-A-1990 DEADENER ELASTOMER BASED EXTRUDED PRESSURE SENSITIVE《压敏挤塑弹性体基隔音材料》.pdf

FORD ESL-M7C58-A-2012 RUST PREVENTIVE THIN FILM - ALUMINUM PIGMENTED TO BE USED WITH FORD WSS-M99P1111-A .pdf