NF M87-236-2006 Petroleum and natural gas industries - Downhole equipment - Lock mandrels and landing nipples 《石油和天然气工业 下井设备 锁芯轴和落地接头》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

EN ISO 20848-1-2008 en Packaging - Plastics drums - Part 1 Removable head (open head) drums with a nominal capacity of 113 6 l to 220 l《包装 塑料鼓形桶 第1部分 标称容量为113 6L～220L的可拆卸盖式(密封盖)鼓形桶.pdf

EN ISO 20848-2-2008 en Packaging - Plastics drums - Part 2 Non-removable head (tight head) drums with a nominal capacity of 208 2 l and 220 l《包装 塑料鼓形桶 第2部分 标称容量为208 1L和220L 不可拆卸的盖式.pdf

EN ISO 20848-3-2008 en Packaging - Plastics drums - Part 3 Plug bung closure systems for plastics drums with a nominal capacity of 113 6 l to 220 l《包装 塑料鼓形桶 第3部分 标称容量113 6L～220L塑料鼓.pdf

EN ISO 20857-2013 en Sterilization of health care products - Dry heat - Requirements for the development validation and routine control of a sterilization process for medical devic.pdf

EN ISO 20863-2004 en Footwear - Test method for stiffeners and toepuffs - Bondability《鞋靴 补强胶条和皮鞋包头的试验方法 粘合程度 ISO 20863-2004》.pdf

EN ISO 20863-2018 en Footwear - Test methods for stiffeners and toepuffs - Bondability.pdf

EN ISO 20864-2004 en Footwear - Test methods for stiffeners and toepuffs - Mechanical characteristics《鞋靴 补强胶条和皮鞋包头的试验方法 机械性能 ISO 20864-2004》.pdf

EN ISO 20869-2010 en Footwear - Test methods for outsoles insoles lining and insocks - Water soluble content《鞋靴 外底 内底 衬里和内袜的试验方法 水溶量［代替 CEN EN 12748］》.pdf

EN ISO 20877-2011 en Footwear - Test methods for whole shoe - Thermal insulation《鞋类 整鞋试验方法 隔热 鞋类 整鞋试验方法 隔热 鞋类 整鞋试验方法 隔热 鞋类 整鞋试验方法 隔热 鞋类 整鞋试验方法 隔热 鞋类 整鞋试验方法 .pdf